Menu
View Details

Tap to Call

730 Articulated Truck

730 Articulated Truck

At a Glance

Engine Model
Cat® C13
Rated Payload
31 ton (US)
Heaped (SAE 2:1)
23 yd³
Bore
5.1 in
Request a Demo Machine Comparison

Overview

The Cat 730 with a 17.5 m³ (23 yd³)/28 tonnes (31 tons) capacity, offers demonstrated reliability and durability, high performance and productivity and a new world-class cab to improve operator comfort and ease of operation.<br>Updating the successful 730C2 to include the new cab design makes the 730 a more attractive proposition for our customers. Class leading levels of performance and new features such as Advanced Automatic Traction Control (AATC) and Assisted Hoisting Control create operator comfort, making a productive machine all day long while retaining all axle enclosed wet brakes and Advanced Productivity Electronic Control Strategy (APECS).

Engine

+ -
Engine Model Cat® C13
Bore 5.1in
Stroke 6.2in
Displacement 762.8in³
Net Power - ISO 14396 370HP
Gross Power - SAE J1995 375HP
No Engine De-rating Below 12500ft
Peak Engine Torque Speed 1200r/min
Peak Engine Torque Net (SAE J1349) 1564ft·lbf
Net Power - SAE J1349 367HP
Engine Model - U.S. EPA Tier 4 Final/EU Stage V Cat C13
Peak Engine Torque Gross (SAE J1995) 1579ft·lbf
Note (3) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Emissions The 730 meets Tier 4 Final and Stage V emission standards.
Note (2) The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (1) The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Note (4) Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Note (5) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio

Weights

+ -
Rated Payload 31ton (US)

Body Capacities

+ -
Heaped (SAE 2:1) 23yd³
Struck 17.4yd³
Tailgate Heaped SAE 2:1 24.6yd³
Tailgate Struck 18.2yd³

Transmission

+ -
Forward - 1 5mile/h
Forward - 2 9mile/h
Forward - 3 14mile/h
Forward - 4 21mile/h
Forward - 5 29mile/h
Forward - 6 34mile/h
Reverse - 1 6mile/h

Service Refill Capacities

+ -
Fuel Tank 108.8gal (US)
Cooling System 21.9gal (US)
Hydraulic System 29.1gal (US)
Engine Crankcase 10gal (US)
Transmission 12.4gal (US)
Final Drives/Differential 33gal (US)
Output Transfer Gear Box 6.3gal (US)
DEF Tank 5.3gal (US)

Sound Levels

+ -
Interior Cab 72dB(A)
Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Body Hoist

+ -
Raise Time 12s
Lower Time 8s

Standards

+ -
Brakes ISO 3450 – 2011
Cab - FOPS ISO 3449 Level II – 2005
Cab - ROPS ISO 3471 – 2008
Steering ISO 5010 – 2007

Operating Weights

+ -
Front Axle - Empty 33069lb
Front Axle - Loaded 40300lb
Center Axle - Rated Load 27249lb
Rear Axle - Loaded 36817lb
Center Axle - Loaded 37302lb
Total - Rated Load 61729lb
Front Axle - Rated Load 7231lb
Total - Loaded 114420lb
Center Axle - Empty 10053lb
Rear Axle - Empty 9568lb
Total - Empty 52690lb
Rear Axle - Rated Load 27249lb

Steering

+ -
Lock to Lock 4.75 seconds @ 60 rpm

Body Plate

+ -
Type High strength Brinell HB450 wear resistant steel

Turning Circle

+ -
Turning Dimensions - Aisle Width 210in
Turning Dimensions - Steer Angle - Left/Right 45°
Turning Dimensions - Inside Radius 153in
Turning Dimensions - SAE Turning Radius 294in
Note Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Clearance Radius 318in

Body Plate Thickness

+ -
Base Plate 0.51in
Side Plates 0.43in
Front Plate 0.28in

Optimal Loader/Truck Pass Matching

+ -
Wheel Loaders: 966M/966M XE - Passes 4
Wheel Loader: 962M - Passes 4–5
Wheel Loader: 950M - Passes 5
Hydraulic Excavators: 336F/336F XE - Passes 5–6
Hydraulic Excavators: 349F/349F XE - Passes 4–5
Note An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased
Wheel Loaders: 972M/972M XE - Passes 3–4