Gas Generator CG132B-16
At a Glance
|
|
|
|
Overview
The Cat CG132B family of gas engines are perfectly tailored to the challenges of the power plant in an age of global value chains.<br>
<br>
Highly efficient with low operating and installation costs and lubricant consumption, the Cat CG132B gas generator set is available with outputs from 400kW to 1000kW and comes with the Total Plant and Energy Management (TPEM) system.
Generator Set Specifications
+ -Maximum Continuous Rating | 1000 ekW @1.0pf |
Fuel Type | Natural Gas |
Maximum Electrical Efficiency | 41.50% |
Frequency | 50 Hz |
RPM | 1500 rpm |
Natural Gas Rating | 1000 |
Engine Specifications
+ -Engine Model | CG132B |
Displacement | 2135.8in³ |
Aspiration | TA |
Bore | 5.2in |
Stroke | 6.3in |
Generator Set Dimensions
+ -Length | 165in |
Width | 70in |
Height | 85in |
Dry Weight - Genset | 17791lb |
Standard Equipment:
Air Inlet
+ --
One-element single-stage air cleaner with enclosure and sevice indicator
-
Turbocharger with a water-cooled bearing case for all cylinder
Control Panels
+ --
TPEM (Total Plant & Energy Management System)
Cooling
+ --
Flange connections for JW inlet and outlet
-
Electrical jacket water and aftercooler coolant pump
-
Jacket water and SCAC thermostats
-
flange connections for JW inlet and outlet
-
Cat flanges on SCAC circuit
-
ANSI/DN customer flange connections for JW inlet and outlet
Exhaust
+ --
Exhaust waste gate for the CG132B-16
-
Closed crankcase ventilation system
-
PEARL/Low resistence exhaust system
Fuel System
+ --
Pre-chamber spark plugs
-
Independently controlled cylinder monitoring and ignition system
-
Electronic fuel metering valve
Generator
+ --
Anti-condensation space heater
-
Reactive droop
-
3-phase sensing and KVAR/PF control
-
Busbar connections
-
grid code generator
-
closed-coupled generator result in no torque transmission to the base frame
-
Reactive droop
-
Winding temperature detectors
Starting/charging
+ --
24V starting motors
-
Battery disconnect switch
General
+ --
Crankshaft vibration damper and guard
Optional Equipment:
Air Inlet
+ -Air cleaner with precleaner
Mounting stand
Cooling
+ -CHP skid