Menu
View Details

Tap to Call

226D Skid Steer Loader

226D Skid Steer Loader

At a Glance

Engine Model
Cat C2.2 CRDI
Net Flywheel Power
65.8 HP
Rated Operating Capacity
1550 lb
Operating Weight
5705 lb
Request a Demo

Overview

The Cat® 226D Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Engine

+ -
Engine Model Cat C2.2 CRDI
Net Flywheel Power 65.8HP
Gross Power - SAE J1995 67.1HP
Net Power - SAE 1349 65.8HP
Displacement 134.3inÂł
Stroke 3.9in
Bore 3.3in
Net Power - ISO 9249 66.5HP
Peak Torque - 1,500 rpm - SAE J1995 153ft·lbf

Operating Specifications

+ -
Rated Operating Capacity 1550lb
Tipping Load 3100lb
Breakout Force - Tilt Cylinder 3983lb
Rated Operating Capacity with Optional Counterweight 1650lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 Ă— 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic

Weights

+ -
Operating Weight 5705lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 Ă— 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic

Dimensions

+ -
Wheel Base 41.5in
Height - Top of Cab 79.8in
Vehicle Width over Tires 58.9in
Ground Clearance 6.9in
Departure Angle 27.9°
Maximum Dump Angle 46.7°
Reach - Maximum Lift/Dump 21in
Bumper Overhang - Behind Rear Axle 35.2in
Bucket Pin Height - Carry Position 8.5in
Bucket Pin Height - Maximum Lift 110.9in
Clearance at Maximum Lift and Dump 81.8in
Length - With Bucket on Ground 127.3in
Length - Without Bucket 99.4in
Maximum Overall Height 143.8in
Maximum Reach - With Arms Parallel to Ground 50.7in
Rack Back Angle - Maximum Height 88.9°
Turning Radius from Center - Bucket 77.8in
Turning Radius from Center - Coupler 43.5in
Turning Radius from Center - Machine Rear 59.6in
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 Ă— 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic

Cab

+ -
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
FOPS Level II ISO 3449:2005 Level II

Service Refill Capacities

+ -
Cooling System 3.2gal (US)
Engine Crankcase 2.6gal (US)
Fuel Tank 15.1gal (US)
Hydraulic System 11.9gal (US)
Hydraulic Tank 9gal (US)
Chain Box - Each Side 1.8gal (US)

Noise Level

+ -
Inside Cab* 83dB(A)
Outside Cab** 102dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Hydraulic System

+ -
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 50.9HP
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 26gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 3336psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 35.5HP
Hydraulic Flow - Standard - Loader Hydraulic Flow 18gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3336psi

Power Train

+ -
Travel Speed - Forward or Reverse - One Speed 7.6mile/h
Travel Speed - Forward or Reverse - Two Speed Option 11.1mile/h

Air Conditioning System

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.