Menu
x
View Details

Tap to Call Find a Sales Rep

926M Waste Handler Small Wheel Loader

926M Waste Handler Small Wheel Loader

At a Glance

Maximum Gross Power
153 HP
Operating Weight
31240 lb
Bucket Capacities
3.0-5.0 m3 (3.9-6.5 yd3)
Bore
4 in
Request a Demo Machine Comparison

Overview

The Cat 926M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Engine

+ -
Maximum Gross Power 153HP
Bore 4in
Stroke 5in
Displacement 427in³
Maximum Rated Gross Power - ISO 14396 153HP
Maximum Rated Gross Power - ISO 14396 (DIN) 155HP
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) 511ft·lbf
Engine Model Cat® C7.1 ACERT™
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance [HP+] Power Mode: Range 1-4) 155HP
Maximum Rated Gross Power - ISO 14396 (Performance [HP+] Power Mode: Range 1-4) 153HP
Maximum Rated Gross Power - Maximum Engine Speed (Performance [HP+] Power Mode: Range 1-4) 1800r/min
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) 149HP
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) 148HP
Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396 (Performance [HP+] Power Mode: Range 1-4) 531ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 531ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance [HP+] Power Mode: Range 1-4) 517ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*) 517ft·lbf
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) 511ft·lbf
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) 148HP
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 146HP
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600r/min
Note (1) *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4) Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 142HP
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 144HP
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 141HP
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) 151HP

Weights

+ -
Operating Weight 31240lb

Buckets

+ -
Bucket Capacities 3.0-5.0 m3 (3.9-6.5 yd3)

Cab

+ -
ROPS ISO 3471: 2008
FOPS ISO 3449: 2005 LEVEL II
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* 68dB(A)
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* 101dB(A)
Note (1) *Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows clo
Note (2) The Blue Angel environmental label is an optional attachment for Europe only.

Power Train

+ -
Front Axle - Traction Aid* Locking differential (standard)
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25 ± 13.5 degrees
Brakes - Parking Spring applied hydraulically released
Brakes - Service Inboard wet disc
Front Axle Fixed
Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2) Offset rims available to meet European roading requirements.
Note (3) *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Rear Axle Oscillating
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 ± 10.5 degrees
Rear Axle - Traction Aid - Optional Limited slip differential

Loader Hydraulic System

+ -
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) 1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) 2.6/2.6 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) 5.5/6.2 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time 9.6/10.5 seconds
Lift Cylinder, Double Acting - Bore Diameter 4.3in
Lift Cylinder, Double Acting - Rod Diameter 2.4in
Lift Cylinder, Double Acting - Stroke 28.7in
Maximum Flow - Implement Pump 40gal/min
Maximum Flow - Implement Pump - 3rd Function* 40gal/min
Maximum Working Pressure - Implement Pump 3771psi
Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Note (3) *3rd function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
Relief Pressure - Tilt Cylinder 4061psi
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3771psi
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure 4061psi
Tilt Cylinder, Double Acting - Bore Diameter 5.1in
Tilt Cylinder, Double Acting - Rod Diameter 2.8in
Tilt Cylinder, Double Acting - Stroke 21.9in

Operating Specifications

+ -
Full Turn Tip Load 16257lb

Service Refill Capacities

+ -
Cooling System 7.9gal (US)
Diesel Exhaust Fluid (DEF) Tank 5gal (US)
Engine Crankcase 5.3gal (US)
Front Axles 5.5gal (US)
Fuel Tank 51.5gal (US)
Hydraulic System - Including Tank 42.3gal (US)
Hydraulic Tank 23.8gal (US)
Rear Axles 5.5gal (US)
Transmission - Gear Box 2.2gal (US)

Steering

+ -
Maximum Flow - Steering Pump 34gal/min
Maximum Steering Torque - 0° (Straight Machine) 37155ft·lbf
Maximum Steering Torque - 40° (Full Turn) 27747ft·lbf
Maximum Working Pressure - Steering Pump 3500psi
Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4s
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8s
Steering Cylinder, Double Acting - Bore Diameter 2.8in
Steering Cylinder, Double Acting - Rod Diameter 1.6in
Steering Cylinder, Double Acting - Stroke 17.2in

Transmission

+ -
Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2 8mile/h
Forward and Reverse - Range 3 17mile/h
Forward and Reverse - Range 4 25mile/h
Note *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).