Menu
View Details

Tap to Call

272D3 Skid Steer Loader

272D3 Skid Steer Loader

At a Glance

Gross Power - SAE J1995
98 HP
Rated Operating Capacity
3450 lb
Operating Weight
9133 lb
Net Power - SAE 1349
95 HP
Request a Demo

Overview

Engine

+ -
Gross Power - SAE J1995 98HP
Net Power - SAE 1349 95HP
Displacement 232in³
Stroke 4.7in
Bore 3.9in
Peak Torque - 1,500 rpm - SAE J1995 246ft·lbf
Engine Model Cat C3.8 DIT (turbo)
Net Power - ISO 9249 96HP
Net Flywheel Power 95HP

Operating Specifications

+ -
Rated Operating Capacity 3450lb
Tipping Load 6900lb
Breakout Force - Tilt Cylinder 7443lb
Breakout Force - Lift Cylinder 6074lb
Rated Operating Capacity with Optional Counterweight 3690lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt

Weights

+ -
Operating Weight 9133lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt

Dimensions

+ -
Wheel Base 54.6in
Height - Top of Cab 82.4in
Vehicle Width over Tires 72in
Ground Clearance 8.9in
Departure Angle 27°
Maximum Dump Angle 51°
Bucket Pin Reach - Maximum Lift 14.7in
Bucket Pin Height - Maximum Lift 127.1in
Turning Radius from Center - Machine Rear 74.7in
Reach - Maximum Lift/Dump 30.3in
Bumper Overhang - Behind Rear Axle 46.2in
Length - Without Bucket 127.6in
Maximum Overall Height 160.1in
Turning Radius from Center - Coupler 58.3in
Maximum Reach - With Arms Parallel to Ground 50.5in
Clearance at Maximum Lift and Dump 96in
Length - With Bucket on Ground 155.7in
Bucket Pin Height - Carry Position 7.8in
Turning Radius from Center - Bucket (racked) 89.8in
Rack Back Angle - Maximum Height 84°
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt
Roll Back Angle 28°

Cab

+ -
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I

Service Refill Capacities

+ -
Cooling System 4.1gal (US)
Engine Crankcase 3.5gal (US)
Fuel Tank 31.7gal (US)
Hydraulic System 14.5gal (US)
Hydraulic Tank 10.3gal (US)
Chain Box - Each Side 2.7gal (US)
Diesel Exhaust Fluid (DEF) Tank 5gal (US)

Hydraulic System

+ -
Hydraulic Flow - Standard - Loader Hydraulic Flow 23gal/min
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) 76HP
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 44HP
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow 32gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335psi
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure 4061psi

Power Train

+ -
Travel Speed - Forward or Reverse - One Speed 6.6mile/h
Travel Speed - Forward or Reverse - Two Speed Option 9.4mile/h

Air Conditioning System (if equipped)

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

+ -
Outside Cab** 102 dB(A)
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Inside Cab* 83 dB(A)
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.