Menu
View Details

Tap to Call

226D3 Skid Steer Loader

226D3 Skid Steer Loader

At a Glance

Gross Power - SAE J1995
67.1 HP
Rated Operating Capacity
1550 lb
Operating Weight
5849 lb
Net Power - SAE 1349
65.8 HP
Request a Demo

Overview

Engine

+ -
Gross Power - SAE J1995 67.1HP
Net Power - SAE 1349 65.8HP
Displacement 134.3in³
Stroke 3.9in
Bore 3.3in
Engine Model Cat C2.2 CRDI
Peak Torque - 1,500 rpm - SAE J1995 153ft·lbf
Net Power - ISO 9249 66.5HP

Operating Specifications

+ -
Rated Operating Capacity 1550lb
Rated Operating Capacity with Optional Counterweight 1650lb
Tipping Load 3100lb
Breakout Force - Tilt Cylinder 3927lb
Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery

Weights

+ -
Operating Weight 5849lb
Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery

Dimensions

+ -
Wheel Base 41.5in
Length - With Bucket on Ground 127.3in
Length - Without Bucket 99.4in
Height - Top of Cab 79.8in
Vehicle Width over Tires 58.9in
Maximum Overall Height 143.8in
Bucket Pin Height - Maximum Lift 110.9in
Bucket Pin Height - Carry Position 8.5in
Reach - Maximum Lift/Dump 21in
Clearance at Maximum Lift and Dump 81.8in
Ground Clearance 6.9in
Departure Angle 27.9°
Maximum Dump Angle 46.7°
Rack Back Angle - Maximum Height 88.9°
Bumper Overhang - Behind Rear Axle 35.2in
Turning Radius from Center - Bucket 77.8in
Maximum Reach - With Arms Parallel to Ground 50.7in
Turning Radius from Center - Machine Rear 59.6in
Turning Radius from Center - Coupler 43.5in
Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery

Cab

+ -
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I

Service Refill Capacities

+ -
Chain Box - Each Side 1.8gal (US)
Cooling System 3.2gal (US)
Engine Crankcase 2.6gal (US)
Fuel Tank 15.1gal (US)
Hydraulic System 11.9gal (US)
Hydraulic Tank 9gal (US)

Hydraulic System

+ -
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3336psi
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 3336psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 33.5HP
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 50.9HP
Hydraulic Flow - Standard - Loader Hydraulic Flow 18gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 26gal/min

Power Train

+ -
Travel Speed - Forward or Reverse - One Speed 7.6mile/h
Travel Speed - Forward or Reverse - Two Speed Option 11.1mile/h

Air Conditioning System (if equipped)

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

+ -
Outside Cab*** 102dB(A)
Inside Cab** 83dB(A)
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe