Menu
View Details

Tap to Call

120 - 2019 - N Am, Global

120 - 2019 - N Am, Global

At a Glance

Net Power Range (Tier 4)
139 HP
Lever/Steering Wheel Weight* Tier 4
35.067 lb
Basic Blade Width
12 ft
Engine Model
Cat 7.1
Request a Demo Machine Comparison

Overview

Engine

+ -
Net Power Range (Tier 4) 139HP
Engine Model Cat 7.1
All-Wheel Drive Net Power Range (Tier 3) 130HP
All-Wheel Drive Net Power Range (Tier 4)
Bore 4.1in
Derating Altitude 9842.5ft
Derating Altitude (AWD) 5499ft
Displacement 427.8in³
Emissions U.S. EPA Tier 4 Final/EU Stage IV - U.S. EPA Tier 3/EU Stage IIIA
Engine RPM 2,000
Maximum Torque - AWD On 611lb/ft
Maximum Torque - ISO 9249 606lb/ft
Net Power Range (Tier 3) NaNHP
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture."
Note (2) Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Note (3) Power as declared per ISO 14396
Number of Cylinders 6
Standard Capability 122°F
Stroke 5.3in
Torque Rise - ISO 9294 42%

Machine Weight

+ -
Lever/Steering Wheel Weight* Tier 4 35.067lb
Joystick All-Wheel Drive (AWD) Weight* Tier 3 36.374lb
Joystick All-Wheel Drive (AWD) Weight* Tier 4 36.846lb
Joystick Weight* Tier 3 34.886lb
Joystick Weight* Tier 4 35.358lb
Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 3 36.275lb
Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 36.731lb
Lever/Steering Wheel Weight* Tier 3 34.61lb
Note (1) *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.

Dimensions

+ -
Basic Blade Width 12ft
Length of Machine* 387in
Maximum Height 151in
Note *Typically equipped with push block and ripper.
Width 102in
Width All Wheel Drive (AWD) 2551mm

Blade Range

+ -
Blade Tip Range Backward 5
Blade Tip Range Forward 40
Circle Center Shift Left 26in
Circle Center Shift Right 26in
Maximum Depth of Cut 30.5in
Maximum Lift Above Ground 16.1in
Maximum Shoulder Reach Left 69.4in
Maximum Shoulder Reach Right 76in
Moldboard Side Shift Left 20.1in
Moldboard Side Shift Right 26.1in

Moldboard

+ -
Arc Radius 16.3in
Blade Height 24in
Blade Width 12ft
Cutting Edge 6in
End Bit 6in
Throat Clearance 4.1in

Service Refill Capacities

+ -
Circle Drive 1.8gal (US)
Cooling System 14gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only) 5gal (US)
Engine Crankcase 4.8gal (US)
Fuel Tank 65gal (US)
Hydraulic System 25.6gal (US)
Transmission and Differential 9gal (US)