Menu
View Details

Tap to Call

D11T/D11T CD Dozer

Home | New Machines | D11T/D11T CD Dozer

D11T/D11T CD Dozer

At a Glance

Engine Model
Cat® C32
Flywheel Power
850 HP
Operating Weight
229800 lb
Shipping Weight
82640 lb
Request a Demo Machine Comparison
Share Download Brochure
Specifications Equipment Related Products

Overview

Cat® large dozers are designed with durability built in, ensuring maximum availability through multiple life cycles. By optimizing performance and simplifying serviceability with our modular design, our machines move more material efficiently and safely at a lower cost per ton. These models include safety enhancements, improved operator comfort, and productivity increasing electronic features to keep your business strong for generations to come.

Engine

+ -
Engine Model Cat® C32
Flywheel Power 850HP
Bore 5.7in
Stroke 6.4in
Displacement 1959in³
Emissions U.S. EPA Tier 4 Final
Engine Power - Gross SAE J1995* 913HP
Engine Power - Net SAE J1349/ISO 9249 850HP
Net SAE J1349/ISO 9249 850HP
Note (1) * Excludes all fan losses.
Note (2) Engine ratings apply at 1,800 rpm.
Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Note (4) No derating required up to 3658 m (12,000 ft) altitude. High altitude attachment available for greater than 3658 m (12,000 ft).
Engine Power - ISO 14396 908HP

Weights

+ -
Operating Weight 229800lb
Shipping Weight 82640lb
Operating Weight - CD 248500lb
Shipping Weight - CD 83340lb
Note (1) D11T Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
Note (2) D11T Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames.
Note (3) D11T CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, single-shank ripper, and operator.
Note (4) D11T CD Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames.

Undercarriage

+ -
Shoe Type Extreme Service
Width - Shoe 28in
Shoes/Side 41
Grouser Height 4in
Pitch 12.5in
Track Gauge 114in
Length - Track on Ground 175in
Ground Contact Area 9781in²
Track Rollers/Side 8
Number of Carrier Rollers 1 per side (optional)
Width - Shoe - CD 36in
Ground Contact Area - CD 12605in²
Ground Clearance* 30.6in
Note (1) * Includes grouser height for total dimensions on hard surface.
Note (2) Sleeve Bearing Track with Positive Pin Retention.

Transmission

+ -
1 Forward 2.4mile/h
2 Forward 4.2mile/h
3 Forward 7.3mile/h
1 Reverse 2.9mile/h
2 Reverse 5.1mile/h
3 Reverse 8.7mile/h
Type Planetary powershift
Transmission Clutch Diameter 21in

Service Refill Capacities

+ -
Fuel Tank 425gal (US)
Cooling System 71.1gal (US)
Engine Crankcase* 27.2gal (US)
Power Train 90.9gal (US)
Final Drive - Each 12.4gal (US)
Roller Frames - Each 24.8gal (US)
Pivot Shaft Compartment 18.8gal (US)
Implement Hydraulic System - Tank Only 58.9gal (US)
Fuel Tank - High Capacity 505gal (US)
Fuel Tank - Platform Ready 470gal (US)
Note * With oil filters.

Hydraulic Controls

+ -
D11T CD - Carrydozer Relief Valve Setting 3500psi
D11T - Bulldozer Relief Valve Setting 3300psi
D11T - Combined Pump Output - Implement 164gal/min
D11T - Pump Type Gear-type pump
D11T - Ripper (Lift) Relief Valve Setting 3300psi
D11T - Ripper (Pitch) Relief Valve Setting 3300psi
D11T - Tilt Cylinder Relief Valve Setting 3525psi
D11T - Tilt Pump Flow 41gal/min
D11T CD - Pump Output - Implement 177gal/min
D11T CD - Pump Type Gear-type pump
D11T CD - Ripper (Lift) Relief Valve Setting 3500psi
D11T CD - Ripper (Pitch) Relief Valve Setting 3500psi
D11T CD - Tilt Cylinder Flow 66gal/min
D11T CD - Tilt Cylinder Relief Valve Setting 3600psi
Note (1) Pump output measured at 1,800 engine rpm and 6895 kPa (1,000 psi).
Note (2) Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Note (3) Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers.

Steering and Brakes

+ -
Hydraulically Applied Multiple-disc Steering Clutch 17.3in
Spring Applied Multiple-disc Brake 24.1in

Dimensions (Approximate) - D11T

+ -
Ground Clearance* 31.4in
Track Gauge 114in
Width - Without Trunnions - Standard Shoe 148.9in
Width - Over Trunnions 172.4in
Height - FOPS Cab* 173.4in
Height - Top of Stack* 179.1in
Height - ROPS/Canopy* 185.9in
Drawbar Height (Center of Clevis)* 37.1in
Length - Track on Ground 175in
Overall Length - Basic Tractor 242.5in
Length - Basic Tractor - With Drawbar 242.5in
Length - With SU-Blade 337.8in
Length - With U-Blade 340.2in
Length - With Single-Shank Ripper 319.2in
Length - With Multi-Shank Ripper 331.8in
Overall Length - SU-Blade/SS Ripper 414.4in
Note (1) *Includes grouser height for total dimensions on hard surfaces.
Note (2) D11T shown equipped with 710 mm (28 in) shoes.

Dimensions (Approximate) - D11T CD

+ -
Ground Clearance* 31.4in
Track Gauge 114in
Width - Without Trunnions - Standard Shoe 149.8in
Width - Over Trunnions 172.4in
Height - FOPS Cab* 173.4in
Height - Top of Stack* 179.1in
Height - ROPS/Canopy* 185.9in
Drawbar Height (Center of Clevis)* 37.1in
Length - Track on Ground 175in
Overall Length - Basic Tractor 242.5in
Length - Basic Tractor - With Drawbar 242.5in
Length - With SU-Blade** 345.1in
Length - With Single-Shank Ripper 319.2in
Length - With Multi-Shank Ripper 331.8in
Overall Length - SU-Blade/SS Ripper** 421.7in
Note (1) *Includes grouser height for total dimensions on hard surfaces.
Note (2) **CD Blade on D11T CD.
Note (3) D11T shown equipped with 710 mm (28 in) shoes.

Standards

+ -
FOPS Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
ROPS Rollover Protective Structure (ROPS) meets the following criteria: SAE J1040 MAY94, ISO 3471:1994.
Sound (1) The operator Equivalent Sound Pressure Level (Leq) is 79 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. This is a dynamic cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with th
Sound (2) The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 87 dB(A).

Track Roller Frame

+ -
Oscillation 13.8in