Menu
View Details

Tap to Call

259D3 Compact Track Loader

259D3 Compact Track Loader

At a Glance

Gross Power - SAE J1995
74.3 HP
Rated Operating Capacities - 35% Tipping Load
2010 lb
Operating Weight
8987 lb
Tipping Load
5745 lb
Request a Demo

Overview

Engine

+ -
Gross Power - SAE J1995 74.3HP
Displacement 203in³
Net Power 73.2HP
Bore 3.7in
Engine Model Cat C3.3B DIT (turbo)
Gross Power 74.3HP
Net Power - SAE 1349 73.2HP
Stroke 4.7in
Peak Torque - 1,500 rpm - SAE J1995 195ft·lbf
Net Power - ISO 9249 73.9HP

Operating Specifications

+ -
Rated Operating Capacities - 35% Tipping Load 2010lb
Tipping Load 5745lb
Breakout Force - Tilt Cylinder 4965lb
Ground Contact Area - With 320 mm/12.6 in Track 1483in²
Ground Pressure - With 320 mm/12.6 in Track 6.1psi
Rated Operating Capacities - 50% Tipping Load 2870lb
Ground Contact Area - With 400 mm/15.7 in Track 1848in²
Rated Operating Capacity with Optional Counterweight 3060lb
Ground Pressure - With 400 mm/15.7 in Track 4.9psi
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr

Weights

+ -
Operating Weight 8987lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr

Dimensions

+ -
Length - Track on Ground 59in
Overall Length - Track 78.7in
Height - Top of Cab 83.1in
Ground Clearance 8.9in
Departure Angle 35°
Maximum Dump Angle 52°
Bucket Pin Height - Carry Position 7.8in
Vehicle Width (400 mm/15.7 in tracks) 69in
Turning Radius from Center - Coupler 54.8in
Bucket Pin Reach - Maximum Lift 9.4in
Vehicle Width (320 mm/12.6 in tracks) 66in
Maximum Reach - With Arms Parallel to Ground 51.4in
Maximum Overall Height 154.1in
Turning Radius from Center - Bucket 86in
Bucket Pin Height - Maximum Lift 121in
Length - Without Bucket 108.9in
Rack Back Angle - Maximum Height 87°
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr
Turning Radius from Center - Machine Rear 61.5in
Length - With Bucket on Ground 137.3in
Clearance at Maximum Lift and Dump 89.9in
Reach - Maximum Lift/Dump 23.9in

Cab

+ -
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I

Hydraulic System

+ -
Hydraulic Flow - High Flow - Loader Hydraulic Pressure 3335psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 58HP
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335psi
Hydraulic Flow - Standard - Loader Hydraulic Flow 20gal/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 39HP
Hydraulic Flow - High Flow - Loader Hydraulic Flow 30gal/min

Power Train

+ -
Travel Speed - Forward or Reverse - One Speed 5.9mile/h
Travel Speed - Forward or Reverse - Two Speed 8.5mile/h

Service Refill Capacities

+ -
Hydraulic System 13.2gal (US)
Fuel Tank 24.8gal (US)
Engine Crankcase 3gal (US)
Hydraulic Tank 10.3gal (US)
Cooling System 3.7gal (US)

Air Conditioning System (if equipped)

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

+ -
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab*** 103dB(A)
Inside Cab** 83dB(A)
Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.