Menu
x
View Details

Tap to Call Find a Sales Rep

740 EJ Articulated Truck

740 EJ Articulated Truck

At a Glance

Engine Model
Cat® C18 ACERT™
Rated Payload
42 ton (US)
Heaped (SAE 2:1)
30.1 yd³
Bore
5.7 in
Request a Demo Machine Comparison

Overview

The Cat 740 EJ with a 23 m3 (30.1 yd3) 38 tonnes (42 tons) capacity brings a new level of operator comfort and features to the market in addition to the durability, high productivity and lower operating costs Cat Articulated Trucks are known for.
The all-new operator cabin is a leap into the next generation for Articulated Trucks, providing our operators the best place to help build the future.

Engine

+ -
Engine Model Cat® C18 ACERT™
Bore 5.7in
Stroke 7.2in
Displacement 1106in³
Engine Model - U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014, Korea Tier 4 Final Cat C18 ACERT
Gross Power - SAE J1995 511HP
Net Power - ISO 14396 504HP
Net Power - SAE J1349 496HP
Emissions The 740 EJ meets Tier 4 Final/Stage IV emission standards.
No Engine De-rating Required Below 10000ft
Note (1) The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (3) Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Note (4) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio
Peak Engine Torque Gross (SAE J1995) 1931ft·lbf
Peak Engine Torque Net (SAE J1349) 1887ft·lbf
Peak Engine Torque Speed 1200r/min

Weights

+ -
Rated Payload 42ton (US)

Body Capacities

+ -
Heaped (SAE 2:1) 30.1yd³
Struck 23.5yd³

Transmission

+ -
Forward - 1 3.8mile/h
Forward - 2 5mile/h
Forward - 3 7mile/h
Forward - 4 8.8mile/h
Forward - 5 11.6mile/h
Forward - 6 14.2mile/h
Forward - 7 19.6mile/h
Forward - 8 23.5mile/h
Reverse - 1 4mile/h
Reverse - 2 9.1mile/h
Forward - 9 34mile/h

Service Refill Capacities

+ -
Fuel Tank 145.3gal (US)
Cooling System 23.7gal (US)
Engine Crankcase 13.7gal (US)
DEF Tank 5.3gal (US)
Steering/Hoist Hydraulic System 36.9gal (US)
Transmission - OTG 19.8gal (US)
Axles - Each 15.8gal (US)
Final Drive - Each 1.3gal (US)
Brake Cooling Tank 17.7gal (US)

Sound Levels

+ -
Interior Cab 72dB(A)
Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Standards

+ -
Brakes ISO 3450 – 2011
Cab - FOPS ISO 3449 Level II – 2005
Cab - ROPS ISO 3471 – 2008
Steering ISO 5010 – 2007

Operating Weights

+ -
Front Axle - Empty 44849lb
Center Axle - Empty 17095lb
Rear Axle - Empty 16515lb
Total - Empty 78623lb
Front Axle - Rated Load 3534lb
Center Axle - Rated Load 40120lb
Rear Axle - Rated Load 40120lb
Total - Rated Load 83776lb
Front Axle - Loaded 48548lb
Center Axle - Loaded 57214lb
Rear Axle - Loaded 56637lb
Total - Loaded 162399lb

Steering

+ -
Lock to Lock 4.8 seconds @ 60 rpm

Turning Circle

+ -
Note Dimensions are for machines equipped with 29.5R25 tires.
Turning Dimensions - Aisle Width 233in
Turning Dimensions - Clearance Radius 356in
Turning Dimensions - Inside Radius 173in
Turning Dimensions - SAE Turning Radius 339in
Turning Dimensions - Steer Angle - Left/Right 45 deg

Body Plate

+ -
Front 0.28in
Chute 0.55in
Side 0.43in
Base 0.55in
Type High Strength Brinell HB450 Wear Resistant Steel

Optimal Loader/Truck Pass Matching

+ -
Hydraulic Excavator: 390 - Passes 4
Hydraulic Excavator: 374 - Passes 5
Wheel Loader: 982 - Passes 4
Wheel Loader: 980 - Passes 4-5
Wheel Loader: 972 - Passes 4-5
Note An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.

Blade Eject/Retract

+ -
Eject (automatic) 16s
Eject (manual) 17s
Retract (automatic) 21s
Retract (manual) 21s