Menu
View Details

Tap to Call Find a Sales Rep

236D Skid Steer Loader

236D Skid Steer Loader

At a Glance

Engine Model
Cat C3.3B DIT (turbo)
Net Flywheel Power
73.2 HP
Rated Operating Capacity
1800 lb
Operating Weight
6559 lb
Request a Demo Machine Comparison

Overview

The Cat 236D Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Engine

+ -
Engine Model Cat C3.3B DIT (turbo)
Net Flywheel Power 73.2HP
Gross Power - SAE J1995 74.3HP
Net Power - SAE 1349 73.2HP
Displacement 203in³
Stroke 4.7in
Bore 3.7in
Net Power - ISO 9249 73.9HP
Peak Torque - 1,500 rpm - SAE J1995 195HP

Operating Specifications

+ -
Rated Operating Capacity 1800lb
Tipping Load 3600lb
Breakout Force - Tilt Cylinder 5074lb
Rated Operating Capacity with Optional Counterweight 2000lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweight

Weights

+ -
Operating Weight 6559lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweight

Dimensions

+ -
Wheel Base 43.5in
Height - Top of Cab 82in
Vehicle Width over Tires 66in
Ground Clearance 7.7in
Departure Angle 26°
Maximum Dump Angle 48°
Reach - Maximum Lift/Dump 16in
Bumper Overhang - Behind Rear Axle 40.2in
Bucket Pin Height - Carry Position 7.5in
Bucket Pin Height - Maximum Lift 122.9in
Clearance at Maximum Lift and Dump 92.9in
Length - With Bucket on Ground 137.3in
Length - Without Bucket 108.9in
Maximum Overall Height 156.6in
Maximum Reach - With Arms Parallel to Ground 53.3in
Rack Back Angle - Maximum Height 91°
Turn Radius from Center - Bucket 83in
Turn Radius from Center - Coupler 51.8in
Turn Radius from Center - Machine Rear 64.5in
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweight

Cab

+ -
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
FOPS Level II ISO 3449:2005 Level II

Service Refill Capacities

+ -
Chain Box - Each Side 2.3gal (US)
Cooling System 3.7gal (US)
Engine Crankcase 3gal (US)
Fuel Tank 27.7gal (US)
Hydraulic System 13.2gal (US)
Hydraulic Tank 10.3gal (US)

Hydraulic System

+ -
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 58HP
Hydraulic Flow - High Flow - Loader Hydraulic Flow 30gal/min
Hydraulic Flow - High Flow - Loader Hydraulic Pressure 3335psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 39HP
Hydraulic Flow - Standard - Loader Hydraulic Flow 20gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335psi

Power Train

+ -
Travel Speed - Forward or Reverse - One Speed 7mile/h
Travel Speed - Forward or Reverse - Two Speed Option 10.6mile/h

Air Conditioning System

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

+ -
Inside Cab* 83 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab** 101 dB(A)