View Details

Tap to Call

14 Motor Grader

14 Motor Grader

At a Glance

Base Power (1st Gear) - Net
238 HP
Operating Weight - Typically Equipped
57250 lb
Blade Width
14 ft
Engine Model
Cat C13
Request a Demo Machine Comparison


Cat® Motor Graders continue the Caterpillar tradition of being the industry standard in heavy construction, road building, and governmental applications. The 14 (14M3) features a host of integrated technology solutions that increase operator efficiency, boost productivity levels and lower owning and operating costs. The 14 takes advantage of a larger engine, increased fuel efficiency, improved machine balance, enhanced transmission performance, more powerful telematics and added operator safety/convenience features.


+ -
Base Power (1st Gear) - Net 238HP
Engine Model Cat C13
Bore 5.1in
Stroke 6.2in
Speed at Rated Power 1,850 rpm
Standard - Fan Speed - Maximum 1,600 rpm
Note (5) Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Note (4) Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Standard - Fan Speed - Minimum 550 rpm
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Maximum Altitude - Full Power (Tier 2) 12049ft
Maximum Altitude - Full Power (Tier 3) 14349ft
Emissions Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Maximum Torque - VHP Plus 1137lb/ft
Torque Rise 41%
Maximum Altitude - Full Power 13900ft
Note (2) Optimized VHP Plus is standard for the 14M3.
Standard Capability 122°F
Note (3) Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Displacement 763in³
Number of Cylinders 6


+ -
Operating Weight - Typically Equipped 57250lb
Note *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Gross Vehicle Weight - Base* - Rear Axle 36994lb
Gross Vehicle Weight - Typically Equipped - Front Axle 15245lb
Gross Vehicle Weight - Typically Equipped - Rear Axle 42005lb
Gross Vehicle Weight - Typically Equipped - Total 57250lb
Gross Vehicle Weight - Base* - Front Axle 13994lb
Gross Vehicle Weight - Base* - Total 50980lb


+ -
Blade Width 14ft
Arc Radius 16.3in
Throat Clearance 4.6in
Blade Height - Without Cutting Edge 23in
Blade Width - Without End Bits 164in
Blade Height - With Cutting Edge 24.9in
Blade Width - With End Bits 169in

Blade Range

+ -
Maximum Depth of Cut 23.3in
Blade Tip Range - Forward 40°
Maximum Shoulder Reach Outside of Tires - Left 73.6in
Moldboard Sideshift - Left 29.1in
Moldboard Sideshift - Right 31.1in
Maximum Shoulder Reach Outside of Tires - Right 78.9in
Blade Tip Range - Backward
Circle Centershift - Right 20.5in
Maximum Lift Above Ground 16.5in
Circle Centershift - Left 25.6in

Service Refill Capacities

+ -
Fuel Tank 109.9gal (US)
Cooling System 15.9gal (US)
Circle Drive 1.8gal (US)
Hydraulic System 33gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only) 5.8gal (US)
Transmission and Differential 23.5gal (US)

Air Conditioning System

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).


+ -
Front Axle - Total Oscillation per Side 32°
Front Axle - Wheel Lean - Left/Right 17.1°
Circle - Outer Diameter 71.7in