930M Waste Handler Small Wheel Loader
Overview
The Cat® 930M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.
Engine
+
-
| Maximum Gross Power |
168HP |
| Bore |
4in |
| Stroke |
5in |
| Displacement |
427in³ |
| Engine Model |
Cat® C7.1 |
| Emissions |
The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards. |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) |
586ft·lbf |
| Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) |
588ft·lbf |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) |
573ft·lbf |
| Note (1) |
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
| Note (2) |
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
| Note (3) |
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) |
168HP |
| Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) |
1800r/min |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) |
601ft·lbf |
| Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) |
1600r/min |
| Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) |
160HP |
| Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) |
572ft·lbf |
| Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) |
587ft·lbf |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) |
166HP |
| Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) |
170HP |
| Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) |
163HP |
| Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) |
164HP |
| Engine Power - ISO 14396 - Metric |
170HP |
| Engine Power - ISO 14396 |
168HP |
| Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) |
162HP |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
158HP |
| Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
156HP |
| Net Power (Standard Power Mode: Range 1-3*) |
1600r/min |
| Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
156HP |
| Net Power (Performance Power Mode: Range 1-4) |
1800r/min |
Weights
+
-
| Operating Weight |
37713lb |
| Note (2) |
^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires. |
| Note (1) |
**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires. |
| Operating Weight (1) |
15 381 kg (33,908 lb)** |
| Operating Weight (2) |
17 107 kg (37,713 lb)^ |
Buckets
+
-
| Bucket Capacities |
3.0-5.0 m3 (3.9-6.5 yd3) |
Cab
+
-
| ROPS |
ISO 3471:2008 |
| FOPS |
ISO 3449:2005 LEVEL II |
| Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* |
101dB(A) |
| Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* |
68dB(A) |
| Note (1) |
* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl |
Loader Hydraulic System
+
-
| Relief Pressure - Tilt Cylinder |
4061psi |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) |
1.5/1.7 seconds |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) |
2.7/2.7 seconds |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) |
5.1/5.7 seconds |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time |
9.3/10.1 seconds |
| Maximum Flow - Implement Pump |
50gal/min |
| Maximum Working Pressure - Implement Pump |
3771psi |
| Note (1) |
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. |
| Note (2) |
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
| Note (3) |
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped. |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure |
4061psi |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* |
42gal/min |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure |
4061psi |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* |
50gal/min |
| Lift Cylinder: Standard Lift Linkage - Stroke |
28.7in |
| Tilt Cylinder: Standard Lift Linkage - Bore Diameter |
5.9in |
| Lift Cylinder: Standard Lift Linkage - Bore Diameter |
4.7in |
| Lift Cylinder: Standard Lift Linkage - Rod Diameter |
2.6in |
| Tilt Cylinder: Standard Lift Linkage - Rod Diameter |
3.5in |
| Tilt Cylinder: Standard Lift Linkage - Stroke |
21.9in |
Power Train
+
-
| Brakes - Parking |
Spring applied hydraulically released |
| Brakes - Service |
Inboard wet disc |
| Front Axle |
Fixed |
| Note (1) |
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. |
| Note (2) |
Offset rims available to meet European roading requirements. |
| Note (3) |
Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M. |
| Rear Axle |
Oscillating |
| Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 |
± 10.5 degrees |
| Rear Axle - Traction Aid - Optional |
Limited slip differential |
| Front Axle - Traction Aid |
Locking differential |
| Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder |
± 7 degrees |
Service Refill Capacities
+
-
| Cooling System |
7.9gal (US) |
| Engine Crankcase |
5.3gal (US) |
| Fuel Tank |
51.5gal (US) |
| Hydraulic System - Including Tank |
43.6gal (US) |
| Hydraulic Tank |
23.8gal (US) |
| Transmission - Gear Box |
2.2gal (US) |
| Axles - Rear |
6.6gal (US) |
| Diesel Exhaust Fluid (DEF) Tank |
5gal (US) |
| Axles - Front |
6.9gal (US) |
Steering
+
-
| Maximum Flow - Steering Pump |
34gal/min |
| Maximum Steering Torque - 0° (Straight Machine) |
37155ft·lbf |
| Maximum Steering Torque - 40° (Full Turn) |
27747ft·lbf |
| Maximum Working Pressure - Steering Pump |
3500psi |
| Note (1) |
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. |
| Note (2) |
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
| Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed |
2.4s |
| Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited |
2.8s |
| Steering Cylinder, Double Acting - Bore Diameter |
2.8in |
| Steering Cylinder, Double Acting - Rod Diameter |
1.6in |
| Steering Cylinder, Double Acting - Stroke |
17.2in |
Transmission
+
-
| Forward and Reverse - Range 1* |
1-13 km/h (0.6-8 mph) |
| Forward and Reverse - Range 2 |
8mile/h |
| Forward and Reverse - Range 3 |
17mile/h |
| Forward and Reverse - Range 4 |
25mile/h |
| Note |
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph). |
Operating Specifications
+
-
| Note (2) |
^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires. |
| Note (1) |
**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires. |
| Full Turn Tip Load (2) |
9525 kg (20,998 lb)^ |
| Full Turn Tip Load (1) |
8573 kg (18,900 lb)** |
Air Conditioning System
+
-
| Air Conditioning |
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
Standard Equipment:
Power Train
+
-
-
Axle Duo-Cone™ seal guards
-
Auto idle shut down feature
-
Cat C7.1 engine
– Power modes (Standard and Performance)
– Power by range (High Power in Range 4)
– Turbocharged and aftercooled
– Diesel particulate filter (Fit for Life)
-
Coded start (requires secondary display)
-
Differential lock in front axle
-
Enclosed wet disc full hydraulic brakes
-
Hydraulically driven demand cooling fan
-
Hydrostatic transmission with electronic control
– Operator modes (Default, TC, Hystat, and Ice)
– Directional Shift Aggressiveness (fast, medium, slow)
– Rimpull control, adjust wheel torque
– Creeper control, adjust ground speed
-
Parking brake, electric
-
Single plane cooling package wide six fins per inch density
-
Oil sampling ports
-
Throttle lock and max speed limiter
Hydraulics
+
-
-
Automatic lift lower and tilt kickouts, adjustable in-cab
-
Bucket and fork modes, adjustable in-cab
-
Cylinder damping at kickout and mechanical end stops
-
Fine mode control (fast, medium, slow)
-
Hydraulic response setting (fast, medium, slow)
-
Load sensing hydraulics and steering
-
Seat-mounted hydraulic joystick controls
Electrical
+
-
-
Alternator, 115 amp, heavy duty
-
Batteries, 1,000 CCA (2) 24V system, disconnect switch
-
Back-up alarm
-
Emergency shutdown switch
-
Halogen work and roading lights, LED rear tail lights
-
Product Link PRO with three year subscription
-
Remote jump start post
-
Resettable main and critical function breakers
Operator Environment
+
-
-
75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
-
Automatic temperature control
-
Cab, pressurized
-
Camera, rearview
-
External heated mirrors with lower parabolic
-
Ground level cab door release
-
Hydraulic control lockout
-
Mirror, single
-
Lunch box storage
-
Radio ready speakers
-
Rear window defrost, electric
-
Column mounted multi function control – lights, wipers, turn signal
-
Tilt and telescopic steering wheel
-
Tinted front glass
-
Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
-
Suspension seat, fabric
Other Standard Equipment
+
-
-
Large-access enclosure doors with adjustable close/open force
-
Cat optimized Z-bar linkage with parallel lift
-
Recovery hitch, with pin
-
Remote mounted lubrication points
-
Lockable compartments and enclosures
Optional Equipment:
Optional Equipment
+
-
Autolube, integrated in secondary display
Auxiliary flow, third and fourth function
Differential, limited slip, rear
Beacon light, strobe
Cab, deluxe (standard in Europe)
– Camera, rearview integrated into advanced display
– Electrically adjustable external heated mirrors (2)
– Secondary display to enable features and adjust parameters
– LED interior lighting
– Sunscreen, front and rear
– Touchscreen secondary display
– Ride control adjustable speed activation
– Preventative maintenance reminders
– Integrated help function (26 languages)
Camera, roof mounted, front view with separate display
Cold start package
– Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
Counterweight, additional options
Coupler, (Fusion and ISO 23727)
Debris packages (low, medium, high)
Fenders (extended cover and full coverage)
Guarding packages
Linkage, high lift
Lights, auxiliary, halogen or LED with engine and DEF compartment lights
Payload Technology
– Cat Production Measurement (CPM)
– CPM Printer
Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
Radio packages
Rear Object Detection
Ride Control System, adjustable through secondary display
Seats
– Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
– Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
Steering
– Dual mode and secondary
Tire Pressure Monitoring (TPM)
