D5K2 Track-Type Tractor
At a Glance
|
|
|
|
Overview
Experience the best finish grading tractors in the industry. The Cat® D3K2, D4K2 and D5K2 Track-Type Tractors deliver superior performance and comfort with lower operating costs.
Engine
+ -Engine Model | Cat C4.4 |
Power - Net | 104HP |
Displacement | 269in³ |
Bore | 4.13in |
Stroke | 5in |
Net Power - 2,200 rpm - SAE J1349 | 104HP |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | 104HP |
Note | Engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards. |
Weights
+ -Operating Weight - XL | 20313lb |
Operating Weight - LGP | 20992lb |
Operating Weight - LGP, 762 mm/30 in | 21442lb |
Note | Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank. |
Transmission
+ -Drive Pumps | 1 |
Track Motors | 2 |
Relief Valve Settings | 7033psi |
Maximum Travel Speed - Forward | 5.6mile/h |
Maximum Travel Speed - Reverse | 6.2mile/h |
Hydraulic Controls
+ -Pump Output | 17.7gal/min |
Relief Valve Settings | 2988psi |
Winch
+ -Weight | 1345lb |
Winch Drive | Hydrostatic |
Control | Hydraulic |
Speed | Variable |
Winch Length | 27.76in |
Overall Width | 29.2in |
Drum Diameter | 10in |
Drum Width | 10.8in |
Throat Clearance | 6.75in |
Rope Diameter - Recommended | 0.63in |
Rope Diameter - Optional | 0.75in |
Drum Capacity - Recommended Cable | 371ft |
Drum Capacity - Optional Cable | 256ft |
Maximum Line Pull - Bare Drum | 40000lb |
Maximum Line Pull - Full Drum | 25000lb |
Maximum Line Speed - Bare Drum | 131ft/min |
Maximum Line Speed - Full Drum | 207ft/min |
Ripper
+ -Type | Parallelogram |
Number of Shanks | 3 |
Height | 6.5in |
Weight | 1222lb |
Maximum Digging Depth | 13.3in |
Maximum Reach - Ground Line | 21.9in |
Maximum Ground Clearance Under Tip | 17.6in |
Overall Width | 67.3in |
Service Refill Capacities
+ -Crankcase - With Filter | 2.91gal (US) |
Final Drive - Each - XL | 2.6gal (US) |
Final Drive - Each - LGP | 2.6gal (US) |
Transmission - Hydraulic Tank | 15.7gal (US) |
Diesel Exhaust Fluid (DEF) Tank | 4.9gal (US) |
Cooling System | 5.92gal (US) |
Fuel Tank | 51.5gal (US) |
Undercarriage
+ -Shoe Width - XL | 20in |
Shoe Width - LGP | 26in |
Length - Track on Ground - XL | 91in |
Length - Track on Ground - LGP | 91in |
Track Gauge - XL | 63in |
Track Gauge - LGP | 69in |
Ground Contact Area - XL | 3652in² |
Ground Contact Area - LGP | 4726in² |
Ground Pressure - XL | 5.6psi |
Ground Pressure - LGP | 4.5psi |
Ground Contact Area - LGP, 762 mm (30 in) | 5514in² |
Ground Pressure - LGP, 762 mm (30 in) | 3.93psi |
Shoe Width - LGP, 762 mm (30 in) | 30in |
Track Gauge - LGP, 762 mm (30 in) | 73.2in |
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 40 |
Number of Shoes - Each Side - SystemOne Undercarriage | 36 |
Length - Track on Ground - LGP, 762 mm (30 in) | 91in |
Number of Rollers - Each Side | 7 |
Cab
+ -Sound Levels - ISO 6396:2008 | 79dB(A) |
Sound Levels - SAE J1166 FEB2008 | 79dB(A) |
FOPS | ISO 3449:2005 Level II |
ROPS | ISO 6396:2008 |
Dimensions
+ -Track Gauge - XL | 63in |
Track Gauge - LGP | 68.9in |
Track Gauge - LGP, 770 mm (30 in) | 73.2in |
Width - Tractor - Standard Shoes - No Blade - XL | 83.1in |
Width - Tractor - Standard Shoes - No Blade - LGP | 94.9in |
Width - Tractor - Standard Shoes - No Blade - LGP (770 mm/30 in) | 103.5in |
Overall Length - With Blade - XL | 170.1in |
Overall Length - With Blade - LGP | 169.1in |
Overall Length - With Blade - LGP, 770 mm (30 in) Shoes | 169.1in |
Length - Basic Tractor - Without Blade - XL | 128.5in |
Length - Basic Tractor - Without Blade - LGP | 128.5in |
Length - Basic Tractor - Without Blade - LGP, 770 mm (30 in) Shoes | 128.5in |
Tractor Height - XL | 109in |
Tractor Height - LGP | 109in |
Tractor Height - LGP, 770 mm (30 in) | 109in |
Ground Clearance - XL | 13in |
Ground Clearance - LGP | 13in |
Ground Clearance - LGP, 770 mm (30 in) Shoes | 13in |
BLADE: Blade Width - XL | 109.5in |
BLADE: Blade Width - Intermediate | 115in |
BLADE: Blade Width - LGP | 126.7in |
BLADE: Blade Height - XL | 42.2in |
BLADE: Blade Height - Intermediate | 39.8in |
BLADE: Blade Height - LGP | 39.8in |
BLADE: Blade Lift Height - XL | 30.2in |
BLADE: Blade Lift Height - Intermediate | 30.2in |
BLADE: Blade Lift Height - LGP | 30.2in |
BLADE: Digging Depth - XL | 23.1in |
BLADE: Digging Depth - Intermediate | 22.5in |
BLADE: Digging Depth - LGP | 22.5in |
BLADE: Blade Cutting Edge Angle, Adjustable - XL | 52° to 58° |
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate | 52° to 58° |
BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
BLADE: Maximum Tilt - XL | 15.8in |
BLADE: Maximum Tilt - Intermediate | 17.6in |
BLADE: Maximum Tilt - LGP | 17.6in |
BLADE: Maximum Angle (either side) - XL | 25° |
BLADE: Maximum Angle (either side) - Intermediate | 25° |
BLADE: Maximum Angle (either side) - LGP | 25° |
BLADE: Blade Width at Maximum Angle - XL | 103.8in |
BLADE: Blade Width at Maximum Angle - Intermediate | 105.1in |
BLADE: Blade Width at Maximum Angle - LGP | 115.8in |
BLADE: Blade Capacity (SAE) - XL | 2.86yd³ |
BLADE: Blade Capacity (SAE) - Intermediate | 2.73yd³ |
BLADE: Blade Capacity (SAE) - LGP | 3.06yd³ |
Standard Equipment:
Electrical
+ --
Alternator, 12 volt, 120 Amp, heavy duty brushless
-
Alarm, backup
-
Batteries (2), heavy duty, maintenance free, 2,000 CCA
-
Diagnostic connector
-
Horn, electric
-
Lights, halogen, 2 front and 2 rear
-
Starter, electric, 12 volt
Operator Station
+ --
ROPS/FOPS canopy
-
Seat, air suspended, cloth or vinyl
-
Seatbelt, retractable 76 mm (3 in)
-
Foot pads, dash
-
Electronic Monitoring System with: – Gauges for engine coolant temperature, hydraulic oil temperature and fuel level – Travel speed limiter, electronic – Engine RPM and gear display – Hour meter, electric – Engine air cleaner service indicator, electronic – Water-in-fuel indicator, electronic
-
Slope Indicate
-
Throttle switch, rotary
-
Eco mode
-
Controls, seat mounted, fore/aft adjustment
-
Armrests, adjustable
-
Mirror, rearview, inside
-
Single pedal combining deceleration and braking functions
-
Independent forward/reverse speed settings
-
Power port, 12 volt
-
Coat hook
-
Storage compartment
-
Cup holder
-
Floor mat, rubber, heavy duty
Hydraulics
+ --
Hydraulics, 3 valve
-
Load sensing hydraulics
-
Single lever, three function control
-
Hydraulic pump and oil
-
Stable blade control
Power Train
+ --
Cat C4.4 diesel engine, turbocharged, U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) certified with aftertreatment
-
Aftercooler, Air-to-Air (ATAAC)
-
Aluminum bar plate cooling system (radiator, power train)
-
Air cleaner with precleaner, automatic dust ejection and under-hood intake
-
Dual path, closed-loop hydrostatic transmission
-
Electric fuel priming pump
-
Fuel/water separator
-
Automatic Traction Control
Undercarriage
+ --
SALT Undercarriage
-
7 roller track frame
-
Track rollers, lifetime lubricated
-
Carrier rollers
-
Track adjusters, hydraulic
-
Guards, front/rear guiding
-
Master link
Other Standard Equipment
+ --
Cat Product Link™ PL631 Satellite/PL641 Cellular
-
C-Frame, VPAT, hydraulic cylinders and lines
-
Lockable engine enclosures
-
Front pull device
-
Rigid drawbar
-
Ecology drains (engine, power train and implement oil and engine coolant)
-
Scheduled oil sampling ports (engine, power train implement oil)
-
Vandalism protection
-
Heavy duty crankcase guard
Antifreeze
+ --
Extended life coolant, –37° C (–35° F)
Optional Equipment:
Electrical
+ -Integrated four front halogen lights, two rear halogen lights
Power Train
+ -Drive, auxiliary
Installation, winch
Undercarriage
+ -Track Pairs, XL: – Track, 510 mm (20 in) MS SystemOne
Track Pairs, LGP: – Track, 660 mm (26 in) MS SystemOne – Track, 762 mm (30 in) MS SystemOne
Operator Station
+ -Cab with air conditioning*
Cab, polycarbonate windows and air conditioning*
Seat, air suspension, choice of: – Vinyl, heated seat with heated controls – Cloth, heated seat with heated controls – Cloth, heated and ventilated seat with heated controls
Radio, AM/FM, Bluetooth
Sound suppression
*Air Conditioning System: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg) of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Hydraulics
+ -Hydraulics, 4 valve for use with ripper
Hydraulics, 4 valve for use with winch
Guards
+ -Guard, rear, heavy duty
Grill, radiator, heavy duty
Guard, track guiding, center
Guard, track roller, full length
Screen, rear, cab
Screen, side, cab
Screen, rear, canopy
Screen, front and doors, canopy
Sweeps, front
Sweeps, rear
Blades
+ -VPAT XL blade
VPAT LGP blade
VPAT Intermediate blade
Rear Attachments
+ -Drawbar, towing
Mounting, winch
Ripper, parallelogram, includes three shanks and teeth
Rear Attachment Control
+ -Control, ripper
Control, winch
Control, ripper and winch
Machine Control And Guidance
+ -Installation, AccuGrade ready, includes Cat Grade Control Slope Assist
Power Pitch blade control
Starting Aids
+ -Heater, engine, coolant, 120 volt
Starting aid, ether
Other Attachments
+ -Machine Security System
Antifreeze
+ -Extended life coolant, –50° C (–58° F)
Field Installed Attachment
+ -Winch, hydrostatic