Menu
View Details

Tap to Call

236D3 Skid Steer Loader

236D3 Skid Steer Loader

At a Glance

Gross Power - SAE J1995
74.3 HP
Rated Operating Capacity
1800 lb
Operating Weight
6567 lb
Net Power - SAE 1349
73.2 HP
Request a Demo

Overview

Engine

+ -
Gross Power - SAE J1995 74.3HP
Net Power - SAE 1349 73.2HP
Displacement 203in³
Stroke 4.7in
Bore 3.7in
Net Flywheel Power 73.2HP
Engine Model Cat 3.3B DIT (turbo)
Peak Torque - 1,500 rpm - SAE J1995 195ft·lbf
Net Power - ISO 9249 73.9HP

Operating Specifications

+ -
Rated Operating Capacity 1800lb
Tipping Load 3600lb
Breakout Force - Tilt Cylinder 5003lb
Rated Operating Capacity with Optional Counterweight 2000lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte

Weights

+ -
Operating Weight 6567lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte

Dimensions

+ -
Wheel Base 43.5in
Height - Top of Cab 82in
Vehicle Width over Tires 66in
Ground Clearance 7.7in
Departure Angle 26°
Maximum Dump Angle 48°
Maximum Reach - With Arms Parallel to Ground 53.3in
Turning Radius from Center - Machine Rear 64.5in
Bucket Pin Height - Maximum Lift 122.9in
Length - Without Bucket 108.9in
Rack Back Angle - Maximum Height 91°
Turning Radius from Center - Bucket 83in
Turning Radius from Center - Coupler 51.8in
Clearance at Maximum Lift and Dump 92.9in
Reach - Maximum Lift/Dump 16in
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte
Bumper Overhang - Behind Rear Axle 40.2in
Maximum Overall Height 156.6in
Length - With Bucket on Ground 137.3in
Bucket Pin Height - Carry Position 7.5in

Cab

+ -
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I

Service Refill Capacities

+ -
Chain Box - Each Side 2.3gal (US)
Cooling System 3.7gal (US)
Engine Crankcase 3gal (US)
Fuel Tank 24.8gal (US)
Hydraulic System 13.2gal (US)
Hydraulic Tank 10.3gal (US)

Hydraulic System

+ -
Hydraulic Flow - Standard - Loader Hydraulic Flow 20gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 3335psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 39HP
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335psi
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 30gal/min
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 58HP

Power Train

+ -
Travel Speed - Forward or Reverse - Two Speed Option 10.6mile/h
Travel Speed - Forward or Reverse - One Speed 7mile/h

Noise Level

+ -
Outside Cab** 101 dB(A)
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab* 83 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Air Conditioning System (if equipped)

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.