Menu
View Details

Tap to Call

Cat | D6T Track-Type Tractor | Caterpillar

Cat | D6T Track-Type Tractor | Caterpillar

At a Glance

Engine Model
Cat C9.3 ACERT™
Flywheel Power
215 HP
Operating Weight
47138 lb
Displacement
567 in³
Request a Demo Machine Comparison

Overview

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Engine

+ -
Engine Model Cat C9.3 ACERT™
Flywheel Power 215HP
Displacement 567in³
Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm 245HP
Net Power - 2,200 rpm - ISO 9249/SAE J1349 215HP
Build Number 19
Emissions U.S. EPA Tier 4 Final
Note (1) All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD
Note (2) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

Weights

+ -
Operating Weight 47138lb

Service Refill Capacities

+ -
Fuel Tank 97.2gal (US)
Cooling System 12.2gal (US)
Engine Crankcase 6.5gal (US)
Power Train 39.1gal (US)
Final Drive - Each 3.6gal (US)
Roller Frames - Each 6.6gal (US)
Pivot Shaft Compartment 1.3gal (US)
Hydraulic Tank 16.5gal (US)
DEF Tank 4.5gal (US)

Operating Weights

+ -
LGP VPAT 54526lb
LGP A 53829lb
LGP S 51385lb
XL A 47846lb
XL SU 47138lb
XL VPAT 53042lb
XW A 49797lb
XW SU 48909lb
XW VPAT 54045lb
Note Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

Blades - Capacity

+ -
LGP VPAT - Blade 6.57yd³
LGP A-Blade 6.46yd³
LGP S-Blade 4.96yd³
XL A - Blade 5.17yd³
XL SU - Blade 7.26yd³
XL VPAT - Blade 6.07yd³
XW A - Blade 5.69yd³
XW SU - Blade 7.38yd³
XW VPAT - Blade 6.57yd³

Blades - Width

+ -
XL SU - Blade 10.7ft
XL A - Blade 13.7ft
XL VPAT - Blade 12.7ft
XW SU - Blade 11.7ft
XW A - Blade 14.8ft
XW VPAT - Blade 13.7ft
LGP S-Blade 13.3ft
LGP A-Blade 16.6ft
LGP VPAT - Blade 13.7ft

Dimensions - XL VPAT

+ -
Length - Basic Tractor(2) 16.08ft
Ground Clearance 15in
Ground Pressure (ISO 16754)(3) 9.78psi
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Length - Track on Ground 9.25ft
Machine Height - To Product Link Antenna(1) 10.67ft
Width - Tractor - Without Trunnions - Standard Track 8.92ft

Dimensions - XW VPAT

+ -
Width - Tractor - Without Trunnions - Standard Track 9.83ft
Machine Height - To Product Link Antenna(1) 10.83ft
Length - Track on Ground 10.67ft
Length - Basic Tractor(2) 16.42ft
Ground Clearance 16in
Ground Pressure (ISO 16754)(3) 6.92psi
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions - LGP VPAT

+ -
Width - Tractor - Without Trunnions - Standard Track 10.33ft
Machine Height - To Product Link Antenna(1) 10.83ft
Length - Track on Ground 10.67ft
Length - Basic Tractor(2) 16.42ft
Ground Clearance 16in
Ground Pressure (ISO 16754)(3) 6.28psi
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions - LGP

+ -
Ground Clearance 16in
Ground Pressure (ISO 16754)(3) 5.11psi
Length - Basic Tractor(2) 14.5ft
Length - Track on Ground 10.67ft
Machine Height - To Product Link Antenna(1) 10.83ft
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track 10.5ft

Dimensions

+ -
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.

Dimensions - XL

+ -
Ground Clearance 15in
Ground Pressure (ISO 16754)(3) 8.66psi
Length - Basic Tractor(2) 13.83ft
Length - Track on Ground 9.25ft
Machine Height - To Product Link Antenna(1) 10.67ft
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track 8ft

Dimensions - XW

+ -
Ground Clearance 15in
Ground Pressure (ISO 16754)(3) 6.64psi
Length - Basic Tractor(2) 13.83ft
Length - Track on Ground 9.25ft
Machine Height - To Product Link Antenna(1) 10.67ft
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track 9.17ft