PM822 Cold Planer
360° Interior View
At a Glance
|
|
|
|
Overview
The PM822 is a high-production, half-lane milling machine with a cutting width of 2235 mm (88 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.
Cutting System
+ -Milling Width | 88in |
Maximum Milling Depth | 13in |
Rotor Speeds | 100 / 109 / 118 rpm |
Number of Bits | 193 |
Power Train
+ -Rated Power | 806hp |
Engine | Cat C18 twin-turbo |
Maximum Travel Speed | 3.7mile/h |
Maximum Milling Speed | 328ft/min |
Weights
+ -Operating Weight | 80910lb |
Transport Weight | 72312lb |
Dimensions
+ -Operating Length - Conveyor Up | 47.64ft |
Operating Width | 10.2ft |
Height - Canopy | 13.29ft |
Maximum Truck Clearance | 15.94ft |
Minimum Right Cutting Radius | 5.91ft |
Minimum Left Cutting Radius | 6.56ft |
Conveyor Swing | 60 degrees from center |
Transport Length | 40.78ft |
Transport Width | 8.99ft |
Transport Height | 9.84ft |
Service Refill Capacities
+ -Water Spray System Tank | 898.2gal (US) |
Cooling System | 27.5gal (US) |
Engine Oil | 17.2gal (US) |
Fuel Tank | 292.7gal (US) |
Hydraulic Tank | 29.9gal (US) |
Standard Equipment:
Operator Environment
+ --
Ground control keypads
-
Single high-resolution LCD touchscreen display
-
12-volt power receptacle
Cat Connect Technology
+ --
Cat Product Link
-
Cat GRADE
Conveyor
+ --
Grease tensioner
-
Material removal boost feature
Rotor System
+ --
Automatic plunge-cut
-
Automatic transition feature
-
Obstacle jump
-
Three cutting speeds
Powertrain
+ --
Auto engine idle control
-
High capacity cooling system
-
Dual propel pumps
-
Automatic load control
Hydraulic System
+ --
Dual pump hydraulic propel system
-
Traction control
Service And Maintenance
+ --
Sampling ports for Scheduled Oil Sampling (S·O·S℠)
-
Power hood
-
Platform-level engine oil dipsticks
-
Rotor chamber water spray system
-
Air compressor
-
Accessory drive system
-
3400 L (898 gal) onboard water tank
-
Side water fill valve
Safety And Security
+ --
Platform handrails
-
Signaling/warning horn
-
Wide-dispersion LED work lights
Optional Equipment:
Operator Environment
+ -Dual high-resolution LCD touchscreen displays
Hydraulically folding canopy with LEDs
Air-ride suspension seats
Windscreens
Cat Connect Technology
+ -Inboard ski
Sonic sensor (averaging or string line)
Ground level grade controls and displays
Conveyor
+ -Dust abatement system
Remote camera (loading conveyor)
Rotor System
+ -System K Rotor - Course (25 mm)
System K Rotor - Course (18 mm)
System K Rotor - Standard (15 mm)
System K Rotor - Fine (8 mm)
System K Rotor - Micro (6 mm)
System H Rotor - Micro (6x2 mm)
Diamond bits
Bit bucket trays
Pneumatic bit removal tool
Tool holder extractor
Rotor turning device with pendant control
Powertrain
+ -CE certificate
Hydraulic System
+ -Water tank transfer pump
Fuel transfer pump
Service And Maintenance
+ -High pressure washdown
Low pressure washdown
Additional spray bars
Safety And Security
+ -Perimeter LED strip lights
Magnetic LED work light
Warning beacon (fixed or magnetic mount)
Truck signal lights
Remote camera (rear, front, magnetic mount)