Menu
x
View Details

Tap to Call Find a Sales Rep

907M Compact Wheel Loader

907M Compact Wheel Loader

At a Glance

Maximum Gross Power
73 HP
Operating Weight
12677 lb
Bucket Capacities
0.75 m3-1.2 m3 (1.0 yd3-1.6 yd3)
Rated Bucket Capacity
1.31 yd³
Request a Demo Machine Comparison

Overview

The Cat 907M Compact Wheel Loader delivers high performance with outstanding versatility. On-the-go operator tuned hydraulics and drive train adjust the machine’s response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long.

Engine

+ -
Maximum Gross Power 73HP
Net Power 74HP
Maximum Gross Power - ISO 14396 73HP
Maximum Gross Power - SAE J1995 74HP
Emissions *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards.
Engine Model Cat� C3.3B DIT*
Maximum Gross Power - ISO 14396 (DIN) 74HP
Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269 74HP
Rated Net Power - 2,400 rpm - SAE J1349 73HP
Bore 3.7in
Displacement 201in³
Maximum Gross Torque - ISO 14396 192ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 191ft·lbf
Maximum Net Torque - SAE J1349 189ft·lbf
Note (1) Net power ratings are tested at the reference conditions for the specified standard.
Note (2) Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4) Flywheel per the SAE reference conditions with the fan at maximum speed.
Note (5) The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions.
Stroke 4.7in

Weights

+ -
Operating Weight 12677lb
Note Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow hydraulics and skid-steer coupler. � 907M is configured

Buckets

+ -
Bucket Capacities 0.75 m3-1.2 m3 (1.0 yd3-1.6 yd3)
General Purpose 1.31yd³
Light Material 1.57yd³

Operating Specifications

+ -
Rated Bucket Capacity 1.31yd³
Clearance - Full Lift and 45° Dump 7.97ft
Full Turn Tipping Load 7716lb
Reach - Full Lift and 45° Dump 2.6ft
Steering Articulation Angle - Each Direction 39�
Tipping Load - Full Turn - ISO 14397-1 7339lb
Tipping Load - Straight - ISO 14397-1 9007lb

Cab

+ -
ROPS SAE J1040 MAY94, ISO 3471-1994.
FOPS SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
Note (1) Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A

Loader Hydraulic System

+ -
Maximum Working Pressure - Implement Pump 3408psi
Relief Pressure - Tilt Cylinder Rod 2756psi
3rd Function Maximum Working Pressure 3408psi
Maximum Flow - Implement Pump 19gal/min
Maximum Flow - Implement Pump - Auxiliary Function High Flow 31gal/min
Maximum Flow - Implement Pump - Auxiliary Function Standard Flow 19gal/min
Relief Pressure - Tilt Cylinder Head 4496psi
Boost Flow Maximum Pressure 3191psi
Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height 3s
Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level 2.6s
Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift 9.6s
Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height 1.5s
Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level 2.6s
Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift 5.5s
Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time 9.6s
Lift Cylinder, Double Acting - Bore Diameter 3in
Lift Cylinder, Double Acting - Rod Diameter 2in
Lift Cylinder, Double Acting - Stroke 27.4in
Tilt Cylinder, Double Acting - Bore Diameter 3.5in
Tilt Cylinder, Double Acting - Rod Diameter 2.2in
Tilt Cylinder, Double Acting - Stroke 16.4in

Service Refill Capacities

+ -
Cooling System 4.5gal (US)
Engine Crankcase 3gal (US)
Fuel Tank 20.6gal (US)
Hydraulic System - Including Tank 18.5gal (US)
Axles - Front N/A
Axles - Rear N/A
Hydraulic Tank 12.2gal (US)
Transmission - Gear Box 2.2gal (US)

Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler

+ -
Articulation Angle 39�
Clearance - Bucket at 45° * 8.08ft
Clearance - Level Bucket** 9.92ft
Departure Angle 33�
Dig Depth** 3.7in
Dump Angle at Full Lift 45�
Height - Bucket Pin** 10.58ft
Height - Ground Clearance** 11in
Height - Ground to Cab** 8.42ft
Length - Overall* 17.92ft
Length - Wheel Base 7.08ft
Machine Width 6ft
Note (1) *Vary with bucket.
Note (2) **Vary with tire.
Note (3) Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Operating Weight 12913lb
Reach - Bucket at 45°* 2.33ft
Turning Radius - Inside of Tires 7.33ft
Turning Radius - Over Bucket 14.67ft
Width - Bucket 6.67ft
Width - Tread Center 4.58ft

Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler

+ -
Articulation Angle 39�
Clearance - Bucket at 45° * 7.67ft
Clearance - Level Bucket** 9.92ft
Departure Angle 33�
Dig Depth** 4.2in
Dump Angle at Full Lift 45�
Height - Bucket Pin** 10.58ft
Height - Ground Clearance** 11in
Height - Ground to Cab** 8.42ft
Length - Overall* 18.42ft
Length - Wheel Base 7.08ft
Machine Width 6ft
Note (1) *Vary with bucket.
Note (2) **Vary with tire.
Note (3) Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Operating Weight 12913lb
Reach - Bucket at 45°* 2.67ft
Turning Radius - Inside of Tires 7.33ft
Turning Radius - Over Bucket 14.67ft
Width - Bucket 6.67ft
Width - Tread Center 4.58ft

Drive Train

+ -
Forward - High Range 22mile/h
Forward - Range 1 6mile/h
Forward - Range 2 12mile/h
Reverse - High Range 22mile/h
Reverse - Range 1 6mile/h
Reverse - Range 2 12mile/h

Steering

+ -
Maximum Steering Torque - 0° (Straight Machine) 37155ft·lbf
Maximum Steering Torque - 39° (Full Turn) 27747ft·lbf
Maximum Working Pressure - Steering Pump 3191psi
Nominal Flow - Steering Pump 12gal/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left <6 turns
Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm 3s
Steering Articulation Angle - Each Direction 39�
Steering Cylinder, Double Acting - Bore Diameter 3.1in
Steering Cylinder, Double Acting - Rod Diameter 1.4in
Steering Cylinder, Double Acting - Stroke 11.8in

Tires

+ -
Note (1) *Standard tire.
Note (2) Other tire choices available, contact your Cat dealer for details.
Note (3) In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
Note (4) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Option (1) 335/80 R18 XZSL Michelin
Option (2) 340/80 R18 AT-R Firestone
Option (3) 340/80 R18 XMCL Michelin
Option (4) 340/80 R18 TRI2 Nokian
Option (5) 340/80 R18 Bibload Michelin
Option (6) 405/70 R18 SPT9 Dunlop*
Option (7) 12.5/80 R18 Flexport�