816F Series 2 Landfill Compactor
At a Glance
|
Operating Weight
52364 lb
|
|
Gross Power
253 HP
|
|
Net Power
232 HP
|
|
Engine Model
Cat® C9 ACERT™
|
Request a Demo
Overview
One World, One Machine. The Cat® 816F Series 2 Landfill Compactor offers…Exceptional trash protection, Greater productivity, Excellent machine stability and operator comfort, while meeting worldwide U.S. Environmental Protection Agency Tier 3 emissions regulations and Stage IIIA EU Emissions Directive 97/68/EC. Combine all this with the finest customer support system in the world through the Caterpillar dealer network and you get the lowest operating costs with the best up-time in the industry.
Engine
+
-
| Gross Power |
253HP |
| Net Power |
232HP |
| Engine Model |
Cat® C9 ACERT™ |
| Net Power ISO 3046-2 |
232HP |
| Net Power - ISO 9249 |
235HP |
| SAE J1349 |
232HP |
| EEC 80/1269 |
235HP |
| Torque Rise |
19% |
| Bore |
4.4in |
| Stroke |
5.9in |
| Displacement |
537in³ |
Transmission
+
-
| Forward - 1 |
3.5mile/h |
| Forward - 2 |
5.9mile/h |
| Reverse - 1 |
4mile/h |
| Reverse - 2 |
6.6mile/h |
Hydraulic System
+
-
| Vane Pump Output at 2015 rpm and 6900 kPa (1000 psi) |
29.6gal/min |
| Relief Valve Setting |
2248psi |
| Lift Cylinder Bore x Stroke |
120.65 mm x 913.9 mm 4.75 in x 36 in |
Axles
+
-
| Front |
Fixed |
| Oscillating Rear |
±8° |
Brakes
+
-
| Standards |
Meet OSHA regulations |
Straight Blade
+
-
| Width - Over End Bits |
11.9ft |
| Moldboard - Length |
11.67ft |
| Height |
6.27ft |
Service Refill Capacities
+
-
| Fuel Tank |
117.8gal (US) |
| Cooling System |
14.5gal (US) |
| Crankcase |
9gal (US) |
| Transmission |
13.2gal (US) |
| Differential - Final Drives - Front |
11.4gal (US) |
| Differential - Final Drives - Rear |
11.4gal (US) |
| Hydraulic System - Including Tank |
36.2gal (US) |
| Hydraulic Tank |
23.2gal (US) |
Cab
+
-
| ROPS/FOPS |
Meet SAE and ISO standards |
Sound Performance
+
-
| Standards |
Meet required sound standards |
Operating Specifications
+
-
Dimensions (Approximate)
+
-
| Height - Top of Cab with A/C |
12.75ft |
| Height - Top of Exhaust Pipe |
11.36ft |
| Height - Top of Hood |
8.16ft |
| Ground Clearance - Bumper |
2.64ft |
| Ground Clearance - Striker Bars |
2.13ft |
| Centerline of Rear Axle to Edge of Bumper |
6.22ft |
| Centerline of Rear Axle to Hitch |
5.5ft |
| Wheel Base |
10.9ft |
| Length - With Blade on Ground |
25.76ft |
| Width - Over Wheels |
10.95ft |
| Width - Over End Bits - Blade |
11.99ft |
| Turning Radius - Outside End Bits |
21.21ft |
| Blade Width - Straight |
11.67ft |
| Drum Width |
3.33ft |
| Ground Clearance |
1.49ft |
Wheels - Plus Tip Teeth with Abrasion Resistant Material (ARM)
+
-
| Drum Width |
3.33ft |
| Drum Diameter |
4.25ft |
| Tips per Wheel |
20 |
Wheels - Chevron-Pattern, Chopper Blades
+
-
| Drum Width |
3.33ft |
| Drum Diameter |
4.25ft |
| Blades per Wheel |
20 |
Standard Equipment:
Electrical
+
-
-
Alarm, backup
-
Alternator (80 amp)
-
Batteries, maintenance-free (2)
-
Diagnostic connectors
-
Lighting system, halogen (front, rear and cab-mounted)
-
Starting and charging system (24-volt)
-
Starting receptacle for emergency starts
Guards
+
-
-
Axle (front and rear)
-
Drive shaft
-
Hinged crankcase
-
Hydraulic tank
-
Power train
-
Steering cylinder
Operator Environment
+
-
-
Air conditioner, roof-mounted
-
Blade control system locks
-
Cab, pressurized and sound suppressed (ROPS/FOPS)
-
Coat hook
-
Cigar lighter and ashtray
-
Caterpillar Monitoring System
-
Dome light (cab)
-
Fuses, blade style (in-cab)
-
Heater and defroster
-
Horn, electric (steering wheel mounted)
-
Hydraulic steering
-
Lunchbox and beverage holders
-
Mirrors, rearview (internally-mounted)
-
Seat, KAB mechanical suspension
-
Seat belt, retractable, 76 mm (3 in) wide
-
Wet-arm wipers/washers (front and rear)
Power Train
+
-
-
Brakes, fully hydraulic, enclosed, wet-disc
-
Engine, Cat® C9 ACERT™
-
Engine cooling fan (suction)
-
Fuel priming pump (electric)
-
Muffler
-
Radiator, Next Generation Modular (NGMR)
-
Starting aid (ether)
-
Torque converter
-
Transmission, planetary (2 forward/2 reverse speeds)
Other Standard Equipment
+
-
-
Cat O-ring face seals/couplings
-
XT™ hoses
-
Coolers
-
Hitch, drawbar with pin
-
Hood, metallic with lockable service doors
-
Hydraulic oil cooler
-
Oil sampling valves
-
Striker bars (all wheels)
-
Vandalism protection caplocks
-
Wheels (1016 mm/40 in) with weld-on Plus Tips with extended inner rim
Bulldozer
+
-
-
Bulldozer blade, hydraulics and linkage are not included in standard equipment
Antifreeze
+
-
-
Premixed 50 percent concentration of Extended Life Coolant with freeze protection to -34° C (-29° F)
Optional Equipment:
