Menu
View Details

Tap to Call

232D3 Skid Steer Loader

232D3 Skid Steer Loader

At a Glance

Gross Power - SAE J1995
67.1 HP
Rated Operating Capacity
1900 lb
Operating Weight
6514 lb
Net Power - SAE 1349
65.8 HP
Request a Demo

Overview

Engine

+ -
Gross Power - SAE J1995 67.1HP
Net Power - SAE 1349 65.8HP
Displacement 134.3in³
Stroke 3.9in
Bore 3.3in
Peak Torque - 1,500 rpm - SAE J1995 153ft·lbf
Net Flywheel Power 65.8HP
Net Power - ISO 9249 66.5HP
Engine Model Cat C2.2 CRDI

Operating Specifications

+ -
Rated Operating Capacity 1900lb
Tipping Load 3800lb
Breakout Force - Tilt Cylinder 3928lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
Rated Operating Capacity with Optional Counterweight 2000lb

Weights

+ -
Operating Weight 6514lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,

Dimensions

+ -
Wheel Base 41.5in
Height - Top of Cab 79.9in
Vehicle Width over Tires 58.9in
Ground Clearance 6.7in
Departure Angle 27.9°
Maximum Dump Angle 47.4°
Length - Without Bucket 99.3in
Clearance at Maximum Lift and Dump 88.7in
Bucket Pin Reach - Maximum Lift 8.8in
Maximum Overall Height 150.9in
Turning Radius from Center - Machine Rear 59.6in
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
Bucket Pin Height - Carry Position 8.4in
Length - With Bucket on Ground 127.3in
Bumper Overhang - Behind Rear Axle 35.2in
Turning Radius from Center - Bucket 77.8in
Maximum Reach - With Arms Parallel to Ground 49.2in
Bucket Pin Height - Maximum Lift 118.1in
Reach - Maximum Lift/Dump 25.7in
Rack Back Angle - Maximum Height 88.2°
Turning Radius from Center - Coupler 43.4in

Cab

+ -
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I

Service Refill Capacities

+ -
Cooling System 3.2gal (US)
Engine Crankcase 2.6gal (US)
Fuel Tank 15.1gal (US)
Hydraulic System 11.9gal (US)
Hydraulic Tank 9gal (US)
Chain Box - Each Side 1.8gal (US)

Hydraulic System

+ -
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 26gal/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 35.5HP
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 3336psi
Hydraulic Flow - Standard - Loader Hydraulic Flow 18gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3336psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 50.9HP

Power Train

+ -
Travel Speed - Forward or Reverse - One Speed 7.6mile/h
Travel Speed - Forward or Reverse - Two Speed Option 11.1mile/h

Noise Level

+ -
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab* 83 dB(A)
Outside Cab** 101 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee

Air Conditioning System (if equipped)

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.