Menu
View Details

Tap to Call

930M Ag Handler Small Wheel Loader

930M Ag Handler Small Wheel Loader

At a Glance

Maximum Gross Power
168 HP
Operating Weight
31382 lb
Bucket Capacities
2.1-5.0 m³ (2.7-6.5 yd³)
ROPS
ISO 3471:2008
Request a Demo Machine Comparison

Overview

The Cat® 930M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A power boost in Range 1 for silage work maximizes productivity, while a boost in Range 4 gets you to the farm or field faster. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Engine

+ -
Maximum Gross Power 168HP
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800r/min
Engine Model Cat® C7.1
Displacement (Performance Power Mode: Speed Range 1-4) 428in³
Emissions Engine meets U.S. EPA Tier 4 Final emission standards.
Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) 170HP
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 168HP
Note (1) *The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Note (2) **Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (3) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Rated Gross Power - ISO 14396 168HP
Maximum Rated Gross Power - ISO 14396 (metric) 170mhp
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**) 156HP
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**) 1600r/min
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**) 158HP
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**) 160HP
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**) 162HP
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 601ft·lbf
Stroke - Performance Power Mode: Range 1-4 5.3in
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) 797N·m
Note (4) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Bore (Standard Power Mode: Range 1-4) 4.1in
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**) 156HP
Stroke (Standard Power Mode: Range 1-3**) 5.3in
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) 166HP
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 164HP
Bore (Standard Power Mode: Range 1-3**) 4.1in
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) 587ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**) 795N·m
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**) 776N·m
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 163HP
Displacement (Standard Power Mode: Range 1-3**) 428in³
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**) 573ft·lbf

Weights

+ -
Operating Weight 31382lb

Buckets

+ -
Bucket Capacities 2.1-5.0 m³ (2.7-6.5 yd³)
Bucket Capacities - Light Material 3.1-5.0 m³ (4.0-6.5 yd³)

Cab

+ -
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Note (1) *The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* 101dB(A)
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* 68dB(A)

Dimensions with Bucket - Standard Lift

+ -
Dump Angle at Full Lift 48°
Note (1) *Vary with bucket.
Note (3) Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Height - Ground to Cab** 10.9ft
Articulation Angle 40°
Height - Ground to Beacon** 12.2ft
Length - Hitch to Front Axle 4.9ft
Clearance - Load over Height** 10.9ft
Length - Overall* 24.9ft
Reach - Bucket at 45°* 3.6ft
Turning Radius - Inside of Tires 9.4ft
Width - Tread Center 6.3ft
Operating Weight 31125lb
Height - Bucket Pin** 12.8ft
Height - Ground to Axle Center** 2.25ft
Width - Bucket 8.4ft
Rack Angle at Full Lift 54°
Height - Overall** 17.1ft
Clearance - Bucket at 45°* 9.1ft
Clearance - Level Bucket** 11.75ft
Turning Radius - Outside of Tires 17.7ft
Dig Depth** 3.9in
Note (2) **Vary with tire.
Carry Height - Bucket Pin 1.3ft
Width - Over Tires 8.3ft
Turning Radius - Over Bucket 19.5ft
Length - Wheel Base 9.8ft
Length - Rear Axle to Bumper 6.5ft
Departure Angle 33°
Rack Angle at Carry 43°
Height - Ground Clearance** 1.3ft

Dimensions with Bucket - High Lift

+ -
Height - Ground Clearance** 1.3ft
Articulation Angle 40°
Operating Weight 31441lb
Dig Depth** 5.3in
Note (3) Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Width - Over Tires 8.3ft
Turning Radius - Inside of Tires 9.4ft
Clearance - Level Bucket** 13.4ft
Height - Ground to Cab** 10.9ft
Note (2) **Vary with tire.
Length - Overall* 27ft
Rack Angle at Carry 47°
Turning Radius - Over Bucket 20.6ft
Rack Angle at Full Lift 51°
Turning Radius - Outside of Tires 17.7ft
Clearance - Load over Height** 11.6ft
Carry Height - Bucket Pin 1.9ft
Height - Ground to Beacon** 12.2ft
Height - Bucket Pin** 14.4ft
Clearance - Bucket at 45°* 10.7ft
Height - Ground to Axle Center** 2.25ft
Note (1) *Vary with bucket.
Length - Hitch to Front Axle 4.9ft
Width - Tread Center 6.3ft
Length - Wheel Base 9.8ft
Width - Bucket 8.4ft
Dump Angle at Full Lift 48°
Reach - Bucket at 45°* 4.4ft
Height - Overall** 18.7ft
Departure Angle 33°
Length - Rear Axle to Bumper 6.5ft

Axles

+ -
Front Fixed; Locking differential (standard)
Rear Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Transmission

+ -
Reverse - Range 1* 8mile/h
Note Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine
Forward - Range 2 8mile/h
Forward - Range 1* 1-13 km/h (0.6-8 mph)
Reverse - Range 4 25mile/h
Reverse - Range 2 8mile/h
Forward - Range 3 17mile/h
Forward - Range 4 25mile/h
Reverse - Range 3 17mile/h

Steering

+ -
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4s
Maximum Flow - Steering Pump 34gal/min
Maximum Working Pressure - Steering Pump 3500psi
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.5turns
Steering Articulation Angle - Each Direction 40°
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cylinder, Double Acting - Bore Diameter 2.8in
Steering Cylinder, Double Acting - Stroke 17.2in
Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8s
Steering Cylinder, Double Acting - Rod Diameter 1.6in

Loader Hydraulic System

+ -
Maximum Flow - Implement Pump 50gal/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow* 42gal/min
Maximum Working Pressure - Implement Pump 4061psi
Note *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
Relief Pressure - Tilt Cylinder 4351psi
Cycle Times - 1,600 rpm - Standard: Total Cycle Time 10.1s
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height) 1.5s
Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time 9.3s
Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level) 2.7s
Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift) 5.1s
Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level) 2.7s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure 4061psi
Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height) 1.7s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure 4351psi
Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift) 5.7s
Maximum Flow - Implement Pump - 3rd Function Maximum Flow* 50gal/min
Lift Cylinder: Standard Lift Linkage - Bore Diameter 4.3in
Tilt Cylinder: Standard Lift Linkage - Stroke 21.9in
Tilt Cylinder: Standard Lift Linkage - Rod Diameter 2.8in
Lift Cylinder: Standard Lift Linkage - Rod Diameter 2.4in
Tilt Cylinder: Standard Lift Linkage - Bore Diameter 5.1in
Lift Cylinder: Standard Lift Linkage - Stroke 28.7in

Operating Specifications

+ -
Full Turn Tip Load 19424lb

Service Refill Capacities

+ -
Axles - Front 6.9gal (US)
Axles - Rear 6.6gal (US)
Cooling System 7.9gal (US)
Diesel Exhaust Fluid (DEF) Tank 5gal (US)
Engine Crankcase 5.3gal (US)
Fuel Tank 51.5gal (US)
Hydraulic System - Including Tank 43.6gal (US)
Hydraulic Tank 23.8gal (US)
Transmission - Gear Box 2.2gal (US)

Tires

+ -
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Note (2) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include 20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX
Standard Size 20.5 R25, radial (L-3)

Power Train

+ -
Note *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).
Rear Axle Oscillating
Note (2) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Front Axle Fixed
Front Axle - Traction Aid* Locking differential standard
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25 ± 10.5 degrees
Brakes - Service Inboard wet disc
Rear Axle - Traction Aid Limited slip differential optional
Brakes - Parking Spring applied hydraulically released
Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65 ± 7 degrees

Air Conditioning System

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.