Menu
x
View Details

Tap to Call Find a Sales Rep

2014 914K Compact Wheel Loaders

914K Compact Wheel Loaders

At a Glance

Maximum Gross Power
97 hp
Maximum Gross Power
97 HP
Operating Weight
17910.0 lb
Operating Weight
17910 lb
Get More Information

Rates

Please call 1-866-551-4602 for rates.

Overview

The Cat 914K Compact Wheel Loader sets a new standard for productivity, fuel efficiency and comfort. On-the-go operator tuned hydraulics and drivetrain adjust the machine’s response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long. The new Cat Optimized Z-bar Loader linkage delivers the performance and breakout forces of a traditional Z-bar linkage with the parallelism and load handling capability of a tool carrier. Experience the new industry benchmark.

Expand All +

Engine

+ -
Maximum Gross Power 97hp
Maximum Gross Power 97HP
Net Power 96.0hp
Net Power 96HP
Maximum Gross Power - ISO 14396 97HP
Displacement 231.8in3
Engine Model Cat® C3.8 Turbo
Maximum Gross Power - ISO 14396 97.0hp
Maximum Gross Power - SAE J1995 97.0hp
Note Engine meets U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards.
Peak Torque 248lb/ft
RPM at Peak Torque 1500r/min
RPM at Rated Power 2400r/min
Rated Net Power - ISO 9249/EEC 96HP
Rated Net Power - SAE J1349 92.0hp
Rated Torque 237lb/ft
Stroke 4.7in
Torque Rise 17%
Bore 3.9in
Displacement 231.8in³
Engine Model Cat� C3.8 Turbo
Maximum Gross Power - SAE J1995 97HP
Note Engine meets U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards.
Rated Net Power - SAE J1349 92HP
Stroke 4.7in

Weights

+ -
Operating Weight 17910.0lb
Operating Weight 17910lb
Operating Weight - High Lift 18030lb
Operating Weight - Standard Lift 17910lb

Buckets

+ -
Bucket Capacities 1.2 m3-2.5 m3 (1.6 yd3-3.3 yd3)
Bucket Capacities 1.2 m3-2.5 m3 (1.6 yd3-3.3 yd3)
General Purpose 1.2-1.5 m3 (1.6-2.0 yd3)
Type Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention.
General Purpose 1.2-1.5 m3 (1.6-2.0 yd3)

Operating Specifications

+ -
Rated Bucket Capacity 3.3yd3
Rated Bucket Capacity 3.3yd³
Clearance: full lift and 45° dump 112.0in
Full Turn Tip Load 12294lb
Full Turn Tipping Load - High Lift 8603lb
Full Turn Tipping Load - Standard Lift 10538lb
Reach: full lift and 45° dump 31.0in
Steering Articulation Angle - Each Direction 40°
Clearance - Full Lift and 45° Dump 112in
Reach - Full Lift and 45° Dump 31in

Cab

+ -
ROPS ROPS: SAE J1040 MAY94, ISO 3471-1994.
ROPS ROPS: SAE J1040 MAY94, ISO 3471-1994.
FOPS FOPS: SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
FOPS FOPS: SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
Sound The declared dynamic operator sound pressure level per ISO 6396:2008 is: - Deluxe cab: 75 dB(A)

Service Refill Capacities

+ -
Cooling System 4.4gal
Cooling System 4.4gal (US)
Fuel Tank 39.6gal
Fuel Tank 39.6gal (US)
Hydraulic System 22.5gal
Hydraulic System 22.5gal (US)
Axle - Front, Center 1.98gal (US)
Axle - Front, Each Hub 0.58gal (US)
Axle - Rear, Center 1.98gal (US)
Axle - Rear, Each Hub 0.58gal (US)
Engine Crankcase 3.4gal
Hydraulic Tank - Refill 15.9gal (US)
Transmission (gear box) 0.85gal
Engine Crankcase 3.4gal (US)
Transmission - Gear Box 0.85gal (US)

Transmission

+ -
Forward - High Range 25mile/h
Forward - Low Range, Speed Range 1 6.3mile/h
Forward - Low Range, Speed Range 2 12.5mile/h
Reverse - High Range 25mile/h
Reverse - Low Range, Speed Range 1 6.3mile/h
Reverse - Low Range, Speed Range 2 12.5mile/h
Type (1) Changing from Low Range to High Range is on-the-go for added convenience.
Type (2) Creeper control allows maximum speed range adjustability from 0 to 10 km/h (6 mph) in Speed Range 1.

Power Train

+ -
Brakes - Park Brake Cable applied, spring release
Brakes - Service Brakes Inboard wet disc
Front Axle Fixed
Front Axle - Traction Aid Locking differential
Rear Axle Oscillating
Rear axle - Oscillation �11 degrees
Rear Axle - Traction Aid Locking differential
Type (1) Power train is fully hydrostatic, operating with twin motors on a gear reduction system to amplify torque.
Type (2) A built-in clutch on one motor de-clutches at higher speeds to gain maximum travel speed.

Tires

+ -
Note Wheel sets are interchangeable between the 910K and 914K.
Tire Size - Non-Pneumatic - Flexport 53.5�9�16.5 (15.5/17.5�25 equivalent)
Tire Size - Optional (1) 17.5-R25
Tire size, optional 17.5-25 16PR
Tire Size - Standard 17.5-25 12PR
Tire Size - Optional (2) 17.5-25 16PR

Steering

+ -
Maximum flow - steering pump 22.2gal/min
Maximum steering torque - 0° (straight machine) 27369.0lb ft
Maximum steering torque - 40° (full turn) 21593.0lb ft
Maximum working pressure - steering pump 3263.0psi
Number of Steering Wheel Turns - Stop to Stop, Turning Wheel at < 27 rpm 5.75 turns
Number of Steering Wheel Turns - Stop to Stop, Turning Wheel at > 67 rpm 3.75 turns
Steering articulation angle each direction 40.0Degrees
Steering Cycle Times - Stop to Stop - At 2,400 rpm Engine Speed, 90 rpm Steering Wheel Speed 2.8s
Steering cylinder: double acting - Bore diameter 2.4in
Steering cylinder: double acting - Rod diameter 1.4in
Steering cylinder: double acting - Stroke 15.7in
Type Steering system uses a dedicated pump with dual double acting cylinders.
Maximum Flow - Steering Pump 22.2gal/min
Maximum Steering Torque - 0° (Straight Machine) 27369lb/ft
Maximum Steering Torque - 39° (Full Turn) 21593lb/ft
Maximum Working Pressure - Steering Pump 3263psi
Steering Articulation Angle - Each Direction 40°
Steering Cylinder, Double Acting - Bore Diameter 2.4in
Steering Cylinder, Double Acting - Rod Diameter 1.4in
Steering Cylinder, Double Acting - Stroke 15.7in

Loader Hydraulic System

+ -
Cycle Time - Dump 1.8s
Cycle time - Float 3.7s
Cycle Time - Lift 5.3s
Cycle Time - Lower, Float 4s
Cycle time - Rackback 2.4s
Lift Cylinder - Bore Diameter 3.9in
Lift Cylinder - Rod Diameter 2.4in
Lift cylinders - Stroke 23.3in
Main Relief Pressure 4061psi
Maximum Flow - Implement Pump - 3rd Function 25gal/min
Maximum Flow - Implement Pump - 4th Function 25gal/min
Maximum Pump Flow 33gal/min
Maximum working pressure - implement pump 3046.0psi
Tilt Cylinder - Bore Diameter 3.9in
Tilt Cylinder - Rod Diameter 2.4in
Tilt Cylinder - Stroke 22.8in
Maximum Working Pressure - Implement Pump 3046psi
*This estimate is for the base rental charge only. Other fees and charges may apply and will be calculated at the time of rental. Does not include delivery fees.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.