View Details

Tap to Call

725C2 Articulated Truck

725C2 Articulated Truck

At a Glance

Engine Model
Cat C9.3
Rated Payload
26.5 ton (US)
Heaped (SAE 2:1)
19.6 yd³
4.53 in
Request a Demo Machine Comparison


The Cat 725C2, with a 15 m3 (19.6 yd3) 24 tonnes (26.5 tons) capacity, offers proven reliability, durability, high productivity, superior operator comfort and lower operating costs. Updating the 725C to include all axle enclosed wet brakes and Automatic Traction Control makes the 725C2 the best option for our customers. Class leading levels of performance and operator comfort make for a productive machine all day long.


+ -
Engine Model Cat C9.3
Bore 4.53in
Stroke 5.87in
Displacement 567in³
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV Cat® C9.3
Net Power - ISO 14396 316HP
No Engine De-rating Below 7500ft
Emissions The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Note (1) The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (3) Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions.
Note (4) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio
Peak Engine Torque Gross (SAE J1995) 1275ft·lbf
Net Power - SAE J1349 314HP
Gross Power - SAE J1995 320HP
Peak Engine Torque Speed 1200r/min
Peak Engine Torque Net (SAE J1349) 1262ft·lbf


+ -
Rated Payload 26.5ton (US)

Body Capacities

+ -
Heaped (SAE 2:1) 19.6yd³
Struck 14.4yd³
Tailgate Heaped SAE 2:1 20.4yd³
Tailgate Struck 14.5yd³


+ -
Forward - 1 5mT/hr
Forward - 2 9mT/hr
Forward - 3 14mT/hr
Forward - 4 21mT/hr
Forward - 5 29mT/hr
Forward - 6 36mT/hr
Reverse - 1 6mT/hr

Service Refill Capacities

+ -
Fuel Tank 108.8gal (US)
Cooling System 21.9gal (US)
Hydraulic System 29.1gal (US)
Engine Crankcase 10gal (US)
Transmission 12.4gal (US)
Final Drives/Differential 33gal (US)
Output Transfer Gear Box 6.3gal (US)
DEF Tank 5.3gal (US)

Sound Levels

+ -
Interior Cab 76dB(A)
Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Body Hoist

+ -
Raise Time 10s
Lower Time 8s


+ -
Brakes ISO 3450 – 2011
Cab - FOPS ISO 3449 Level II – 2005
Cab - ROPS ISO 3471 – 2008
Steering ISO 5010 – 2007

Operating Weights

+ -
Center Axle - Empty 9755lb
Rear Axle - Empty 9205lb
Total - Empty 50795lb
Front Axle - Rated Load 5512lb
Rear Axle - Rated Load 23700lb
Total - Rated Load 52912lb
Center Axle - Loaded 33455lb
Rear Axle - Loaded 32905lb
Total - Loaded 103707lb
Front Axle - Loaded 37374lb
Front Axle - Empty 31835lb
Center Axle - Rated Load 23700lb


+ -
Lock to Lock 4.75 seconds @ 60 rpm

Turning Circle

+ -
Note Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Aisle Width 210in
Turning Dimensions - Clearance Radius 318in
Turning Dimensions - SAE Turning Radius 294in
Turning Dimensions - Steer Angle - Left/Right 45°
Turning Dimensions - Inside Radius 153in

Body Plate

+ -
Type High strength Brinell HB450 wear resistant steel