Menu
x
View Details

Tap to Call Find a Sales Rep

924K Wheel Loader

924K Wheel Loader

At a Glance

Rated Net Power
141.0 hp
Operating Weight
28360.0 lb
Bucket Capacities
1.9 m3 - 5.0 m3 2.5 yd3 - 6.5 yd3
Model
Cat® C6.6 ACERT™
Request a Demo Machine Comparison

Overview

The Cat® 924K Wheel Loader sets a new standard for productivity, fuel efficiency and comfort. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long. The new optimized Z-bar loader linkage delivers the performance and breakout forces of a traditional Z-bar linkage with the parallelism and load handling capability of a tool carrier. Experience the new industry benchmark.

Engine

+ -
Rated Net Power 141.0hp
Model Cat® C6.6 ACERT™
SAE J1349 141.0hp
ISO 9249 (1997) 142.0hp
EEC 80/1269 142.0hp
Bore 4.0in
Stroke 5.0in
Displacement 402.0in3
Net Torque 515.0ft-lb

Weights

+ -
Operating Weight 28360.0lb

Buckets

+ -
Bucket Capacities 1.9 m3 - 5.0 m3 2.5 yd3 - 6.5 yd3

Operating Specifications

+ -
Static Tipping Load (Full Turn) 16352.0lb
Reach - full lift/45 degree dump angle 3.25ft
Dump clearance - Full lift/45 degree dump angle 9.4ft
Articulation Angle 40.0Degrees

Tires

+ -
Size 20.5 R25 Radial (L-3)

Dimensions

+ -
Width over tires 8.33ft
Height to Top of ROPS/FOPS 10.9ft
Height to Center of Axle 2.2ft
Ground Clearance 1.25ft
Overall Length 24.4ft
Length - Rear Axle to Bumper 6.5ft
Center Line of Front Axle-Hitch 4.9ft
Wheel Base Length 9.8ft
Dump Clearance-Max Lift-45° 9.4ft
Bucket Pin Height at Max Lift 12.75ft
Overall Height - Bucket Raised 16.6ft
Reach at Max Lift and 45° Dump 3.3ft
Rack Back Angle at Max Lift 54.0Degrees
Dump Angle at Max Lift 50.0Degrees
Rack Back Angle at Carry 45.0Degrees
Carry Height 1.5ft
Digging Depth 3.8in

Steering

+ -
Steering Articulation 40.0Degrees
Steering angle, each direction 40.0Degrees
Steering cylinders, two, bore 2.8in
Maximum working pressure 3500.0psi

Loader Hydraulic System

+ -
Hydraulic Cycle Time 9.6Seconds
Pump flow - Implement pump 40.0gal/min
Maximum working pressure 3771.0psi
Hydraulic cycle time: 9.6 Seconds
Raise 5.5Seconds
Dump 1.5Seconds
Lower, empty, float down 2.6Seconds
Total 9.6Seconds
Bore 4.3in
Bore 5.1in
Stroke 28.7in
Stroke 21.9in

Transmission

+ -
Standard transmission max travel speeds: 25.0mph
Forward 1 8.0mph
2 8.0mph
2 8.0mph
3 17.0mph
3 17.0mph
4 25.0mph
4 25.0mph
Reverse 1 8.0mph

Service Refill Capacities

+ -
Fuel tank 51.5gal
Cooling system 7.9gal
Crankcase 5.3gal
Transmission 2.2gal
Front 5.5gal
Rear 5.5gal
Hydraulic system (including tank) 42.3gal
Hydraulic tank 23.8gal

Cab

+ -
ROPS SAE J1040 MAY94, ISO 3471-1994
FOPS SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II