Menu
x
View Details

Tap to Call Find a Sales Rep

992K Wheel Loader

992K Wheel Loader

At a Glance

Net Power
814 HP
Operating Weight
220089 lb
Bucket Capacities
10.7-12.3 m3 (14-16 yd3)
Engine Model
Cat® C32 ACERT™
Request a Demo Machine Comparison

Overview

Caterpillar first introduced the 992 in 1968. This large wheel loader has been a global leader ever since, building a reputation as a face loader that’s both safe to operate, productive and durable. With the introduction of the K Series, we’ve enhanced the operator’s experience and the safety of those working on and around the machine. With both standard and high lift configurations, this machine will pass match with fleets of 775, 777, and 785 trucks. If your operations revolve around the 992 as a loading tool, you’ll find everything that’s important to your business in the 992K; safety, productivity, cost control and comfort for your people.

Engine

+ -
Net Power 814HP
Engine Model Cat® C32 ACERT™
Bore 5.7in
Stroke 6.4in
Displacement 1963.5in³
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 900HP
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1995 814HP
Emissions (U.S. EPA Tier 4 Final): Peak Torque at 1,200 rpm - SAE J1995 4765r/min
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 907HP
Emissions (Tier 2 Equivalent): Net Power - SAE J1349 814HP
Emissions (Tier 2 Equivalent): Gross Power - ISO 14396 884HP
Emissions (Tier 2 Equivalent): Rated Speed 1750r/min
Emissions (Tier 2 Equivalent): Net Power - SAE J1995 814HP
Emissions (Tier 2 Equivalent): Peak Torque at 1,200 rpm - SAE J1995 4796r/min
Note (Tier 4 Final) (1) These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 4 Final) (2) Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Note (Tier 2 Equivalent) (1) These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 2 Equivalent) (2) Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1349 814HP
Emissions (U.S. EPA Tier 4 Final): Rated Speed 1750r/min
Emissions (U.S. EPA Tier 4 Final): Gross Power - ISO 14396 884HP
Torque Rise 30%

Operating Specifications

+ -
Operating Weight 220089lb
Bucket Capacity Range 10.7-12.3 m3 (14-16 yd3)
Rated Payload - High Lift (Face Material) 21t
Rated Payload - Standard (Face Material) 24t
Operating Weight - High Lift 221847lb
Operating Weight - Standard 220089lb

Buckets

+ -
Bucket Capacities 10.7-12.3 m3 (14-16 yd3)

Transmission

+ -
Transmission Type Cat Planetary Power Shift
Forward - 1 4.3mile/h
Forward - 2 7.4mile/h
Forward - 3 12.6mile/h
Reverse - 1 4.7mile/h
Reverse - 2 8.1mile/h
Reverse - 3 13.8mile/h
Direct Drive - Forward 1 Disabled
Direct Drive - Forward 3 14.2mile/h
Direct Drive - Reverse 3 15.4mile/h
Direct Drive - Forward 2 8mile/h
Direct Drive - Reverse 1 4.9mile/h
Direct Drive - Reverse 2 8.8mile/h

Axles

+ -
Front Fixed
Rear Oscillating
Oscillation Angle 10° ±, 8° ± with Stops

Hydraulic Cycle Times

+ -
Total Hydraulic Cycle Time 19.3s
Rack Back 4.4s
Lower Float Down 3.7s
Dump 1.8s
Raise 9.4s

Service Refill Capacities

+ -
Fuel Tank 413gal (US)
Transmission 45gal (US)
Cooling Systems 77gal (US)
Hydraulic System - Implement 86gal (US)
Hydraulic System - Steering 42gal (US)
AC Refrigerant 6lb
AC Oil 0.071gal (US)
Differential - Final Drives - Front 95gal (US)
Differential - Final Drives - Rear 91gal (US)
Engine Crankcase 32gal (US)

Hydraulic System - Steering

+ -
Steering Cycle Times - Low Idle 6.4s
Steering Cycle Times - High Idle 4.4s
Maximum Flow at 1,350 rpm 95gal/min
Steering Cut Off Pressure 4500psi
Steering System - Circuit Pilot, Load Sensing
Steering System - Pump Piston, Variable Displacement
Total Steering Angle 86°

Hydraulic System - Lift/Tilt

+ -
Lift/Tilt System - Circuit Positive Flow Control
Lift/Tilt System - Pump Variable Displacement Piston
Relief Valve Setting - Lift/Tilt 4500psi
Tilt Cylinder - Stroke 80.9in
Lift Cylinder - Bore 11in
Lift Cylinder - Stroke 45.2in
Maximum Flow at 1,850 rpm 254gal/min
Tilt Cylinder - Bore 10.5in

Dimensions - Standard Lift - Approximate

+ -
Ground to Top of ROPS 18.63ft
Ground to Top of Exhaust Stacks 17.22ft
Ground to Top of Hood 13.26ft
Ground to Bumper Clearance 3.86ft
Rear Axle - Centerline to Bumper 13.76ft
Wheel Base 19.32ft
Maximum Overall Length 52ft
Ground to Lower Hitch Clearance 2.24ft
Ground to Center of Axles 4.44ft
Rack Back Angle - Ground Level 43.4 degrees
Rack Back Angle - Carry 52.7 degrees
B-Pin Height - Maximum Lift 22.73ft
Maximum Overall Height - Bucket Raised 30.5ft
Dump Angle at Maximum Lift 50 degrees
Reach - Maximum Lift 6.95ft
Clearance at 50° Dump (Tooth Tip) 14.7ft
Rack Back Angle - Maximum Lift 65 degrees
Tread Width 10.83ft

Dimensions - High Lift - Approximate

+ -
Ground to Top of ROPS 18.63ft
Ground to Top of Exhaust Stacks 17.22ft
Ground to Top of Hood 13.26ft
Ground to Bumper Clearance 3.86ft
Rear Axle - Centerline to Bumper 13.76ft
Wheel Base 19.32ft
Maximum Overall Length 52.81ft
Ground to Lower Hitch Clearance 2.24ft
Ground to Center of Axles 4.44ft
Rack Back Angle - Ground Level 42.8 degrees
Rack Back Angle - Carry 52.5 degrees
B-Pin Height - Maximum Lift 24.58ft
Maximum Overall Height - Bucket Raised 33.08ft
Dump Angle at Maximum Lift 50 degrees
Reach - Maximum Lift 6.86ft
Clearance at 45° Dump (Tooth Tip) 15.01ft
Rack Back Angle - Maximum Lift 65 degrees
Tread Width 10.83ft

Sound Performance

+ -
Hearing Protection Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Machine Sound Power Level - Standard Machine Configuration The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Operator Sound Pressure Level The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Machine Sound Power Level - Sound Suppressed Machine Configuration The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan s

Brakes

+ -
Brakes Meet ISO 3450:2011