Menu
x
View Details

Tap to Call Find a Sales Rep

910M Compact Wheel Loader

910M Compact Wheel Loader

At a Glance

Maximum Gross Power
100 HP
Operating Weight
17893 lb
Bucket Capacities
1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)
Rated Bucket Capacity
2.5 yd³
Request a Demo Machine Comparison

Overview

Engine

+ -
Maximum Gross Power 100HP
Net Power 97HP
Maximum Gross Power - ISO 14396 100HP
Maximum Gross Power - SAE J1995 102HP
Rated Net Power - SAE J1349 96HP
Rated Net Power - ISO 9249 97HP
Rated Net Power - ISO 9249 (DIN) 98HP
Maximum Gross Torque - SAE J1995 336ft·lbf
Maximum Net Torque - ISO 9249 329ft·lbf
Engine Model Cat C4.4 ACERT�
Maximum Gross Power - ISO 14396 (DIN) 101HP
Maximum Gross Power - Maximum Engine Speed 2350r/min
Rated Net Power - Rated Engine Speed 2200r/min
Bore 4.13in
Displacement 268in³
Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396 332ft·lbf
Maximum Net Torque - SAE J1349 325ft·lbf
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Stroke 5in

Weights

+ -
Operating Weight 17893lb

Buckets

+ -
Bucket Capacities 1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)

Operating Specifications

+ -
Rated Bucket Capacity 2.5yd³

Cab

+ -
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4) *The measurements were conducted with the cab doors and windows closed.
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).

Service Refill Capacities

+ -
Cooling System 5.7gal (US)
Fuel Tank 40.7gal (US)
Axles - Front Center Differential 2gal (US)
Axles - Rear Center Differential 2gal (US)
Diesel Exhaust Fluid (DEF) Tank 5gal (US)
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Engine Crankcase 2.3gal (US)
Hydraulic System - Including Tank 25.9gal (US)
Hydraulic Tank 14.5gal (US)
Transmission 0.9gal (US)

Steering

+ -
Steering Articulation Angle - Each Direction 40°
Maximum Flow - Steering Pump 17gal/min
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 3.2s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75turns
Maximum Working Pressure - Steering Pump 2683psi

Loader Hydraulic System

+ -
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow 24gal/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24gal/min
Relief Pressure - Tilt Cylinder 4931psi
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046psi
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046psi
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2s
Hydraulic Cycle Time - Dump, at Maximum Reach 1.4s
Hydraulic Cycle Time - Rackback 2.2s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7s
Hydraulic Cycle Time - Total Cycle Time 12.5s
Maximum Flow - Implement Pump 32gal/min
Maximum Working Pressure - Implement Pump 3408psi

Transmission

+ -
Forward and Reverse - Low Range, Speed Range 1* 6.3mile/h
Forward and Reverse - Low Range, Speed Range 2* 12.5mile/h
Forward and Reverse - High Range 25mile/h
Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Tires

+ -
Standard Size 15.5-25 12PR
Other Choices Include 15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Note (2) In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Axles

+ -
Front Fixed; Locking differential (standard)
Rear Oscillating �11 degrees; Locking differential (Standard)