Menu
View Details

Tap to Call

16 Motor Grader

16 Motor Grader

At a Glance

Base Power (1st Gear) - Net
290 HP
Operating Weight - Typically Equipped
71454 lb
Blade Width
16 ft
Engine Model
Cat® C13
Request a Demo Machine Comparison

Overview

The 16 Motor Grader will have a direct impact on mine site productivity and costs. The haul road is either the mine’s greatest asset or greatest liability. When haul roads are kept in top condition, trucks live longer and run faster. Good road conditions are key on extending truck life, reducing maintenance, lowering fuel costs and reducing tire damage, as a result, cycle times are improved and more ore is produced at a lower cost. The 16 is ideal fit for:

  • Small to medium size mining operations which run 150 ton or smaller hauling trucks.
  • As a complement to a 24M size motor grader fleet in large mining operations where additional versatility is required for ditch and berm building and cleaning, maintenance of secondary narrower roads or side/bank slope work.

The 16 includes features that provide large benefits on operating cost reduction, uptime & performance improvements as well as enhanced safety.

Engine

+ -
Base Power (1st Gear) - Net 290HP
Engine Model Cat® C13
Bore 5.1in
Stroke 6.2in
Speed at Rated Power 2,000 rpm
Optimized VHP Range - Net 216-259 kW (290-348 hp)
Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) 12500ft
VHP Range - Net 216-259 kW (290-348 hp)
Emissions (1) U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 39%
Emissions (3) Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country
Standard - Fan Speed - Maximum 1,450 rpm
Standard - Fan Speed - Minimum 550 rpm
Base Power (1st Gear) - Net - Metric 294HP
VHP Range - Net - Metric 216-259 kW (294-353 hp)
Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 12973ft
Standard - Ambient Capability 122°F
Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 39%
Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) 43%
Emissions (2) Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country
Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 1270lb/ft
Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) 1306lb/ft
Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 12176ft
Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 1270lb/ft
Displacement 763in³
Number of Cylinders 6

Weights

+ -
Operating Weight - Typically Equipped 71454lb

Moldboard

+ -
Blade Width 16ft
Arc Radius 16.3in
Throat Clearance 5in
End Bit - Thickness 0.75in
Blade Pull* - Maximum GVW 52878lb
Down Force - Base GVW 30743lb
Width 16ft
Height 31in
Down Force - Maximum GVW 43861lb
Cutting Edge Thickness 1in
Cutting Edge Width 8in
Blade Pull* - Base GVW 41039lb
End Bit - Width 6in
Thickness 1in
Note *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.

Service Refill

+ -
Fuel Capacity 131gal (US)
Cooling System 18.5gal (US)
Hydraulic System - Tank 18.5gal (US)
Hydraulic System - Total 38.6gal (US)
DEF Tank 4.2gal (US)
Engine Oil 9.5gal (US)
Transmission - Differential - Final Drives 34gal (US)
Tandem Housing - Each 34gal (US)
Front Wheel Spindle Bearing Housing 0.24gal (US)
Circle Drive Housing 2.6gal (US)

Power Train

+ -
Forward/Reverse Gears 8 Forward/6 Reverse
Transmission Direct drive, power shift, countershaft
Brakes - Parking Spring applied, hydraulically released
Brakes - Service Oil-actuated, oil disc
Brakes - Secondary Oil-actuated, oil-disc
Brakes - Dynamic Brake Torque per Wheel 27069.27lb/ft

Hydraulic System

+ -
Circuit Type Electro-hydraulic load sensing, closed center
Pump Type Variable piston
Maximum System Pressure 3590psi
Standby Pressure 856psi
Note *Pump output measured at 2,150 rpm.
Pump Output* 74gal/min

Blade Range

+ -
Maximum Blade Position Angle 65°
Maximum Lift Above Ground 15.7in
Maximum Depth of Cut 18.5in
Blade Tip Range - Backward
Blade Tip Range - Forward 40°
Maximum Shoulder Reach Outside of Tires - Left 91in
Moldboard Sideshift - Right 31.1in
Circle Centershift - Left 27.2in
Circle Centershift - Right 22in
Moldboard Sideshift - Left 29.1in
Maximum Shoulder Reach Outside of Tires - Right 91in

Dimensions (Approximate)

+ -
Length - Front Axle to Mid Tandem 290in
Length - Front Axle to Moldboard 120.7in
Length - Counterweight to Ripper 474.4in
Ground Clearance - Rear Axle 15.6in
Width - Outside Front Tires 134.3in
Height - Front Axle Center 28.9in
Length - Front Tire to Rear of Machine - Including Tow Hitch 417in
Height - Exhaust Stack 140in
Height - Top of Cab 146.4in
Width - Tire Center Lines 106.4in
Width - Outside Rear Tires 134.3in
Length - Between Tandem Axles 72.5in
Height - Top of Cylinders 121.6in

Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*

+ -
Gross Vehicle Weight - Base** - Rear Axle 45596lb
Gross Vehicle Weight - Base** - Front Axle 17932lb
Gross Vehicle Weight - Maximum Tested - Rear Axle 58753lb
Gross Vehicle Weight - Typically Equipped - Front Axle 19253lb
Gross Vehicle Weight - Maximum Tested - Front Axle 26125lb
Gross Vehicle Weight - Typically Equipped - Total 71454lb
Gross Vehicle Weight - Typically Equipped - Rear Axle 52201lb
Gross Vehicle Weight - Base** - Total 63528lb
Gross Vehicle Weight - Maximum Tested - Total 84877lb
Note (1) *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
Note (2) **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.

Ripper

+ -
Shank Holder Spacing - Minimum 17.5in
Ripping Depth - Maximum 17.8in
Shank Holder Spacing - Maximum 20in
Ripper Shank Holders 7
Penetration Force 30311lb
Pry-Out Force 43700lb
Machine Length Increase, Beam Raised 63.4in

Tandems

+ -
Tandem Oscillation - Front Down 25°
Sidewall Thickness - Inner 0.9in
Sidewall Thickness - Outer 0.9in
Tandem Oscillation - Front Up 15°
Height 25.5in
Width 9.3in
Drive Chain Pitch 2.5in
Wheel Axle Spacing 72.5in

Frame

+ -
Front Axle - Height to Center 26.4in
Front Axle - Wheel Lean 18° Left/17° Right
Front Frame Structure - Thickness 0.6in
Circle - Blade Beam Thickness 2in
Circle - Diameter 71.7in
Front Axle - Total Oscillation per Side 35°
Drawbar - Height 8in
Drawbar - Width 3in
Front Frame Structure - Width 14in
Front Frame Structure - Height 18.1in

Operating Specifications

+ -
Articulation Angle - Left/Right 20°
Reverse - 4th 9.3mile/h
Forward - 2nd 3.8mile/h
Top Speed - Reverse 25.4mile/h
Forward - 1st 2.8mile/h
Reverse - 1st 2.2mile/h
Reverse - 6th 25.3mile/h
Forward - 3rd 5.5mile/h
Top Speed - Forward 32.1mile/h
Forward - 7th 22mile/h
Turning Radius - Outside Front Tires 30.5ft
Forward - 5th 11.8mile/h
Forward - 4th 7.6mile/h
Forward - 6th 16mile/h
Steering Range - Left/Right 47.5°
Note Calculated with no slip and 23.5 R25 L-3 tires.
Forward - 8th 32.1mile/h
Reverse - 3rd 6mile/h
Reverse - 2nd 4.1mile/h
Reverse - 5th 17.4mile/h

Optional Tire Arrangements

+ -
Wheel Group - 19.5×25 MP (3) Tires: 23.5R25 Bridgestone VJT 1 Star
Wheel Group - 19.5×25 MP (1) Tires: 23.5R25 Bridgestone VKT 2 Star
Wheel Group - 19.5×25 MP (5) Tires: 23.5R25 Michelin XLDD 2 Star L5
Wheel Group - 19.5×25 MP (4) Tires: 23.5R25 Michelin XHA 2 Star
Wheel Group - 19.5×25 MP (2) Tires: 23.5R25 Bridgestone VKT 1 Star

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric

+ -
Gear - Reverse 3rd-6th 302HP
Gear - Forward 4th 309HP
Gear - Forward 2nd 294HP
Gear - Forward 5th 315HP
Gear - Forward 1st 294HP
Gear - Forward 3rd 302HP
Gear - Reverse 1st 294HP
Gear - Forward 8th 353HP
Gear - Forward 6th 325HP
Gear - Forward 7th 332HP
Gear - Reverse 2nd 294HP

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net

+ -
Gear - Forward 8th 348HP
Gear - Reverse 3rd-6th 298HP
Gear - Forward 2nd 290HP
Gear - Forward 1st 290HP
Gear - Forward 7th 328HP
Gear - Forward 4th 304HP
Gear - Forward 3rd 298HP
Gear - Reverse 2nd 290HP
Gear - Reverse 1st 290HP
Gear - Forward 5th 311HP
Gear - Forward 6th 320HP

Standards

+ -
Sound ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
ROPS/FOPS ISO 3471:2008/ISO 3449:2005
Brakes ISO 3450:2011
Note (2) The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
Note (1) The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
Steering ISO 5010:2007