View Details

Tap to Call

910 Compact Wheel Loader

910 Compact Wheel Loader

At a Glance

Maximum Gross Power
110 HP
Operating Weight
18102 lb
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
Request a Demo Machine Comparison


The Cat® 910 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.


+ -
Maximum Gross Power 110HP
Rated Net Power - Rated Engine Speed 2200r/min
Maximum Gross Power - Rated Engine Speed 1800r/min
Rated Net Power - SAE J1349 99HP
Maximum Gross Power - ISO 14396 (metric) 112HP
Rated Net Power - ISO 9249 98HP
Maximum Gross Torque - SAE J1995 335ft·lbf
Maximum Gross Torque - ISO 14396 332ft·lbf
Maximum Net Torque - SAE J1349 329ft·lbf
Maximum Net Torque - ISO 9249 327ft·lbf
Displacement 220in³
Bore 3.85in
Stroke 4.72in
Engine Model Cat C3.6
Emissions Engine meets Tier 4 Final/Stage V emission standards.
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396 110HP


+ -
Operating Weight 18102lb


+ -
Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³)


+ -
Recyclability 95%


+ -
ROPS ISO 3471:2008
FOPS ISO 3449:2005
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4) *The measurements were conducted with the cab doors and windows closed.

Service Refill Capacities

+ -
Cooling System 5.7gal (US)
Fuel Tank 43.6gal (US)
Hydraulic Tank 14.5gal (US)
Transmission 0.8gal (US)
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Front Center Differential 2gal (US)
Axles - Rear Center Differential 2gal (US)
Diesel Exhaust Fluid (DEF) Tank 4.8gal (US)
Engine Crankcase 2.6gal (US)
Hydraulic System - Including Tank 25.9gal (US)


+ -
Maximum Working Pressure - Steering Pump 2683psi
Steering Articulation Angle - Each Direction 40°
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 3.2s
Maximum Flow - Steering Pump 17gal/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75turns

Loader Hydraulic System

+ -
Hydraulic Cycle Time - Dump, at Maximum Reach 1.4s
Hydraulic Cycle Time - Total Cycle Time 12.5s
Maximum Working Pressure - Implement Pump 3408psi
Relief Pressure - Tilt Cylinder 4931psi
Hydraulic Cycle Time - Rackback 2.2s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046psi
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2s
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046psi
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow 24gal/min
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7s
Maximum Flow - Implement Pump 32gal/min


+ -
Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3 25mile/h
Forward and Reverse - Speed Range 2* 12.5mile/h
Forward and Reverse - Speed Range 1* 6.3mile/h


+ -
Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Standard Size 15.5 R25 L2 XTLA
Other Choices Include 17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1) Other tire choices are available. Contact your Cat dealer for details.


+ -
Front Fixed; Locking differential (standard)
Rear Oscillating ±11 degrees; Locking differential (Standard)