Menu
View Details

Tap to Call

7395 Electric Rope Shovel

7395 Electric Rope Shovel

At a Glance

Dipper Payload
70 t
Dipper Capacity
20.6-55.8 m3 (27-73 yd3)
Working Weight - With Dipper and Standard Links
2652000 lb
Ballast - Furnished By Customer
574000 lb
Request a Demo Machine Comparison

Overview

Dimensions

+ -
Dipper Payload 70t
Dipper Capacity 20.6-55.8 m3 (27-73 yd3)
Note Dependent on application and material density.

Weights

+ -
Working Weight - With Dipper and Standard Links 2652000lb
Ballast - Furnished By Customer 574000lb
Note (1) These weights will vary slightly depending upon dipper and optional equipment selection.
Note (2) All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.

Front End

+ -
Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Crowd Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Rope Data - Boom Suspension - Diameter 3.25in
Rope Data - Boom Suspension - No. 4
Rope Data - Crowd - Diameter 2.5in
Rope Data - Crowd - No. 1
Rope Data - Dipper Trip - Diameter 0.625in
Rope Data - Dipper Trip - No. 1
Rope Data - Hoist - Diameter 2.75in
Rope Data - Hoist - No. 2
Rope Data - Retract - Diameter 2.5in
Rope Data - Retract - No. 1
Note High impact ropes available as an option

Electrical

+ -
Drive IGBT Acutrol drive system.
Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V
Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V, 11,000V
Power Requirements - 60 Hz 7,200V
Power Requirements - Average Power Demand 777-1087 kW (1,042-1,458 hp)
Power Requirements - Peak power 4165HP
Note Other voltages available to suit customer requirements.

Main Structures

+ -
Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard 32.75ft
Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads 34.75ft
Ground Bearing Pressure Ground bearing pressure is dependent upon many factors.
Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard 54psi
Ground Bearing Pressure - Total Effective Bearing Area (2) 442ft²
Hoist A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Ground Bearing Pressure - 274.3 cm (108 in) Treads 43psi
Ground Bearing Pressure - Total Effective Bearing Area (1) 343ft²
Planetary Propel Dual-motor independent drive.
Swing Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Upper Works Overall Width - Including Standard Walkways 44.25ft

Lube System

+ -
Type Automatic, single-line system for open gear lubricant and grease.
Components (1) 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
Components (2) External fast fill from lower level.

Optimal Working Ranges*

+ -
Cutting Height - Maximum 48.75ft
Cutting Radius - Maximum 74.75ft
Dumping Height - With Clearance to Open Dipper Door 30.84ft
Radius of Level Floor 52.49ft
Revolving Frame Tail Swing Radius 30.51ft
Note (1) Optimal working ranges based on loading a Cat® 793F truck.
Note (2) *All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.