299C Compact Track Loader
Overview of the 299C
Fully suspended, steel embedded rubber track undercarriage provides a smooth ride, better load retention and greater productivity. Spacious, sealed and pressurized cab, low ground pressure, highly durable components and excellent drawbar performance help you get more done and increase your bottom line.
- Engine Model
- CatŪ C3.4T
- Net Power
- 90 hp
- Rated Operating Capacities: 50% Tipping Load
- 4150 lb
- Rated Operating Capacities: 35% Tipping Load
- 2905 lb
299C Compact Track Loader
EngineEngine Model: CatŪ C3.4T
Net Power: 90 hp
Gross Power: 94 hp
Gross Power SAE J1995: 94 hp
Net Power SAE 1349: 90 hp
Displacement: 201 in3
Bore: 3.7 in
Stroke: 4.7 in
Operating SpecificationsRated Operating Capacities: 50% Tipping Load: 4150 lb
Rated Operating Capacities: 35% Tipping Load: 2905 lb
Ground Contact Area: 2504 in2
Ground Pressure: 4.3 psi
Tipping Load: 8338 lb
Breakout Force, Tilt Cylinder: 7308 lb
Rated Operating Capacity with Optional Counterweight: 4418 lb
Power TrainTravel Speed Forward: 5 mph
Travel Speed Reverse: 5 mph
Travel Speed Reverse - 2-Speed: 8.5 mph
Travel Speed Forward - 2-Speed: 8.5 mph
WeightsOperating Weight: 10730 lb
Service Refill CapacitiesCooling System: 3.7 gal
Engine Crankcase: 2.6 gal
Fuel Tank: 26 gal
Hydraulic System: 15 gal
Hydraulic Tank: 11 gal
DimensionsLength of Track on Ground: 69.6 in
Overall Length of Track: 89.4 in
Length w/Bucket on Ground: 150.4 in
Length w/o Bucket: 122.1 in
Height to Top of Cab: 83.3 in
Vehicle Width: 78 in
Max. Overall Height: 162.3 in
Bucket Pin Height at Max. Lift: 129.4 in
Bucket Pin Height at Carry Pos.: 7.7 in
Reach at Max. Lift/Dump: 30 in
Clearance at Max. Lift/Dump: 98.1 in
Ground Clearance: 9.1 in
Departure Angle: 38°
Maximum Dump Angle: 51°
Turn Radius from Ctr - Rear: 69.9 in
Turn Radius from Ctr - Coupler: 57.9 in
Turn Radius from Ctr - Bucket: 91.1 in
Max. Reach w/Arms Parallel: 49.9 in
Rack Back Angle at Max Height: 83°
Bucket Pin Reach at Max Lift: 14.7 in
Hydraulic SystemHydraulic Flow: Standard
Loader Hydraulic Pressure: 3335 psi
Loader Hydraulic Flow: 22 gal/min
Hydraulic Power: 42.8 hp
Hydraulic Flow: High Flow XPS
Max. Loader Hydraulic Pressure: 4061 psi
Max. Loader Hydraulic Flow: 33 gal/min
CabROPS: SAE J1040 MAY94, ISO 3471:1994
FOPS: SAE J1043 SEPT87, ISO 3449:1992 Level I
FOPS Level II: SAE J231 JAN81, ISO 3449:1992 Level II
299C Compact Track Loader
Superior comfort to keep you productive throughout the work day.
Sealed and Pressurized Cab
Comfort and ease of operation have been designed into every aspect of the operator station. The wide, spacious interior and uncluttered floor provide a comfortable work environment with excellent head, shoulder and leg room to keep productivity high and fatigue low. Operators spend long hours in the machine. The new sealed and pressurized cab keeps dust out and clean air in for greater operator comfort. Reduced sound levels within the cab also help reduce fatigue.
Seat Mounted Joystick Controls
Ergonomic, seat mounted joystick controls enable a wide range of comfortable operating positions for operators of any size. The seat and controls are independently adjustable to meet the specific needs of the operator.
Air Ride Seat Available
An air ride seat provides an unparalleled level of comfort in a compact track loader.
Advanced Machine Information and Control System
The optional Advanced Machine Information and Control System (AMICS) provides easy to read analog gauges for hydraulic oil and engine coolant temperature. The electronic display provides additional operating information such as engine speed, job clock and diagnostic service codes. Selectable Work Speed Control and Selectable Implement Control allow the operator to dial in his machine to maximize production.
Additional Features for Maximum Comfort
- Easy to read instrument panels
- Optional air conditioner and heater for greater comfort in extreme conditions
- Optional Selectable Pattern Control which allows the operator to select the control pattern they are most familiar with for greater productivity.
Steel Embedded Rubber Track Undercarriage
Industry-first suspended undercarriage for versatility, durability, and comfort
Low Ground Pressure
Caterpillar introduces the industrys first fully suspended undercarriage for a Compact Track Loader. The heavy-duty torsion axles suspend the CTL undercarriage and can move independently relative to the machine and each other. These axles absorb most of the shock to the undercarriage, machine and operator, especially over rough terrain. This means smooth travel, even at high speeds, as well as better load retention and greater productivity. The tread design ensures a smooth ride and a great combination of traction and fl otation. The C-Series CTL offers ground pressures ranging from 27.2 kPa (4.0 psi) to 29.6 kPa (4.3 psi).
The CTL undercarriage system features highly durable and easily maintained components. Steel imbeds provide a rigid support for the entire width of the track and provide excellent durability in a wide variety of applications. Continuously wound cables hold these imbeds in place and provide tensile strength, ensuring the track does not stretch. Following the same philosophy as Caterpillar Track-Type Tractors, the elevated external positive drive system keeps drive components away from ground debris. Planetary final drive motors improve torque and drawbar performance, delivering more power to the ground. Steel rollers with metal face seals provide maximum protection for wheel bearings resulting in long-term durability and reliability in even the toughest conditions. The simple recoil grease tensioning system allows quick track tension adjustment.
Vertical Lift Linkage
Built for tough working conditions.
Vertical Lift Design
The 299C features the vertical lift design which provides extended reach and lift height for quick and easy truck loading and material placement. The lift height is 3286 mm (129 in) on the 299C.
Aggressive performance with fuel efficiency.
The high performance power train provides high engine horsepower and torque. The C-Series features the Cat C3.4 DIT engine--a rugged, reliable engine that meets worldwide emissions requirements. The 299C is equipped with an Air-to-Air After Cooler (ATAAC) for better fuel efficiency and lower emissions as well as increased horsepower and torque.
Hand and Foot Throttles
Hand and foot throttles allow the operator to match engine speed to the task. The hand throttle is ideal for jobs requiring constant engine speed such as cold planing, trenching or snow blowing. The foot throttle lets the operator vary engine speed and minimize fuel consumption for other tasks such as load and carry, truck loading, grading and dozing.
Electronic Torque Management
The Electronic Torque Management system maximizes power to the ground and prevents the engine from stalling in tough digging and dozing applications for maximum productivity. The system allows part throttle operation which provides smoother machine operation and reduces fuel consumption.
Selectable Work Speed Control
The optional Selectable Work Speed Control lets you select the ground speed that is best suited for the application. This feature is useful in operations such as trenching and cold planing that require precise machine control at relatively slow and constant speeds.
Exceptional lift, breakout and power to meet your needs.
Maximum power and reliability are built into the Cat Compact Track Loader hydraulic system. In addition to providing power to the tracks, this system also powers the loader lift and tilt functions, powers the auxiliary circuit to drive work tools and drives the engine cooling fan. The C-Series hydraulic system features increased lift and tilt breakout forces allowing you to move more material and get more done. The continuous demand fan provides improved fuel efficiency, increased horsepower, reduced sound levels and improved cold weather performance. Cat ToughGuard hoses increase reliability and durability. High capacity hydraulic tank and side-byside cooling package keep components cool for maximum durability.
High Flow XPS
High flow XPS hydraulic system is available on all models for greater machine versatility. Maximum performance can be maintained regardless of the work tool speed or conditions with this load sensing, pressure compensating system. Caterpillar cooling systems are sized to allow the operator to continuously power high flow work tools in conditions that cause competitive machines to overheat.
Selectable Implement Control
The Selectable Implement Control option with three levels of control gives the operator the ability to adjust the responsiveness and speed of the lift and tilt functions for more precise implement control.
Standard Two Speed
Two speed, offered as standard equipment, increases top speed up to 13.6 km/h (8.5 mph) allowing you to finish jobs faster.
Do more jobs with one machine using Cat Work Tools.
The Right Tool for the Job
Designed and built for optimum performance and durability, Cat Work Tools deliver high productivity in a variety of applications to maximize versatility:
- Blades (angle, dozer)
- Buckets (general purpose, high capacity, dirt, utility, light material, multi purpose, industrial grapple, utility grapple)
- Brooms (angle, pickup, utility)
- Cold Planers
- Forks (pallet, industrial grapple, utility grapple, utility)
- Hydraulic Hammers
- Landscape Tillers
- Landscape Rakes
- Material Handling Arm
- Power Box Rakes
- Snow Blowers
- Stump Grinders
- Vibratory Compactors
- Wheel Saws
Work tools can be changed quickly and easily with the Cat Compact Track Loaders quick coupler system. The standard quick coupler features manual engagement and disengagement of work tools using two high leverage handles. The optional hydraulic quick coupler allows the operator to quickly change tools without leaving the cab.
AccuGrade Grade Control System for Skid Steer, Multi Terrain and Compact Track Loaders
Common to AccuGrade systems for Track-Type Tractors and Motor Graders, this deeply integrated solution automates the machines electrohydraulic controls to achieve a consistent grade across the work site, improve accuracy and increase productivity, ultimately lowering operating and material costs.
Simplified service and maintenance save you time and money.
Convenient service features make maintenance easy, reducing your downtime:
- Rear door opens 90 degrees for easy access to both sides of the engine.
- Cab tilts rearward for easy access to all hydraulic pumps, motors, valves, lines and hydraulic tank.
- Daily maintenance points are easily accessible.
- Wires are color coded and numbered for easy identification.
- SOS oil sampling valves are standard to allow regular monitoring of the hydraulic oil quality.
Unmatched support makes the difference.
Your Cat dealer is ready to assist you with your purchase decision and everything after. Make detailed comparisons of the machines you are considering before you buy with estimates of component life, preventative maintenance and the true cost of production. Flexible financing packages are available to meet your needs. Repair option programs guarantee the cost of repairs up front. Your Cat dealer can evaluate the cost involved in repairing, rebuilding and replacing your machine so you can make the right choice. Nearly all parts available at the dealer parts counter to lower your machine downtime. Operator training can improve your operators techniques and boost your profits.
299C Compact Track Loader
- OPERATOR ENVIRONMENT
- POWER TRAIN
- MANDATORY EQUIPMENT