D4K2 Track-Type Tractor
At a Glance
|
|
|
|
|
|
|
|
Overview
Experience the best finish grading tractors in the industry. The Cat® D3K2, D4K2 and D5K2 Track-Type Tractors deliver superior performance and comfort with lower operating costs.
Expand All +
Engine
+ -| Engine Model | Cat C4.4 |
| Power - Net | 92HP |
| Displacement | 269in³ |
| Bore | 4.13in |
| Stroke | 5in |
| Net Power - 2,200 rpm - SAE J1349 | 92HP |
| Note | Engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards. |
| Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | 92HP |
Weights
+ -| Operating Weight - XL | 18007lb |
| Operating Weight - LGP | 18686lb |
| Note (1) | Specifications shown are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank. |
| Note (2) | Enclosed cab adds 225 kg (495 lb). |
Transmission
+ -| Drive Pumps | 1 |
| Track Motors | 2 |
| Relief Valve Settings | 7033psi |
| Maximum Travel Speed - Forward | 5.6mile/h |
| Maximum Travel Speed - Reverse | 6.2mile/h |
Hydraulic Controls
+ -| Pump Output | 17.7gal/min |
| Relief Valve Settings | 2988psi |
Winch
+ -| Weight | 1345lb |
| Winch Drive | Hydrostatic |
| Control | Hydraulic |
| Speed | Variable |
| Drum Diameter | 10in |
| Throat Clearance | 6.75in |
| Drum Capacity - Recommended Cable | 371ft |
| Drum Capacity - Optional Cable | 256ft |
| Maximum Line Pull - Bare Drum | 40000lb |
| Maximum Line Pull - Full Drum | 25000lb |
| Maximum Line Speed - Bare Drum | 131ft/min |
| Maximum Line Speed - Full Drum | 207ft/min |
| Overall Width | 29.2in |
| Rope Diameter - Optional | 0.75in |
| Winch Length | 27.76in |
| Drum Width | 10.8in |
| Rope Diameter - Recommended | 0.63in |
Ripper
+ -| Type | Parallelogram |
| Number of Shanks | 3 |
| Height | 6.5in |
| Weight | 1222lb |
| Maximum Digging Depth | 13.3in |
| Maximum Reach - Ground Line | 23.5in |
| Maximum Ground Clearance Under Tip | 17.6in |
| Overall Width | 67.3in |
Service Refill Capacities
+ -| Crankcase - With Filter | 2.91gal (US) |
| Final Drive - Each - LGP | 2.6gal (US) |
| Transmission - Hydraulic Tank | 15.7gal (US) |
| Fuel Tank | 51.5gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 4.9gal (US) |
| Final Drive - Each - XL | 2.6gal (US) |
| Cooling System | 5.92gal (US) |
Undercarriage
+ -| Shoe Width - XL | 18in |
| Shoe Width - LGP | 25in |
| Length - Track on Ground - XL | 89in |
| Length - Track on Ground - LGP | 89in |
| Track Gauge - LGP | 68in |
| Number of Rollers - Each Side | 7 |
| Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 43 |
| Number of Shoes - Each Side - SystemOne Undercarriage | 38 |
| Ground Contact Area - XL | 3206in² |
| Ground Pressure - XL | 5.6psi |
| Ground Pressure - LGP | 4.2psi |
| Ground Contact Area - LGP | 4425in² |
| Track Gauge - XL | 61in |
Cab
+ -| FOPS | ISO 3449:2005 Level II |
| ROPS | ISO 6396:2008 |
| Sound Levels - ISO 6396:2008 | 79dB(A) |
| Sound Levels - SAE J1166 FEB2008 | 79dB(A) |
Dimensions
+ -| BLADE: Blade Capacity (SAE) - Intermediate | 1.96yd³ |
| BLADE: Blade Capacity (SAE) - LGP | 2.42yd³ |
| BLADE: Blade Capacity (SAE) - XL | 2.59yd³ |
| BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate | 52° to 58° |
| BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
| BLADE: Blade Cutting Edge Angle, Adjustable - XL | 52° to 58° |
| BLADE: Blade Height - Intermediate | 33.9in |
| BLADE: Blade Height - LGP | 35.8in |
| BLADE: Blade Height - XL | 39.8in |
| BLADE: Blade Lift Height - Intermediate | 29.3in |
| BLADE: Blade Lift Height - LGP | 27.9in |
| BLADE: Blade Lift Height - XL | 29.3in |
| BLADE: Blade Width - Intermediate | 115in |
| BLADE: Blade Width - LGP | 124in |
| BLADE: Blade Width - XL | 109.5in |
| BLADE: Blade Width at Maximum Angle - Intermediate | 105.1in |
| BLADE: Blade Width at Maximum Angle - LGP | 113.1in |
| BLADE: Blade Width at Maximum Angle - XL | 100.1in |
| BLADE: Digging Depth - Intermediate | 23.2in |
| BLADE: Digging Depth - LGP | 23.2in |
| BLADE: Digging Depth - XL | 22.5in |
| BLADE: Maximum Angle (either side) - Intermediate | 25° |
| BLADE: Maximum Angle (either side) - LGP | 25° |
| BLADE: Maximum Angle (either side) - XL | 25° |
| BLADE: Maximum Tilt - Intermediate | 17.6in |
| BLADE: Maximum Tilt - LGP | 17.2in |
| BLADE: Maximum Tilt - XL | 15.2in |
| Ground Clearance - LGP | 13in |
| Ground Clearance - XL | 13in |
| Length - Basic Tractor - Without Blade - LGP | 128.9in |
| Length - Basic Tractor - Without Blade - XL | 128.9in |
| Overall Length - With Blade - LGP | 168.3in |
| Overall Length - With Blade - XL | 168.3in |
| Track Gauge - LGP | 67.9in |
| Track Gauge - XL | 61in |
| Tractor Height - LGP | 108.8in |
| Tractor Height - XL | 108.8in |
| Width - Tractor - Standard Shoes - No Blade - LGP | 92.9in |
| Width - Tractor - Standard Shoes - No Blade - XL | 79.1in |
Standard Equipment:
Electrical
-
Alternator, 12 volt, 120 Amp, heavy duty brushless
-
Alarm, backup
-
Batteries (2), heavy duty, maintenance free, 1,500 CCA
-
Diagnostic connector
-
Horn, electric
-
Lights, halogen, 2 front and 2 rear
-
Starter, electric, 12 volt
Operator Station
-
ROPS/FOPS canopy
-
Seat, air suspended, cloth or vinyl
-
Seatbelt, retractable 76 mm (3 in)
-
Foot pads, dash
-
Electronic Monitoring System with:
– Gauges for engine coolant temperature, hydraulic oil temperature and fuel level
– Travel speed limiter, electronic
– Engine RPM and gear display
– Hour meter, electric
– Engine air cleaner service indicator, electronic
– Water-in-fuel indicator, electronic -
Slope Indicate
-
Throttle switch, rotary
-
Eco mode
-
Controls, seat mounted, fore/aft adjustment
-
Armrests, adjustable
-
Mirror, rearview, inside
-
Single pedal combining deceleration and braking functions
-
Independent forward/reverse speed settings
-
Power port, 12 volt
-
Coat hook
-
Storage compartment
-
Cup holder
-
Floor mat, rubber, heavy duty
Hydraulics
-
Hydraulics, 3 valve
-
Load sensing hydraulics
-
Single lever, three function control
-
Hydraulic pump and oil
-
Stable blade control
Power Train
-
Cat C4.4 diesel engine, turbocharged, U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) certified with aftertreatment
-
Aftercooler, Air-to-Air (ATAAC)
-
Aluminum bar plate cooling system (radiator, power train)
-
Air cleaner with precleaner, automatic dust ejection and under-hood intake
-
Dual path, closed-loop hydrostatic transmission
-
Electric fuel priming pump
-
Fuel/water separator
-
Automatic Traction Control
Undercarriage
-
SALT Undercarriage
-
7 roller track frame
-
Track rollers, lifetime lubricated
-
Carrier rollers
-
Track adjusters, hydraulic
-
Guards, front/rear guiding
-
Master link
Other Standard Equipment
-
Cat Product Link™ PLE732 Satellite/PLE742 Cellular
-
C-Frame, VPAT, hydraulic cylinders and lines
-
Lockable engine enclosures
-
Front pull device
-
Rigid drawbar
-
Ecology drains (engine, power train and implement oil and engine coolant)
-
Scheduled oil sampling ports (engine, power train implement oil)
-
Vandalism protection
-
Heavy duty crankcase guard
Antifreeze
-
Extended life coolant, –37° C (–35° F)
Optional Equipment:
Electrical
Integrated four front halogen lights, two rear halogen lights
Power Train
Drive, auxiliary
Installation, winch
Undercarriage
Track Pairs, XL:
– Track, 460 mm (18 in) MS SystemOneTrack Pairs, LGP:
– Track, 635 mm (25 in) MS SystemOne
Operator Station
Cab with air conditioning*
Cab, polycarbonate windows and air conditioning*
Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controlsRadio, AM/FM, Bluetooth
Sound suppression
*Air Conditioning System: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Hydraulics
Hydraulics, 4 valve for use with ripper
Hydraulics, 4 valve for use with winch
Guards
Guard, rear, heavy duty
Grill, radiator, heavy duty
Guard, track guiding, center
Guard, track roller, full length
Screen, rear, cab
Screen, side, cab
Screen, rear, canopy
Screen, front and doors, canopy
Sweeps, front
Sweeps, rear
Blades
VPAT XL blade
VPAT LGP blade
VPAT Intermediate blade
Rear Attachments
Drawbar, towing
Mounting, winch
Ripper, parallelogram, includes three shanks and teeth
Rear Attachment Control
Control, ripper
Control, winch
Control, ripper and winch
Machine Control And Guidance
Cat GRADE with 3D
Cat GRADE with Slope Assist
Power Pitch blade control
Starting Aids
Heater, engine, coolant, 120 volt
Starting aid, ether
Other Attachments
Machine Security System
Antifreeze
Extended life coolant, –50° C (–58° F)
Field Installed Attachment
Winch, hydraulic, high performance, 40 m/min (131 ft/min) line speed
Winch, hydraulic retrieval, 15 m/min (50 ft/min) line speed
*This estimate is for the base rental charge only. Other fees and charges may apply and will be calculated at the time of rental. Does not include delivery fees.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.