Menu
View Details

Tap to Call

950M Wheel Loader

950M Wheel Loader

At a Glance

Operating Weight
42357 lb
Operating Weight
42357 lb
Bucket Capacities
2.5-9.2 m? (3.3-12.0 yd?)
Engine Model
Cat C7.1 ACERT
Request a Demo Machine Comparison

Overview

The new 950M Wheel Loader has a U.S. EPA Tier 4 Final/EU Stage IV ACERT™ engine equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically lets us meet our customer’s high expectations for productivity, fuel efficiency, reliability and service life. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to operators. M Series Loaders are 10% more fuel efficient than the K Series Loaders and up to 25% more efficient than the H Series Loaders they replace. (Fuel efficiency is measured in mass of material moved per volume of fuel burned. Average efficiency improvement as tested and analyzed for an average composite cycle and stand configuration with variations per comparable model with and without economy mode active. Factors influence result variation such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.) Optional configurations are available. (Optional configuration and equipment may vary from region to region. Consult your Caterpillar representative for further details.)

Weights

+ -
Operating Weight 42357lb
Operating Weight 42357lb
Note Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering,
Note Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering,

Buckets

+ -
Bucket Capacities 2.5-9.2 m? (3.3-12.0 yd?)

Engine

+ -
Engine Model Cat C7.1 ACERT
Engine Model Cat C7.1 ACERT
Displacement 428in3
Displacement 428in³
Net Power – ISO 9249 230hp
Max Gross Power @ 2,100 rpm – SAE J1995 250hp
Max Gross Power @ 2,100 rpm – ISO 14396 249hp
Maximum Gross Power - 2,100 rpm - SAE J1995 250HP
Maximum Gross Power - 2,100 rpm - ISO 14396 - Metric 253HP
Maximum Net Power - 2,100 rpm - SAE J1349 230HP
Max Net Power @ 2,100 rpm – ISO 9249 (metric) 232hp
Peak Gross Torque (1,300 rpm) – SAE J1995 911lbf-ft
Peak Gross Torque - 1,300 rpm - SAE J1995 911ft·lbf
Maximum Net Torque (1,300 rpm) 858lbf-ft
Maximum Gross Power - 2,100 rpm - ISO 14396 249HP
Maximum Net Power - 2,100 rpm - ISO 9249 230HP
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric 232HP
Net Power - ISO 9249 230HP
Peak Gross Torque - 1,300 rpm - ISO 14396 908ft·lbf
Maximum Net Torque - 1,300 rpm 858ft·lbf

Transmission

+ -
Forward 1 4.3mph
Forward - 1 4.3mT/hr
Forward 2 7.5mph
Forward - 2 7.5mT/hr
Forward 3 12.0mph
Forward - 3 12mT/hr
Forward 4 16.0mph
Forward - 4 16mT/hr
Reverse 1 4.3mph
Reverse - 1 4.3mT/hr
Reverse 2 7.5mph
Reverse - 2 7.5mT/hr
Reverse 3 16.0mph
Reverse - 3 16mT/hr
Forward 5 24.5mph
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Forward - 5 24.5mT/hr
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.

Operating Specifications

+ -
Breakout Force 40690lbf
Breakout Force 40690lbf
Static Tipping Load - Full 40° Turn - No Tire Deflection 25926lb
Static Tipping Load - Full 40° Turn - With Tire Deflection 24262lb
Note For a machine configuration as defined under “Weight.”
Note Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Note (1) For a machine configuration as defined under ?Weight.?
Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Bucket Capacities

+ -
Bucket Range 2.5-9.2 m? (3.3-12.0 yd?)
Bucket Range 2.5-9.2 m³ (3.3-12.0 yd³)

Hydraulic System

+ -
Hydraulic Cycle Time – Total 8.9Seconds
Implement Pump Type Variable Axial Piston
Implement System - Maximum Pump Output at 2,150 rpm 76gal/min
Implement System - Maximum Operating Pressure 4250psi
Hydraulic Cycle Time - Total 8.9s

Service Refill Capacities

+ -
Cooling System 15.6gal
Crankcase 5.8gal
Transmission 11.4gal
Differentials and Final Drives – Front 11.4gal
Differentials and Final Drives – Rear 11.4gal
Hydraulic Tank 33.0gal
DEF Tank 4.2gal
Fuel Tank 72.6gal
Cooling System 15.6gal (US)
Crankcase 5.8gal (US)
DEF Tank 4.2gal (US)
Differential - Final Drives - Front 11.4gal (US)
Differential - Final Drives - Rear 11.4gal (US)
Fuel Tank 72.6gal (US)
Hydraulic Tank 33gal (US)
Transmission 11.4gal (US)

Sound

+ -
With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008) 70dB(A)
With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008) 108dB(A)
With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013) 75 dB(A)*
Note *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value: Operator Sound Pressure Level (ISO 6396:2008) 69dB(A)
With Cooling Fan Speed at 70% of Maximum Value: Exterior Sound Power Level (ISO 6395:2008) 106 LWA**
Note **European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 108dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 75 dB(A)*
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 70dB(A)
Note (1) *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2) **European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 106 LWA**
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 69dB(A)

Dimensions – Standard Lift

+ -
Height to Top of Hood 8.83ft
Height to Top of Exhaust Pipe 11.17ft
Height to Top of ROPS 11.33ft
Ground Clearance 1.17ft
Center Line of Rear Axle to Edge of Counterweight 6.33ft
Center Line of Rear Axle to Hitch 5.50ft
Wheelbase 11.00ft
Overall Length (without bucket) 22.67ft
Hinge Pin Height at Carry Height 2.08ft
Hinge Pin Height at Maximum Lift 13.25ft
Lift Arm Clearance at Maximum Lift 10.75ft
Rack Back at Maximum Lift 59 degrees
Rack Back at Carry Height 49 degrees
Rack Back at Ground 36 degrees
Maximum Width over Tires (loaded) 9.25ft
Tread Width 7.00ft
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Dimensions – High Lift

+ -
Height to Top of Hood 8.83ft
Height to Top of Exhaust Pipe 11.17ft
Height to Top of ROPS 11.33ft
Ground Clearance 1.17ft
Center Line of Rear Axle to Edge of Counterweight 6.33ft
Center Line of Rear Axle to Hitch 5.50ft
Wheelbase 11.00ft
Overall Length (without bucket) 24.58ft
Hinge Pin Height at Carry Height 2.58ft
Hinge Pin Height at Maximum Lift 14.83ft
Lift Arm Clearance at Maximum Lift 11.92ft
Rack Back at Maximum Lift 59 degrees
Rack Back at Carry Height 49 degrees
Rack Back at Ground 40 degrees
Maximum Width over Tires (loaded) 9.25ft
Tread Width 7.00ft
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Dimensions - High Lift

+ -
Centerline of Rear Axle to Edge of Counterweight 6.33ft
Centerline of Rear Axle to Hitch 5.5ft
Ground Clearance 1.17ft
Height - Top of Exhaust Pipe 11.17ft
Height - Top of Hood 8.83ft
Height - Top of ROPS 11.33ft
Hinge Pin Height at Carry Height 2.58ft
Hinge Pin Height at Maximum Lift 14.83ft
Lift Arm Clearance at Maximum Lift 11.92ft
Maximum Width - Over Tires - Loaded 9.25ft
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length - Without Bucket 24.58ft
Rack Back - Carry Height 49 degrees
Rack Back - Maximum Lift 59 degrees
Rack Back at Ground 40 degrees
Tread Width 7ft
Wheel Base 11ft

Dimensions - Standard Lift

+ -
Centerline of Rear Axle to Edge of Counterweight 6.33ft
Centerline of Rear Axle to Hitch 5.5ft
Ground Clearance 1.17ft
Height - Top of Exhaust Pipe 11.17ft
Height - Top of Hood 8.83ft
Height - Top of ROPS 11.33ft
Hinge Pin Height at Carry Height 2.08ft
Hinge Pin Height at Maximum Lift 13.25ft
Lift Arm Clearance at Maximum Lift 10.75ft
Maximum Width - Over Tires - Loaded 9.25ft
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length - Without Bucket 22.67ft
Rack Back - Carry Height 49 degrees
Rack Back - Maximum Lift 59 degrees
Rack Back at Ground 36 degrees
Tread Width 7ft
Wheel Base 11ft