325D FM Forest Machine
At a Glance
|
|
|
|
|
|
|
|
Overview
Engine
+ -| Engine Model | Cat® C7 ACERT™ |
| Net Flywheel Power | 204HP |
| ISO 9249 | 204HP |
| Bore | 4.3in |
| Stroke | 5in |
| Displacement | 440in³ |
| SAE J1349 | 204HP |
Weights
+ -| General Forestry - HW | 81466lb |
| Log Loader (U/U) | 92786lb |
| Log Loader (O/U) | 92229lb |
Swing Mechanism
+ -| Swing Torque - General Forestry | 63664lb/ft |
| Swing Speed - General Forestry | 10r/min |
Service Refill Capacities
+ -| Fuel Tank | 137.4gal (US) |
| Fuel Tank - Optional Auxiliary Right Front | 108.3gal (US) |
| Optional Counterweight with Fuel Tank | 129.5gal (US) |
| Maximum Fuel with All Optional Tanks | 375.2gal (US) |
| Cooling System | 7.9gal (US) |
| Engine Oil | 9gal (US) |
| Swing Drive | 2.6gal (US) |
| Hydraulic System - Including Tank | 68.7gal (US) |
| Hydraulic Tank | 38gal (US) |
| Final Drive - Each | 2gal (US) |
Standards
+ -| Brakes | SAE J1026 APR90 |
| FOPS | ISO 3449:2005 (LEVEL II), ISO 8083:2006 |
| Cab ROPS/FOGS/OPS/TOPS/FOPS | SAE J1356 FEB88 SAE J1084/ISO 8084/ROPS: ISO 8082-2 OR-OSHA 437-007-0775/WCB G602, G603, G604, G608 |
Hydraulic System
+ -| Main Implement System - Maximum Flow (2x) | 62.1gal/min |
| Maximum Pressure - Travel | 5075psi |
| Maximum Pressure - Swing | 3988psi |
| Pilot System - Maximum Flow | 9.5gal/min |
| Pilot System - Maximum Pressure | 597psi |
| Boom Cylinder - Bore | 5.5in |
| Boom Cylinder - Stroke | 55.4in |
| Stick Cylinder - Bore | 5.9in |
| Stick Cylinder - Stroke | 64.8in |
| Maximum Pressure - Implements | 5075psi |
Log Loader Linkage
+ -| Boom Cylinder - Bore | 5.9in |
| Boom Cylinder - Stroke | 55.1in |
| Stick Cylinder - Bore | 7.1in |
| Stick Cylinder - Stroke | 65in |
| Under/Under Heel Cylinder - Bore | 5.9in |
| Under/Under Heel Cylinder - Stroke | 45.5in |
| Over/Under Heel Cylinder - Bore | 6.3in |
| Over/Under Heel Cylinder - Stroke | 57.7in |
Excavator Linkage
+ -| CB2 Family Bucket Cylinder - Bore | 5.3in |
| CB2 Family Bucket Cylinder - Stroke | 45.5in |
Drive
+ -| Maximum Drawbar Pull | 71264lb |
| Turtle Travel Speed | 1.55mile/h |
| Rabbit Travel Speed | 3mile/h |
Standard Equipment:
Electrical
+ --
80 Ampere alternator
-
4 Front working lights, cab top mounted
-
2 Front working lights, RF corner guard
-
2 Front working lights, riser mounted
-
2 Front working lights, stick/boom mounted
-
1 Left side working light, cab mounted
-
1 Rear working light, cab mounted
-
Horn
-
Product Link (PL 321 SR)
Operator Environment
+ --
Purpose built forestry cab with 8 lights and all scratch resistant polycarbonate windows
-
Air suspension seat with adjustable armrest, retractable seatbelt, headrest and lumbar support
-
Integrated seat, console and joystick type controls
-
Language display monitor with gauges
-
Warning information Filter/fluid change information Working hour information Machine condition Error code and tool mode setting information Start up level check for hydraulic oil, engine oil and engine coolant
-
Full time clock on monitor (2 weeks)
-
Seat mounted joystick with extra functions for grapple
-
Fixed polycarbonate skylight with retractable sun shade
-
Interior lighting
-
Lower and upper windshield wipers and washer
-
Positive filtered ventilation, pressurized cab with bi-level air conditioner, heater and defroster with manual control
-
Forced air fan
-
Left side fresh air window with screen
-
Behind seat storage tray with tie down points
-
1 Fire extinguisher mount
-
Secondary roof exit openable from inside and outside
-
2 Coat hooks
-
Literature holder
-
Cup holder
-
Neutral lever for all controls
-
Travel control pedals with removable hand levers
-
Washable floor mat
-
Radio/CD player (12V)
-
1 Converter/2 sockets - 12V-10A power supply
Power Train
+ --
Cat C7 with ACERT™ Technology U.S. EPA emissions compliant with 24-volt electric starting and air intake heater
-
Automatic engine speed control with one touch low idle
-
Two speed auto-shift travel
-
Water separator in fuel line
-
Easy clean swing out radiator door screen
-
Muffler
Undercarriage
+ --
Hydraulic track adjusters
-
349 HE GLT4 undercarriage with grease lubricated seals
-
Idler and full-length track shoe support
Other Standard Equipment
+ --
Heavy-duty upper frame with catwalks, bottom guards, heavy duty side doors
-
Core hydraulic lines and controls with standard main valves on upper structures
-
Door locks, cap locks and Cat one key security system
-
Automatic swing parking brake
-
Travel alarm
-
Counterweight with lifting eye
-
Right front corner guard with tree deflector
325d Fm General Forestry Arrangement Also Includes:
+ --
Forestry cab, hydraulic tilt 0.46 m (18 inch) riser
-
High-wide undercarriage
-
High drawbar
-
Heavy-Duty recoil springs
-
Heavy-Duty track roller frame
-
Heavy-Duty travel motor covers
-
Heavy-Duty swivel guard
-
Forestry Heavy-Duty upper frame with catwalk
-
Heavy-Duty bottom guard
-
Heavy-Duty side doors
-
Right front corner guard
-
Travel alarm and full length shoe support
325d Fm Log Loader Arrangement Also Includes:
+ --
Forestry cab, side entry
-
Hydraulic tilt 1.2 m (48 inch) riser
-
High-wide undercarriage
-
High drawbar
-
Heavy-Duty recoil springs
-
Heavy-Duty track roller frame
-
Heavy-Duty travel motor covers
-
Grapple/rotator hydraulic arrangement
-
Heavy-Duty swivel guard
-
Forestry Heavy-Duty upper frame with catwalk
-
Heavy-Duty bottom guard
-
Heavy-Duty side doors
-
Right front corner guard with tree deflector
-
Travel alarm and full length shoe support
-
Auxiliary hydraulic pump
325d Fm Log Loader Arrangement For Aem Cab Also Includes:
+ --
AEM cab platform (no cab)
-
High-wide undercarriage
-
High drawbar
-
Heavy-Duty recoil springs
-
Heavy-Duty track roller frame
-
Heavy-Duty travel motor covers
-
Grapple/rotator hydraulic arrangement
-
Heavy-Duty swivel guard
-
Forestry Heavy-Duty upper frame with catwalk
-
Heavy-Duty bottom guard
-
Heavy-Duty side doors
-
Right front corner guard with tree deflector
-
Travel alarm
-
Full length shoe support
-
Counterweight with fuel tank
-
Right front corner fuel tank
-
Auxiliary hydraulic pump
Optional Equipment:
Front Linkage: For General Forestry
+ -Reach Boom 6.2 m (20 ft 2 in)
Reach Stick 3.2 m (10 ft 6 in)
Mass Boom 5.5 m (18 ft 2 in)
Mass Stick 3.2 m (10 ft 6 in)
Bucket Linkage CB2 Family
Front Linkage: For Log Loader
+ -Over/Under Boom/Stick/Heel Linkage 12.8 m (42 ft 0 in)
Under/Under Boom/Stick/Heel Linkage 12.2 m (40 ft 0 in)
Butt-n-Top Boom/Stick Linkage 11.3 m (37 ft 0 in)
Stick Cylinder Guard
Hydraulic Arrangements: For General Forestry
+ -Rotating Grapple
Butt-n-Top Grapple (also available on Log Loader)
Thumb
Auxiliary Hydraulic Lines: For General Forestry
+ -Auxiliary Lines High Pressure (HP) and Medium Pressure (MP), Reach and Mass Boom
Auxiliary Lines High Pressure (HP) and Medium Pressure (MP) Reach and Mass Stick
Engine/power Train
+ -Prefilter, air
Cold Weather Starting Aid
Extended Life Cooling with 50% concentration of protection -34° C (-30º F)
Undercarriage (track Shoes)
+ -700 mm (28 in) Double Grouser Shoes with Trap Holes
850 mm (34 in) Heavy-Duty Triple Grouser Shoes with Trap Holes
General Optional Equipment
+ -Auxiliary Pump Driver (for additional pump) for General Forestry (standard on log loader)
Right Front Corner Fuel Tank (additional 409 L - 108 gal)
Counterweight with Fuel Tank Adds (492 L - 130 gal)
Heavy Counterweight (additional 2960 kg - 4,620 lb). For General Forestry (Standard on Log Loader).
GLL Family Grapples for Log Loader
AEM Cab Installation Kit for Log Loader AEM Cab