Menu
View Details

Tap to Call

914 Compact Wheel Loader

914 Compact Wheel Loader

At a Glance

Maximum Gross Power
110 HP
Operating Weight
19103 lb
Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)
ROPS
ISO 3471:2008
Request a Demo Machine Comparison

Overview

Engine

+ -
Maximum Gross Power 110HP
Maximum Net Torque - SAE J1349 329ft·lbf
Maximum Net Torque - ISO 9249 327ft·lbf
Engine Model Cat C3.6
Maximum Gross Torque - ISO 14396 332ft·lbf
Maximum Gross Power - ISO 14396 (DIN) 111HP
Rated Net Power - ISO 9249 98HP
Maximum Gross Power - Maximum Engine Speed 2350r/min
Emissions Engine meets Tier 4 Final/Stage V emission standards.
Rated Net Power - SAE J1349 99HP
Maximum Gross Power - ISO 14396 110HP
Maximum Gross Power - SAE J1995 111HP
Bore 3.86in
Rated Net Power - ISO 9249 (DIN) 99HP
Rated Net Power - Rated Engine Speed 2200r/min
Stroke 4.72in
Displacement 220in³
Maximum Gross Torque - SAE J1995 335ft·lbf
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Weights

+ -
Operating Weight 19103lb

Buckets

+ -
Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3)
Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³)

Cab

+ -
ROPS ISO 3471:2008
FOPS EN ISO 3449:2008 (ISO 3449:2005)
Note (4) *The measurements were conducted with the cab doors and windows closed.
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Service Refill Capacities

+ -
Cooling System 5.7gal (US)
Fuel Tank 43.6gal (US)
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential 2gal (US)
Hydraulic System - Including Tank 25.9gal (US)
Diesel Exhaust Fluid (DEF) Tank 4.8gal (US)
Engine Crankcase 2.6gal (US)
Hydraulic Tank 14.5gal (US)
Transmission 0.8gal (US)
Axles - Front Center Differential 2gal (US)

Steering

+ -
Maximum Flow - Steering Pump 22gal/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75turns
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8s
Maximum Working Pressure - Steering Pump 3263psi
Steering Articulation Angle - Each Direction 40°

Loader Hydraulic System

+ -
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046psi
Maximum Flow - Implement Pump 39gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24gal/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046psi
Hydraulic Cycle Time - Total Cycle Time 12.5s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24gal/min
Hydraulic Cycle Time - Dump, at Maximum Reach 1.4s
Relief Pressure - Tilt Cylinder 4931psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32gal/min
Maximum Working Pressure - Implement Pump 4061psi
Hydraulic Cycle Time - Rackback 2.2s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7s

Transmission

+ -
Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3 25mile/h
Forward and Reverse - Speed Range 1* 6.3mile/h
Forward and Reverse - Speed Range 2* 12.5mile/h

Tires

+ -
Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Standard Size 17.5 R25 L2 XTLA
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Axles

+ -
Rear Oscillating ±11 degrees; Locking differential (Standard)
Front Fixed; Locking differential (standard)