View Details

Tap to Call

6060 AC/6060 AC FS Hydraulic Shovel

6060 AC/6060 AC FS Hydraulic Shovel

At a Glance

Electric Motor - Output
1800 kW (2,414 hp)
6060 AC FS - Standard Track Pads
4.59 ft
Bucket Payload
67.5 ton (US)
6060 AC FS - Operating Weight
1210330 lb
Request a Demo Machine Comparison



+ -
Electric Motor - Output 1800 kW (2,414 hp)
Bucket Payload 67.5ton (US)
Operating Weight 605.2ton (US)
Note Specifications shown above apply to Face Shovel configuration. A Backhoe configuration is also available.

Operating Weights

+ -
6060 AC FS - Standard Track Pads 4.59ft
6060 AC FS - Operating Weight 1210330lb
6060 AC FS - Ground Pressure 24.5 N/cm² (35.6 psi)
6060 AC - Ground Pressure 24.5 N/cm² (35.6 psi)
6060 AC - Operating Weight 1208120lb
6060 AC - Standard Track Pads 4.59ft
6060 FS - Ground Pressure 26.4 N/cm² (38.3 psi)
6060 - Standard Track Pads 4.59ft
6060 FS - Standard Track Pads 4.59ft
6060 - Operating Weight 1298510lb
6060 FS - Operating Weight 1300710lb
6060 - Ground Pressure 26.3 N/cm² (38.1 psi)
Note Other track pads available on request.

Hydraulic System with Pump Managing System

+ -
Maximum Pressure - Travel 5365psi
Swing Pumps 3 × reversible swash plate pumps
Maximum Oil Flow - Swing Pumps 3 × 486 L/min (3 × 128 gal/min)
Maximum Pressure - Swing Pumps 5365psi
Total Volume of Hydraulic Oil - Approximately 2483gal (US)
Hydraulic Tank Capacity - Approximately 1320gal (US)
Main Pumps 4 × variable flow axial piston pumps
Maximum Oil Flow - Main Pumps 4 × 925 L/min (4 × 244 gal/min)
Maximum Pressure - Attachment 4640psi
Pump Managing System contains: – Electronic power limit control
– Flow on demand from main pumps depending on joystick position
– Automatic regulation of main pumps to zero flow without demand
– Automatic oil flow reduction of main pumps at:
  • Low line voltage to prevent
Features (1) Pressure cut-off for main pumps
Features (2) Cooling of pump transmission gear oil
Filters – Full-flow high-pressure filters (100 ?m) for the main pumps, installed directly behind each pump
– High pressure filters (200 ?m) for the closed swing circuit
– Full-flow filters (10 ?m) for the complete return circuit
– Pressure filters (40 ?m

Swing System

+ -
Swing Drive 4 compact planetary transmissions with axial piston motors
Maximum Swing Speed 3.8r/min
Swing Ring Triple-race roller bearing with sealed internal gearing
Features (1) Closed-loop swing circuit with torque control
Parking Brakes Wet multiple disc brake, spring loaded/hydraulically released
Features (2) Hydraulic braking of the swing motion by counteracting control
Features (3) All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
Features (4) Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody

Operating Specifications

+ -
Operating Weight - Backhoe 604ton (US)
Bucket Payload - Backhoe 67ton (US)
Operating Weight - Face Shovel 605ton (US)
Operating Weight - Face Shovel 650ton (US)
Bucket Payload 67ton (US)
Bucket Payload - Face Shovel 67ton (US)

Electric Motor - 6060 AC/6060 AC FS

+ -
Type Squirrel cage induction motor
Output 2414HP
Rated Current IN 185 A (at 6.6 kV)
Voltage 6.6 kV ± 10% (other on request)
Frequency 50 Hz (60 Hz on request)
Revolutions 1,500 min-1 (1,800 min-1 at 60 Hz)
Starting current 450% of IN (253% of IN Optional)
Maximum Operational Altitude 2000 m above sea level (6,600 ft above sea level)
Components (1) Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions
Components (2) Power limit control by Pump Managing System

Electrical System

+ -
System Voltage 24V
Components (1) Battery isolation relays and switches
Components (2) Emergency stop switches accessible from ground level and in engine module
Batteries in Series/Parallel Installation 6 × 210 Ah – 12V each; 630 Ah – 24V in total
Components (3) 12 LED high-brightness working flood lights
– 10 for working area
– 2 for rear end
Components (4) 2 LED high-brightness access flood lights
Components (5) 16 LED service lights

Standard Bucket Capacity

+ -
Backhoe (heaped 1:1) 44.5yd³
Face Shovel (heaped 2:1) 44.5yd³


+ -
Type (1) Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas
Type (2) Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type (3) Booms and sticks are stress-relieved after welding
Type (4) Catwalks with rails at booms
Type (5) Inspection holes in booms (FS and BH) and stick (FS)
Type (6) Guards for shovel cylinders (FS)
Type (8) Special wear packages for highly abrasive materials on request
Type (7) Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) – Horizontal automatic constant-angle bucket guidance
– Vertical automatic constant-angle bucket guidance
– Automatic roll-back limiter to prevent material spillage
– Kinematic assistance to hydraulic forces
– Constant boom momentum throughout
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) – Horizontal Automatic constant-angle bucket guidance
– Vertical Automatic constant-angle bucket guidance
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) – Constant boom momentum throughout the entire lift arc
– Crowd force assistance
All buckets (FS and BH) are equipped with a wear package consisting of: (1) – Special liner material covering main wear areas inside and outside of bucket
– Lip shrouds between teeth
– Wing shrouds on side walls
– Heel shrouds at bottom edges
All buckets (FS and BH) are equipped with a wear package consisting of: (2) – Wing shrouds on side walls
– Heel shrouds at bottom edges

Electric Motor

+ -
Output 2414HP

Hydraulic Oil Cooling

+ -
Features (1) Cooling system is fully independent of all main circuits, i.e. controlled cooling capacity is available whenever motor is running
Features (2) Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
Features (3) Fan speed and flow of oil to the coolers are thermostatically controlled
Features (4) Extremely high cooling efficiency to ensure optimum oil temperature
Components Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
Oil Flow of Cooling Pumps 2 × 486/2 × 474 L/min (2 × 128/2 × 125 gal/min)
Diameter - Fan 4 × 1170 mm (4 × 46 in)

Retractable Service Station

+ -
Installation Retractable service station installed underneath the engine module and easily accessible from ground.
Equipped With (1) Quick couplings for:
– Pump transmission gear oil – left/right
– Hydraulic oil tank
– Grease container
Equipped With (2) Cat jump-start socket
Equipped With (3) Indicator lights for fuel tanks left/right full and grease container full

Operator's Cab

+ -
Operator's Eye Level - Approximately 24.93ft
Internal Dimensions of Cab - Length 7.22ft
Internal Dimensions of Cab - Width 5.25ft
Internal Dimensions of Cab - Height 7.05ft
Components (1) Under roof mounted heating ventilating and air conditioning system
Components (2) Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, safety belt, head and armrests
Components (3) Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Components (4) Joystick controls integrated in independently adjustable seat consoles
Components (5) Fold-away auxiliary seat with safety belt
Components (6) Operator Protective Guard (Top Guard approved according to ISO 10262:1998)
Components (7) All-round safety glass, armored windshield and sliding side window
Components (8) Windshield with parallel intermittent wiper/washer
Components (9) Roller blinds at all windows
Components (10) External sun shields at side and rear windows
Components (11) Robust instrument panel including large colored BCS screen with transflective technology
Components (12) Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of electric motor, hydraulic system and lubrication system
Components (13) Machine access via retractable access stairway, stairway angle approximately 35°, hydraulically operated
Components (14) Sliding emergency ladder (kick-down type) with ladder cage
Board Control System (BCS III) Electronic monitoring, data logging and diagnostic system for vital signs and service data of engines, hydraulic system and lubrication system, featuring:
– Robust instrument panel including large (12 in) colored touch screen for intuitive handling


+ -
Travel Speed - Two Stages - 1st Stage - Maximum 0.87mile/h
Travel Speed - Two Stages - 2nd Stage - Maximum 1.24mile/h
Maximum Tractive Force 661160lb
Gradeability - Travel Drives - Maximum 47%
Track Pads - Each Side 42
Bottom Rollers - Each Side 7
Support Rollers - Each Side 2 plus a skid plate in between
Travel Drives - Each Side 1 planetary transmission with 2 two-stage axial piston motors
Parking Brakes Wet multiple-disc brake, spring applied/hydraulically released
Components (1) Cast double-grouser combined pad links with bushings connected by hardened full floating pins
Components (2) All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
Components (3) Bottom rollers are connected to the automatic lubrication system
Components (4) Fully hydraulic, self-adjusting track tensioning system with piston accumulator
Components (5) Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Components (6) Acoustic travel alarm
Travel Speed - 1st Stage - Maximum 0.68mile/h
Travel Speed - 2nd Stage - Maximum 0.99mile/h

Automatic Lubrication System

+ -
Capacity - Grease Container 264gal (US)
Type (1) Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
Type (2) Connected to the main lubrication system are:
– raceways of the swing roller bearing
– two greasing pinions for the internal gearing of the swing ring
– pivot points of attachment, bucket and cylinders
– bottom rollers of undercarriage
Type (3) System failures displayed by Board Control System
Type (4) Grease filters (200 ?m) between service station and container as well as directly behind grease pump
Type (5) Connected to main lube system are:
– raceways of swing roller bearing
– 2 greasing pinions for the internal gearing of swing ring


+ -
Feature (1) TriPower shovel attachment
Feature (2) Independent oil-cooling system
Feature (3) Spacious walk-through machine house
Feature (4) 5-circuit hydraulic system
Feature (5) On-board electronics system: Control and Monitoring Platform (CAMP)
Feature (6) Board Control System (BCS)
Feature (7) Operator Assist (OA)
Feature (8) Torque control in closed-loop swing circuit
Feature (9) Automatic central lubrication system
Feature (10) LED working lights