TL642D Telehandler
At a Glance
|
|
|
|
Overview
The TL642D is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.
Operating Specifications
+ -Rated Load Capacity | 6500lb |
Maximum Lift Height | 42ft |
Maximum Forward Reach | 30ft |
Top Travel Speed | 21mile/h |
Capacity at Maximum Height | 6500lb |
Capacity at Maximum Reach | 700lb |
Drawbar Pull - Loaded | 19783lbf |
Frame Leveling | 10° |
Turning Radius - Over Tires | 12ft |
Engine
+ -Engine Model | Cat® C3.4B |
Gross Power - Basic | 100hp |
Note | Meets U.S. EPA Tier 4 Final emission standards. |
Weights
+ -Operating Weight | 22002lb |
Tires
+ -Standard | 370/75-28 Air Duraforce |
Optional (1) | 370/75-28 Foam Duraforce |
Optional (2) | 13.00 × 24-16 PR Air |
Optional (3) | 13.00 × 24-12 PR Foam Filled |
Optional (4) | 13.00 × 24 Solid |
Service Refill Capacities
+ -Fuel Tank | 38.3gal (US) |
Diesel Exhaust Fluid (DEF) Tank | 5.7gal (US) |
Hydraulic System | 40gal (US) |
Boom Performance
+ -Boom Up | 15s |
Boom Down | 10.3s |
Tele In | 9.5s |
Tele Out | 16.3s |
Hydraulic System
+ -Gear Pump | Single-section |
Auxiliary Hydraulic Flow | 18gal/min |
Auxiliary Hydraulic Pressure | 3481psi |
Note | Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. |
System Operating Pressure | 3770psi |
Axles
+ -Type (2) | High bias limited slip differential on front axle. |
Type (1) | Trunnion mounted planetary 55 degree steer axles. |
Braking System
+ -Parking Brakes | Wet disc, spring applied hydraulic release on front axle |
Service Brakes | Inboard wet disc brakes on front and rear axles |
Transmission Speeds
+ -Forward | 4 speed |
Reverse | 3 speed |
Work Tools
+ -Carriages - Dual Fork Positioning | 50in |
Carriages - Side Shift | 48in |
Carriages - Standard Rotate | 50in |
Carriages - Standard Tilt | 50in |
Carriages - Swing | 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) |
Carriages - Wide Rotate | 72in |
Carriages - Wide Tilt | 72in |
Cubing Forks | [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) |
Hydraulic IT Coupler | Includes Auxiliary Electrics |
Lumber Forks - Option 1 | [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) |
Lumber Forks - Option 2 | [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in) |
Pallet Forks - Option 1 | [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) |
Pallet Forks - Option 2 | [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) |
Pallet Forks - Option 3 | [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in) |