Menu
View Details

Tap to Call

AD45 Underground Articulated Truck

AD45 Underground Articulated Truck

At a Glance

Engine Model
Cat® C18
Engine Power - EU Stage V Engine - ISO 14396:2002
598 HP
Nominal Payload Capacity
99208 lb
Engine Power - Tier 3 Engine - ISO 14396:2002
581 HP
Request a Demo

Overview

The new AD45 underground articulated truck is powered by Cat C18® engine with scalable emission solutions. The truck delivers proven operating efficiency with improvements of serviceability. The AD45 is a powerful new tool for underground mining.

Engine

+ -
Engine Model Cat® C18
Engine Power - EU Stage V Engine - ISO 14396:2002 598HP
Engine Power - Tier 3 Engine - ISO 14396:2002 581HP
Engine Power - VR Engine - ISO 14396:2002 581HP
Bore 5.7in
Stroke 7.2in
Displacement 1104.53in³
Note (1) Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.
Note (2) All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
Note (3) Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines.
Note (4) Optional Ventilation Reduction Package available.
Note (5) Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.
Note (6) Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (7) *<5 %

Operating Specifications

+ -
Nominal Payload Capacity 99208lb
Gross Machine Mass 196765lb
Shipping Mass (Stage V Engine Model) 96225lb
Shipping Mass (Other Engine Models) 94415lb
Body Capacities 18.0-25.1 m³ (23.5-32.8 yd³)

Weights (Stage V Engine Model)

+ -
Operating Mass 91285lb
Operating Mass - Front Axle 64565lb
Operating Mass - Rear Axle 26720lb
Operating Mass + Rated Payload 190495lb
Operating Mass + Rated Payload - Front Axle 89235lb
Operating Mass + Rated Payload - Rear Axle 101260lb

Weights (Other Engine Models)

+ -
Operating Mass 88320lb
Operating Mass - Front Axle 61225lb
Operating Mass - Rear Axle 27095lb
Operating Mass + Rated Payload 187530lb
Operating Mass + Rated Payload - Front Axle 85355lb
Operating Mass + Rated Payload - Rear Axle 102175lb

Weight Distribution (Stage V Engine Model)

+ -
Empty - Front Axle 70.7%
Empty - Rear Axle 29.3%
Loaded - Front Axle 46.8%
Loaded - Rear Axle 53.2%

Weight Distribution (Other Engine Models)

+ -
Empty - Front Axle 69.3%
Empty - Rear Axle 30.7%
Loaded - Front Axle 45.5%
Loaded - Rear Axle 54.5%

Body Hoist (Stage V Engine Model)

+ -
Raise 15 Seconds
Lower 21 Seconds
Total Cycle Time 36 Seconds

Body Hoist (Other Engine Models)

+ -
Raise 14 Seconds
Lower 21 Seconds
Total Cycle Time 35 Seconds

Body Capacities

+ -
Dump Body - 1 23.6yd³
Dump Body - 2 - Standard 27.9yd³
Dump Body - 3 32.8yd³
Ejector Body 29.9yd³
Note Heaped SAE 2:1.

Turning Dimensions

+ -
Outside Clearance Radius* 371in
Inside Clearance Radius* 209in
Frame Oscillation 10°
Articulation Angle 42.5°
Note *Clearance dimensions are for reference only.

Transmission

+ -
Forward - 1 4.4mile/h
Forward - 2 5.9mile/h
Forward - 3 8mile/h
Forward - 4 10.8mile/h
Forward - 5 14.6mile/h
Forward - 6 19.7mile/h
Forward - 7 26.4mile/h
Reverse - 1 4.2mile/h
Reverse - 2 5.6mile/h
Note Maximum travel speeds with standard 29.5 × R29 tires.

Service Refill Capacities

+ -
Engine Crankcase - With Filter 16.9gal (US)
Transmission 15.9gal (US)
Hydraulic Tank 70.3gal (US)
Cooling System 22.5gal (US)
Front Differential and Final Drives 20.3gal (US)
Rear Differential and Final Drives 21.9gal (US)
Fuel Tank 201.8gal (US)

Tires

+ -
Tire Size 29.5 × R29

Standards

+ -
Standards ROPS/FOPS Certified Cab

Final Drives

+ -
Differential Ratio 3.46:1
Final Drive Ratio 5.65:1
Total Reduction Ratio 19.55:1