415 IL Industrial Loader
At a Glance
|
|
|
|
|
|
|
|
Overview
The Cat® 415 IL Industrial Loader delivers great performance, improved fuel efficiency, and a superior hydraulic system.
Engine
+ -| Net Power - SAE J1349 | 69HP |
| Engine Model | Cat C3.6 |
| Bore | 3.86in |
| Stroke | 4.72in |
| Displacement | 220in³ |
| Net Peak Power - 2,200 rpm - ISO 9249 | 69HP |
| Net Peak Power - 2,200 rpm - SAE J1349 | 69HP |
| Gross Power - SAE J1995 | 75HP |
| Gross Power - ISO 14396 | 74HP |
| Net Torque Rise - 1,200 rpm | 86% |
| Net Power - 2,200 rpm - SAE J1349 | 69HP |
| Rated Net Power - 2,200 rpm - ISO 9249 | 69HP |
| Emissions | Engine meets U.S. EPA Tier 4 Final emission standards. |
| Net Peak Torque SAE J1349 | 308ft·lbf |
| Note | No derating required up to 2286 m (7,500 ft). |
Weights
+ -| Operating Weight - Maximum | 17637lb |
| Cab - ROPS/FOPS | 359lb |
| Air Conditioning | 101lb |
| MP Bucket (0.96 m3/1.25 yd3) - With Fold-Over Forks | 2017lb |
| MP Bucket (0.96 m3/1.25 yd3) - Without Fold-Over Forks | 1642lb |
| Operating Weight - Maximum - ROPS Capacity | 17637lb |
| Front Counterweight - Counterweights - Option 1 | 255lb |
| Front Counterweight - Counterweights - Option 2 | 530lb |
| Front Counterweight - Counterweights - Option 3 | 1015lb |
| Rear Counterweight | 198lb |
| Note | *Specifications shown are for machine equipped with 0.76 m³ (1.0 yd³) general purpose loader bucket, 115 kg (255 lb) front counterweight, 80 kg (176 lb) operator, all wheel drive and full fuel tank. |
| Minimum Operating Weight | 14035lb |
Hydraulic System
+ -| Pump Type | Variable Flow, Axial Piston |
| Type | Closed Center |
| System Pressure - Loader | 2973psi |
| System Pressure - Hitch/Box Scraper | 2973psi |
| Pump Capacity at 2,200 rpm | 33gal/min |
Service Refill Capacities
+ -| Hydraulic System | 23.8gal (US) |
| Rear Axle | 4.4gal (US) |
| Cooling System with Air Conditioning | 4.4gal (US) |
| Fuel Tank | 42gal (US) |
| Front Axle (4WD) - Planetaries | 0.2gal (US) |
| Engine Oil - With Filter | 2.3gal (US) |
| Front Axle (4WD) | 2.9gal (US) |
| Rear Axle - Planetaries | 0.4gal (US) |
| Transmission - Power Shuttle - 2WD | 4gal (US) |
| Transmission - Power Shuttle - 4WD | 4gal (US) |
| Hydraulic Tank | 10.6gal (US) |
| Note | Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur |
Steering
+ -| Bore | 2.6in |
| Stroke | 4.2in |
| Rod Diameter | 1.6in |
| Power Steering | Hydrostatic |
| Type | Front Wheel |
| Axle Oscillation | 11° |
| Turning Circle - AWD (inner wheel not braked) - Outside, Front Wheels | 26.8ft |
| Turning Circle - AWD (inner wheel not braked) - Outside, Widest Loading Bucket | 36ft |
Axle Ratings
+ -| Rear Axle - Dynamic | 20233lb |
| Front Axle (4WD) - Static | 26455lb |
| Front Axle (4WD) - Dynamic | 13228lb |
| Rear Axle - Static | 50582lb |
Counterweights - Front - Minimum Recommendations
+ -| Standard Stick - MP Loader Bucket - 4WD | no counterweight |
| Standard Stick - GP Loader Bucket - 4WD | 255lb |
Tires
+ -| Standard Configuration of Front/Rear Tires | Front: 12.5 80/16.9; Rear: 16.9-24 |
Transmission
+ -| Power Shuttle Transmission - Standard - Reverse - 2nd | 5.5mile/h |
| Power Shuttle Transmission - Standard - Forward - 3rd | 13mile/h |
| Power Shuttle Transmission - Standard - Reverse - 3rd | 13mile/h |
| Power Shuttle Transmission - Standard - Reverse - 4th | 23mile/h |
| Power Shuttle Transmission - Standard - Forward - 4th | 23mile/h |
| Power Shuttle Transmission - Standard - Forward - 2nd | 5.5mile/h |
| Power Shuttle Transmission - Standard - Forward - 1st | 3.4mile/h |
| Power Shuttle Transmission - Standard - Reverse - 1st | 3.4mile/h |
Standard Equipment:
Standard Equipment
+ --
Air cleaner
-
Alarm, back-up
-
Audible system fault alarm
-
Box Blade Controls, finger lever pilot
-
Battery, maintenance-free, 880 CCA
-
Battery disconnect switch
-
Brace, lift cylinder
-
Brake, secondary parking
-
Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
-
Bucket level indicator
-
Canopy, ROPS/FOPS
-
Coat restraint
-
Coolant/antifreeze, extended life
-
Counterweight, bumper
-
Dome light (cab only)
-
Diagnostic port for engine
-
Differential lock, floor mounted
-
Differential lock, loader joystick
-
Drink holders, two
-
Engine, Cat C3.6, meets Tier 4 Final emission standards, diesel particulate filter
-
Engine enclosure, sound suppression removal panels
-
Face seals, O-ring
-
Fan, suction and guard
-
Fast reversing shuttle, all gears
-
Fenders, rear
-
Filters, spin-on: fuel, engine oil, transmission oil, water separator
-
Filters, bowl and cartridge: hydraulic fluid
-
Flashing hazards/signal lights
-
Floor mat
-
Fuel tank, fully enclosed
-
Fully hinged front grill for cooling package cleaning access
-
Gauge cluster: coolant temperature, fuel level, torque converter temperature, battery voltage
-
Ground level fuel fill
-
High ambient cooling package
-
Hitch, rear 3-point
-
Hood lock, inside cab
-
Hydraulic hose, Cat XT™-3
-
Hydraulic oil cooler
-
Hydraulic oil level sight gauge
-
Hydraulic valve, hydrostatic steering
-
Hydraulic valves, loader 3 function
-
Hydraulic valves, rear 5 function
-
Hydraulics, load sensing with variable displacement piston pump
-
Indicator lights and LCD warnings for system status
-
Instrument panel lights
-
Key start/stop system
-
LCD screen with machine system information
-
Lights, working (2 front, 2 rear)
-
Loader, self-leveling, return-to-dig and transmission disconnect switch
-
Loader, single tilt
-
Mirror, rearview
-
Open circuit breather
-
Power receptacle, 12 volt, 2 internal, 2 external roof mounted
-
Power steering, hydrostatic
-
Seat belt, retractable, 75 mm (3 in)
-
Steering knob
-
Seat, mechanical suspension, fabric or vinyl cover, with armrest
-
Starting system, glow plugs
-
Steering, hydrostatic
-
Storage compartment, lockable
-
Storage tray
-
Stop and tail lights
-
Tires, 12.5/80-18 front, 16.9-24 rear
-
Toolbox, external, lockable
-
Torque converter
-
Throttle, foot, electronic
-
Transmission, four speed, syncromesh
-
Transmission neutralizer switch
-
Transport tie-downs
-
Four Wheel Drive
-
Warning horn, electric
-
Product Link™, cellular, PLE643
-
Product Link, dual mode, PLE683
Optional Equipment:
Optional Equipment
+ -Battery, additional, 880 CCA
Box, blade/scarifier
Cab, standard with air conditioning
Cold weather fuel (–30° C/–22° F)
Cold weather package, including additional battery, engine block heater, radiator antifreeze (–50° C/–58° F), cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
Counterweight, rear 90 kg (198 lb)
Dual tilt rear hitch
Face fan
Fenders, front with integral steps
Radio and CD player, Bluetooth®
Ride Control
Rotating beacon, magnetic mount
Security system keypad
Vandalism protection, gauge cover
Work Tool Attachments such as buckets, forks, and material handling arms. See your Cat dealer for more information.
LED lights, working (2 front, 2 rear)
Security system, Bluetooth
Security System, operator display
Side mirrors, cab, external
Single Tilt Loader Coupler, Integrated Tool Carrier (IT) Interface
1.14 m3 (1.5 yd3) Pin On Multi-Purpose Bucket
1.14 m3 (1.5 yd3) Pin On Multi-Purpose Bucket
1.1 m3 (1.4 yd3) IT Coupler Multi-Purpose Bucket
1.1 m3 (1.4 yd3) Pin On Multi-Purpose Bucket With Bolt-On Teeth
1.1 m3 (1.4 yd3) Pin On Multi-Purpose Bucket With Bolt-On Teeth
1.1 m3 (1.4 yd3) Pin On Multi-Purpose Bucket With Bolt-On Cutting Edge
1.1 m3 (1.4 yd3) Pin On Multi-Purpose Bucket With Bolt-On Cutting Edge
1.1 m3 (1.4 yd3) Pin On Multi-Purpose Bucket
1.1 m3 (1.4 yd3) Pin On Multi-Purpose Bucket
1.0 m3 (1.3 yd3) IT Coupler Multi-Purpose Bucket
1.03 m3 (1.35 yd3) Pin On Multi-Purpose Bucket With Bolt-On Teeth
1.03 m3 (1.35 yd3) Pin On Multi-Purpose Bucket With Bolt-On Teeth
1.03 m3 (1.35 yd3) Pin On Multi-Purpose Bucket With Bolt-On Cutting Edge
1.03 m3 (1.35 yd3) Pin On Multi-Purpose Bucket With Bolt-On Cutting Edge
1.03 m3 (1.35 yd3) Pin On Multi-Purpose Bucket
1.34 m3 (1.75 yd3) Pin On General Purpose Bucket
1.03 m3 (1.35 yd3) Pin On Multi-Purpose Bucket
1.14 m3 (1.5 yd3) IT Coupler General Purpose Bucket
1.15 m3 (1.5 yd3) Pin On General Purpose Bucket With Bolt-On Teeth
1.15 m3 (1.5 yd3) Pin On General Purpose Bucket With Bolt-On Cutting Edge
1.15 m3 (1.5 yd3) Pin On General Purpose Bucket
1.1 m3 (1.4 yd3) Pin On General Purpose Bucket With Bolt-On Teeth
1.1 m3 (1.4 yd3) Pin On General Purpose Bucket With Bolt-On Cutting Edge
1.1 m3 (1.4 yd3) Pin On General Purpose Bucket
1.0 m3 (1.31 yd3) IT Coupler General Purpose Bucket
1.0 m3 (1.3 yd3) Pin On General Purpose Bucket With Bolt-On Cutting Edge
1.0 m3 (1.3 yd3) Pin On General Purpose Bucket
1.0 m3 (1.3 yd3) Pin On General Purpose Bucket With Bolt-On Teeth
1.0 m3 (1.3 yd3) Pin On General Purpose Bucket With Bolt-On Cutting Edge
1.0 m3 (1.3 yd3) Pin On General Purpose Bucket
0.76 m3 (1.0 yd3) Pin On General Purpose Bucket With Bolt-On Cutting Edge
