Menu
View Details

Tap to Call

272D3 XE Skid Steer Loader

272D3 XE Skid Steer Loader

At a Glance

Gross Power - SAE J1995
110 HP
Rated Operating Capacity
3700 lb
Operating Weight
9573 lb
Net Power - SAE 1349
106 HP
Request a Demo

Overview

Engine

+ -
Gross Power - SAE J1995 110HP
Net Power - SAE 1349 106HP
Displacement 232in³
Stroke 4.7in
Bore 3.9in
Net Flywheel Power 106HP
Engine Model Cat C3.8 DIT (turbo)
Net Power - ISO 9249 107HP
Peak Torque - 1,500 rpm - SAE J1995 276ft·lbf

Operating Specifications

+ -
Rated Operating Capacity 3700lb
Tipping Load 7400lb
Breakout Force - Tilt Cylinder 7362lb
Breakout Force - Lift Cylinder 6085lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Rated Operating Capacity with Optional Counterweight 3950lb

Weights

+ -
Operating Weight 9573lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA

Dimensions

+ -
Wheel Base 54.6in
Height - Top of Cab 84in
Vehicle Width over Tires 76in
Ground Clearance 10.4in
Departure Angle 28°
Maximum Dump Angle 51°
Bumper Overhang - Behind Rear Axle 46.2in
Turning Radius from Center - Machine Rear 74.7in
Length - Without Bucket 127in
Reach - Maximum Lift/Dump 29in
Clearance at Maximum Lift and Dump 97.4in
Bucket Pin Height - Maximum Lift 128.6in
Bucket Pin Height - Carry Position 9.3in
Turning Radius from Center - Coupler 57.7in
Bucket Pin Reach - Maximum Lift 13.5in
Rack Back Angle - Maximum Height 84°
Maximum Overall Height 161.5in
Length - With Bucket on Ground 155in
Maximum Reach - With Arms Parallel to Ground 49.1in
Turning Radius from Center - Bucket (racked) 90.6in
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Roll Back Angle 28°

Cab

+ -
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I

Service Refill Capacities

+ -
Cooling System 4.1gal (US)
Engine Crankcase 3.5gal (US)
Fuel Tank 31.7gal (US)
Hydraulic System 14.5gal (US)
Hydraulic Tank 10.3gal (US)
Chain Box - Each Side 2.7gal (US)
Diesel Exhaust Fluid (DEF) Tank 5gal (US)

Hydraulic System

+ -
Standard Flow Mode - Loader Hydraulic Pressure 3335psi
Standard Flow Mode - Hydraulic Power - Calculated 44HP
Standard Flow Mode - Loader Hydraulic Flow 23gal/min
Note *When equipped with Cat 400 Series work tools.
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure 4061psi
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* 40gal/min
Hydraulic Flow - XE - Hydraulic Power (calculated) 94HP

Power Train

+ -
Travel Speed - Forward or Reverse - One Speed 7.2mile/h
Travel Speed - Forward or Reverse - Two Speed 10.3mile/h

Air Conditioning System (if equipped)

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

+ -
Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Outside Cab*** 104dB(A)
Inside Cab** 83dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.