MD5075C Track Drill
At a Glance
|
|
|
|
|
|
|
|
Overview
The new MD5075C Track Drill includes new features that are aligned with these main customer needs: Reducing Downtime and Cost, Enhancing Productivity, and being Fully Supported. High productivity is a direct result of its best-in-class rock drill, fast and electronics free carousel rod changer, and a Cat engineered power train with a large, variable air compressor. Several technology products assist with optimum operations and equipment management. Troubleshooting is easy because MD5075C is equipped with Cat electronics that allow the use of Cat ET. Drill uptime can make or break your operation, because without drilling there can be no loading, hauling or crushing. If high mechanical availability is one of your top concerns, the MD5075C is an ideal solution thanks to its enhanced durability, improved serviceability and lower maintenance requirements.
Expand All +
Specifications
+ -| Hole Diameter | Up to 114.3 mm (4.5 in) |
| Hole Diameter | Up to 114.3 mm (4.5 in) |
| Hole Depth | 31.2 m (102.5 ft) – Maximum Depth |
| Air Compressor | 9.9 m3/min (350 cfm) |
General
+ -| Hole Depth Maximum | 102.5ft |
| Compressor | 350ft³/min |
| Engine | Cat C9, six (6) cylinder, electronically controlled, water-cooled, turbocharged and air-to-air after-cooled diesel engine rated at 224 kW (300 hp) at 1,800 rpm |
| Engine C9 | 224 kW (300 hp) at 1,800 rpm |
| Hole Diameter Range | 76.2 mm-114.3 mm (3.0 in-4.5 in) |
| Rock Drill HPR5123 | 31mm H2O |
| Compressor | 9.9 m3/min @ 10.2 bar (350 ft3/min @ 150 psi) |
Cab
+ -| Components (1) | ROPS/FOPS certified |
| Components (2) | Digital engine and drill readout system |
| Components (3) | Joysticks in both armrests |
| Updated Larger Monitor Display | – Technology advances – Hammer adjustment from cab – Air pressure control from cab |
| Total Glass | 33ft² |
| Components (4) | Six way adjustable seat; forward/back, up/down and reclining |
| Components (5) | Drill depth monitoring |
| Electro-Hydraulic Controls | – Joysticks – Bright displays – Common to MD5150C |
| Total Operator Control Of | – Hammer power – Hole flushing |
Carousel Rod Changer System
+ -| 3.66 m (12 ft) Rod Changer (1) | 45 mm – 6 Rod +1 or 51 mm – 6 Rod +1 |
| 3.66 m (12 ft) Rod Changer (2) | Total hole depth 27.4 m (90 ft) with 6.1 m (20 ft) starter steel |
| 4.27 m (14 ft) Rod Changer (1) | 45 mm – 6 Rod +1 or 51 mm – 6 Rod +1 |
| 4.27 m (14 ft) Rod Changer (2) | Total hole depth 31 m (102 ft) with 6.1 m (20 ft) starter steel |
Air Compressor
+ -| Components (1) | Dual filter elements |
| Components (2) | Hydraulic motor driven |
| Components (3) | Intake check valve and receiver-separator combination tank |
| Screw-Type Compressor | 9.9 m3/min @ 10.2 bar (350 ft3/min @150 psi) |
Power Train
+ -| Air Filter | Dual element |
| Cat C9, Six (6) Cylinder, Electronically Controlled, Water-cooled, Turbocharged and Air-to-Air After-cooled Diesel Engine | 224 kW @ 1,800 rpm (300 hp @ 1,800 rpm) |
| Fuel Tank | 130gal (US) |
Rock Drill
+ -| HPR5123 Hydraulic Powered Percussion Rock Drill - Blow Rate | 2500-2700 bpm |
| HPR5123 Hydraulic Powered Percussion Rock Drill - Motors | Dual hydraulic variable rotation motors producing 1356 N∙m (1,000 lbf-ft) torque |
| HPR5123 Hydraulic Powered Percussion Rock Drill - Output Energy at 160 rpm | 31mm H2O |
| HPR5123 Hydraulic Powered Percussion Rock Drill - Percussion Pressure | Up to 200 bar (Up to 2,900 psi) |
| HPR5123 Hydraulic Powered Percussion Rock Drill - Option | Rock drill auto lube system option |
| HPR5123 Hydraulic Powered Percussion Rock Drill - Rod Diameter Choices | 45 or 51 mm (1.8 or 2.0 in) |
| HPR5123 Hydraulic Powered Percussion Rock Drill - Weight | 877lb |
| Optional HPR4519 Rock Drill - Blow Rate | 2500-2700 bpm |
| Optional HPR4519 Rock Drill - Motors | Dual hydraulic variable rotation motors producing 908 N∙m (670 lbf-ft) torque |
| Optional HPR4519 Rock Drill - Output Energy at 240 rpm | 25mm H2O |
| Optional HPR4519 Rock Drill - Percussion Pressure | Up to 200 bar (Up to 2,900 psi) |
| Optional HPR4519 Rock Drill - Rod Diameter | 1.8in |
| Optional HPR4519 Rock Drill - Weight | 660lb |
Drill Assist from MD5150C
+ -| Monitoring System (1) | Minimizes overfeeding |
| Monitoring System (2) | Operator-selected, smooth, electrical control system for all drilling functions |
| Monitoring System (3) | Anti-jam |
| Monitoring System (4) | Anti-plug |
| Monitoring System (5) | Anti-plunge |
| Monitoring System (6) | Monitors main hydraulic system (hammer, feed, air and rotation pressure) and automatically adjusts to pre-programmed parameters |
Cat® 315 Undercarriage
+ -| Components (1) | Hydraulic motor-driven track assemblies with towing disconnects. |
| Components (2) | Spring applied disc brakes |
| Gradeability | 35° |
| Ground Clearance | 15in |
| Ground Pressure | 12psi |
| Track Gauge | 80in |
| Track Oscillation | ±10° |
| Tram Maximum Speed | 2.5mile/h |
| Wide Triple Grouser Pads | 15in |
Cat 315 Undercarriage
+ -| Components | Triple rock grousers |
Dust Collecting System
+ -| Abrasive Resistant Suction Hose | 5in |
| Components (1) | Hydraulic motor powered, dry dust collecting system |
| Components (2) | Dust collector sized to clean holes up to 127 mm (5.0 in) in diameter |
| Filter Area | 304ft² |
Boom System
+ -| Boom Dump Below Horizontal | 27° |
| Boom Extension | 5ft |
| Boom Length | 12.5ft |
| Boom Lift Above Horizontal | 38° |
| Boom Swing | 51° L to 15° R |
Cooler Package
+ -| Components (1) | Four vertical sections; compressor, engine, hydraulic and air after cooler |
| Components (2) | Sized for ambient capability of 52° C (125° F) |
| Fan Assembly | 42in |
Dimensions (Approximate)
+ -| Shipping Height | 11.2ft |
| Shipping Length | 40.4ft |
| Shipping Width | 8.6ft |
| Shipping Weight | 43000lb |
Standard Equipment:
Track Undercarriage
-
Cat 315 excavator components.
-
Hydraulic, motor-driven, track assemblies with 380 mm (15 in) grousers, hydraulic cylinder controlled track oscillation, hydraulic released, spring applied, disc brakes and triple rock grousers.
Power
-
Cat C9, six (6) cylinder, electronically controlled, water-cooled, turbocharged and air-to-air after-cooled diesel engine rated at 224 kW (300 hp) at 1,800 rpm includes ether for cold weather starting.
-
Cat C9 engine meets Tier 3/Stage IIIA equivalent emission standards.
-
The engine speed is automatically controlled by power demand.
Hydraulic System
-
Two (2) pressure compensated load sensing axial piston pumps, two (2) fixed displacement traction two-speed drive motors and a fixed displacement compressor drive motor.
-
Hydraulic test ports conveniently located.
Compressor
-
Hydraulic motor-driven 9.9 m3/min @ 10.2 bar (350 ft3/min @ 150 psi) screw-type compressor.
Boom System
-
3.81 m (12.5 ft) telescopic boom with 1.5 m (5 ft) extension.
-
0.91 m (3 ft) feed extension complete with drill positioner and universal feed table.
Feed System
-
Hydraulic motor-driven steel channel chain feed complete with the power centralizer. The feed will accept a 6.1 m (20 ft) steel for single pass with a hose reel, which is standard.
-
45 or 51 mm drill steel.
-
Pre-split capabilities.
-
Emergency shut down line.
Rock Drill
-
Model HPR5123 hydraulic powered percussion drill with an energy/frequency combination that covers a wide range of applications.
-
Hydraulic motor powered variable speed rotation.
Cab
-
Certified ROPS/FOPS pressurized, fixed cab complete with heater, air conditioner, wipers, drilling lights, electronic two (2) axis angle indicator and all necessary drilling controls.
-
AM/FM Stereo with Bluetooth and USB.
Rod Changer
-
Carousel rod changer design for 4.26 m (14 ft) drill steel.
-
Carousel will hold 6 rods.
-
With one rod in the feed the total drill string length is 31.7 m (104 ft).
-
45 or 51 mm drill steel is standard.
Dust Collecting System
-
Multiple element, hydraulic motor powered, dry dust collecting system; complete with feed mounted precleaner and power pick up pot.
Other Standard Features
-
Power coupling greaser.
-
Complete sheet metal enclosure.
-
Collaring circuit.
-
Toe hole capabilities.
Optional Equipment:
*This estimate is for the base rental charge only. Other fees and charges may apply and will be calculated at the time of rental. Does not include delivery fees.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.