Menu
View Details

Tap to Call

903D Compact Wheel Loader

903D Compact Wheel Loader

At a Glance

Maximum Gross Power
42 HP
Operating Weight
9414 lb
Bucket Capacities
0.6-1.0 m3 (0.8-1.3 yd3)
Engine Model
Cat C2.4*
Request a Demo Machine Comparison

Overview

Engine

+ -
Maximum Gross Power 42HP
Engine Model Cat C2.4*
Gross Power 42HP
Net Power - 2,200 rpm - SAE J1349 R-ing 40HP
Net Power - 2,200 rpm - ISO 9249 R-ing 40HP
Bore 3.4in
Stroke 4in
Displacement 147in²
Note *Engine meets U.S. EPA Tier 4 Final emission standards.

Weights

+ -
Operating Weight 9414lb

Buckets

+ -
Bucket Capacities 0.6-1.0 m3 (0.8-1.3 yd3)

Transmission

+ -
Travel Speed 12.4mile/h

Hydraulic System

+ -
Main Relief 3481psi
3rd Auxiliary Flow 14gal/min
Hydraulic Cycle Time - Lift 4.4s
Hydraulic Cycle Time - Dump 0.7s
Hydraulic Cycle Time - Lower, Float 2.4s

Cab

+ -
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I

Service Refill Capacities

+ -
Cooling System 3gal (US)
Fuel Tank 11.4gal (US)
Hydraulic System 6.3gal (US)
Engine Oil 2.4gal (US)

Dimensions (Approximate) - Standard Lift

+ -
Cab Height 8.25ft
Ground Clearance 10in
Wheel Base 6.42ft
Overall Length - With Bucket* 15.75ft
Reach at Maximum Dump Height* 2.33ft
Dig Depth 6in
Maximum Dump Height* 7.5ft
Load Over Height 9.17ft
Hinge Pin at Maximum Height 10.08ft
Departure Angle - Degrees 30°
Overall Length - With Forks 17.08ft
Reach - Ground Level 2.67ft
Maximum Reach 4.5ft
Fork Depth Above Ground 2in
Fork Height at Maximum Reach 4.67ft
Maximum Fork Height 9.83ft
Fork Reach at Maximum Height 2ft
Turning Radius - Over Bucket* 13.17ft
Turning Radius - Inside Tire** 5.92ft
Width - Over Bucket* 5.83ft
Tire Gauge 4.33ft
Machine Width** 5.58ft
Articulation Angle 40°
Steering Angle 80°
Dump Angle at Maximum Height 40°
Note (1) *Vary with bucket size.
Note (2) **Vary with tire size.
Note (3) Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.

Dimensions (Approximate) - High Lift

+ -
Cab Height 8.25ft
Ground Clearance 10in
Wheel Base 6.42ft
Overall Length - With Bucket* 16.17ft
Reach at Maximum Dump Height* 2.42ft
Dig Depth 8in
Maximum Dump Height* 8ft
Load Over Height 9.67ft
Hinge Pin at Maximum Height 10.58ft
Departure Angle - Degrees 30°
Overall Length - With Forks 17.58ft
Reach - Ground Level 3.25ft
Maximum Reach 4.92ft
Fork Depth Above Ground 2in
Fork Height at Maximum Reach 4.67ft
Maximum Fork Height 10.33ft
Fork Reach at Maximum Height 2ft
Turning Radius - Over Bucket* 13.42ft
Turning Radius - Inside Tire** 5.92ft
Width - Over Bucket* 5.83ft
Tire Gauge 4.33ft
Machine Width** 5.58ft
Articulation Angle 40°
Steering Angle 80°
Dump Angle at Maximum Height 40°
Note (1) *Vary with bucket size.
Note (2) **Vary with tire size.
Note (3) Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.

Operating Specifications - Standard Lift

+ -
Tire Size 33 × 15.5-16.5, 12 PR
Rated Bucket Capacity 0.8yd³
Breakout Force 6160lbf
Operating Weight 9414lb
Rated Operating Load at Full Turn - Bucket*** 2701lb
Straight Tipping Load - Bucket*** 6415lb
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** 5401lb
Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** 5512lb
Rack Back - Transport Position 51°
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** 3902lb
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** 2932lb
Note (1) *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
Note (2) **Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Note (3) ***Manual quick coupler, precleaner hood.
Note (4) Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.

Operating Specifications - High Lift

+ -
Tire Size 33 × 15.5-16.5, 12 PR
Rated Bucket Capacity 0.8yd³
Breakout Force 6204lbf
Operating Weight 9462lb
Rated Operating Load at Full Turn - Bucket*** 2502lb
Straight Tipping Load - Bucket*** 5975lb
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** 5004lb
Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** 5115lb
Rack Back - Transport Position 51°
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** 3660lb
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** 2756lb
Note (1) *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
Note (2) **Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Note (3) ***Manual quick coupler, precleaner hood.
Note (4) Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.

Maximum Material Densities - General Purpose

+ -
Bucket Type General Purpose
Rated Capacity 0.8yd³
Dump Height 90in
Maximum Material Density 3169lb/yd³
Bucket Width 70in
Note Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.

Maximum Material Densities - Light Material

+ -
Bucket Type Light Material
Rated Capacity 1.3yd³
Dump Height 85in
Maximum Material Density 1989lb/yd³
Bucket Width 74in
Note Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.