HP200 Portable Crushing Plant
At a Glance
King Pin Weight
56,750 lbs
|
Axle Weight
71,920 lbs
|
Request a Demo
Overview
Masaba Portable Crushing Plants are designed and built to be the toughest plants available. The Masaba Portable HP200 Plant is built on a Heavy Duty Wide Flange Beam Chassis (1) and features Upper and Lower Access Platforms (2) complete with diamond plate decking, kickplates, and double 2” handrails. The 42” Over Cone Conveyor (3) features a hydraulic fold and 3 Ply Belting that comes standard on all Masaba Conveyors. Masaba offers both open and closed (shown) systems with a variety of axle and conveyor configurations.
General
+
-
King Pin Weight |
56,750 lbs |
Axle Weight |
71,920 lbs |
Main Frame and Chassis
+
-
Various Axle Configurations • Wide Flange Beam Main Frame • Upper/Lower Access Platforms • 11R x 22.5 radial tires • Brakes • Lights
42” Over Screen Conveyor
+
-
15 hp • Dodge #6 Gear Reducer • Hydraulic Raise/Lower • CEMA C and Impact Idlers • 3’ Receiving Hopper • 3 Ply Belting with Mechanical Splice • Belt Scraper
42” Over Cone Conveyor
+
-
15 hp • Dodge #6 Gear Reducer • Hydraulic Fold • CEMA C and Impact Idlers • 3 Ply Belting with Mechanical Splice • Belt Scraper
42” Under Crusher Conveyor
+
-
15 hp • Dodge #4 Gear Reducer • CEMA C and Impact Slider Idlers • 3 Ply Belting with Mechanical Splice • Belt Scraper
36” Rear Return Conveyor
+
-
5 hp • Dodge #3 Gear Reducer • CEMA C Idlers • 3 Ply Belting with Mechanical Splice • Belt Scraper
60” Under Screen Conveyor
+
-
15 hp • Dodge #3 Gear Reducer • CEMA C Idlers • 3 Ply Belting with Mechanical Splice • Belt Scraper
(2) 18” Reversible Cross Conveyors
+
-
Center and Bottom Decks • 7.5 hp • Dodge #3 Gear Reducers • CEMA C Idlers • 3 Ply Belting with Mechanical Splice • Belt Scraper
Crushing and Screening Systems
+
-
300 hp 1200 rpm Crusher Motors • 40 hp 1200 rpm Screen Motor • Cone Reducer Ring
Features
+
-
(4) Hydraulic Lifting Jacks • (2) Swing Down Legs • (1) Coat 2 part Urethane Primer • (1) Coat 2 part Urethane Paint • Steel-shot blasted • (2) Owner’s manual for start-up and maintenance
Options
+
-
Switchgear - NEM A 4 Enclosure • Upgrade to (4) Masaba 70,000 lb Brute Run On Hydualic Jacks • Vulcanized belt Splice • Toolbox