962M Wheel Loader
360° Exterior View
360° Interior View
At a Glance
|
|
|
|
|
|
|
|
Overview
The new 962M Wheel Loader has a U.S. EPA Tier 4 Final/EU Stage IV ACERT™ engine equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically lets us meet our customer’s high expectations for productivity, fuel efficiency, reliability and service life. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to operators. M Series Loaders are 10% more fuel efficient than the K Series Loaders and up to 25% more efficient than the H Series Loaders they replace. (Fuel efficiency is measured in mass of material moved per volume of fuel burned. Average efficiency improvement as tested and analyzed for an average composite cycle and stand configuration with variations per comparable model with and without economy mode active. Factors influence result variation such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.) Aggregate Handler and other optional configurations are available. (Optional configuration and equipment may vary from region to region. Consult your Caterpillar representative for further details.)
Expand All +
Weights
+ -| Operating Weight | 44591lb |
| Operating Weight | 44591lb |
| Note | Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering, |
| Note | Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering, |
Buckets
+ -| Bucket Capacities | 2.5-9.2 m? (3.3-12.0 yd?) |
Engine
+ -| Engine Model | Cat C7.1 ACERT |
| Engine Model | Cat C7.1 ACERT |
| Displacement | 428in3 |
| Displacement | 428in³ |
| Net Power – ISO 9249 | 250hp |
| Peak Gross Torque (1,350 rpm) – SAE J1995 | 921lbf-ft |
| Peak Gross Torque (1,350 rpm) – ISO 14396 | 918lbf-ft |
| Maximum Gross Power - 2,100 rpm - SAE J1995 | 271HP |
| Maximum Gross Power - 2,100 rpm - ISO 14396 - Metric | 273HP |
| Maximum Net Power - 2,100 rpm - SAE J1349 | 250HP |
| Max Net Power @ 2,100 rpm – SAE J1349 | 250hp |
| Max Net Power @ 2,100 rpm – ISO 9249 | 250hp |
| Max Net Power @ 2,100 rpm – ISO 9249 (metric) | 253hp |
| Maximum Net Torque - 1,350 rpm | 865ft·lbf |
| Maximum Gross Power - 2,100 rpm - ISO 14396 | 269HP |
| Maximum Net Power - 2,100 rpm - ISO 9249 | 250HP |
| Maximum Net Power - 2,100 rpm - ISO 9249 - Metric | 253HP |
| Net Power - ISO 9249 | 250HP |
| Peak Gross Torque - 1,350 rpm - ISO 14396 | 918ft·lbf |
| Peak Gross Torque - 1,350 rpm - SAE J1995 | 921ft·lbf |
Transmission
+ -| Forward 1 | 4.3mph |
| Forward - 1 | 4.3mT/hr |
| Forward 2 | 7.5mph |
| Forward - 2 | 7.5mT/hr |
| Forward 3 | 12.0mph |
| Forward - 3 | 12mT/hr |
| Forward 4 | 16.0mph |
| Forward - 4 | 16mT/hr |
| Reverse 1 | 4.3mph |
| Reverse - 1 | 4.3mT/hr |
| Reverse 2 | 7.5mph |
| Reverse - 2 | 7.5mT/hr |
| Reverse 3 | 16.0mph |
| Reverse - 3 | 16mT/hr |
| Forward 5 | 24.5mph |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius. |
| Forward - 5 | 24.5mT/hr |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius. |
Operating Specifications
+ -| Breakout Force | 42489lbf |
| Breakout Force | 42489lbf |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | 25814lb |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 27494lb |
| Note | For a machine configuration as defined under “Weight.” |
| Note | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Note (1) | For a machine configuration as defined under ?Weight.? |
| Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Bucket Capacities
+ -| Bucket Range | 2.5-9.2 m? (3.3-12.0 yd?) |
| Bucket Range | 2.5-9.2 m³ (3.3-12.0 yd³) |
Hydraulic System
+ -| Hydraulic Cycle Time – Total | 8.9Seconds |
| Implement Pump Type | Variable Axial Piston |
| Implement System - Maximum Pump Output at 2,150 rpm | 76gal/min |
| Implement System - Maximum Operating Pressure | 4250psi |
| Hydraulic Cycle Time - Total | 8.9s |
Service Refill Capacities
+ -| Cooling System | 15.6gal |
| Crankcase | 5.8gal |
| Transmission | 11.4gal |
| Differentials and Final Drives – Front | 11.4gal |
| Differentials and Final Drives – Rear | 11.4gal |
| Hydraulic Tank | 33.0gal |
| DEF Tank | 4.2gal |
| Fuel Tank | 72.6gal |
| Cooling System | 15.6gal (US) |
| Crankcase | 5.8gal (US) |
| DEF Tank | 4.2gal (US) |
| Differential - Final Drives - Front | 11.4gal (US) |
| Differential - Final Drives - Rear | 11.4gal (US) |
| Fuel Tank | 72.6gal (US) |
| Hydraulic Tank | 33gal (US) |
| Transmission | 11.4gal (US) |
Sound
+ -| With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008) | 70dB(A) |
| With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008) | 108dB(A) |
| With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013) | 75 dB(A)* |
| Note | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 69dB(A) |
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008) | 106 LWA** |
| Note | **European Union Directive “2000/14/EC” as amended by “2005/88/EC.” |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) | 108dB(A) |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) | 75 dB(A)* |
| With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 70dB(A) |
| Note (1) | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Note (2) | **European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.? |
Dimensions – Standard Lift
+ -| Height to Top of Hood | 8.83ft |
| Height to Top of Exhaust Pipe | 11.17ft |
| Height to Top of ROPS | 11.33ft |
| Ground Clearance | 1.17ft |
| Center Line of Rear Axle to Edge of Counterweight | 7.08ft |
| Center Line of Rear Axle to Hitch | 5.50ft |
| Wheelbase | 11.00ft |
| Overall Length (without bucket) | 23.75ft |
| Hinge Pin Height at Maximum Lift | 13.92ft |
| Lift Arm Clearance at Maximum Lift | 11.33ft |
| Rack Back at Maximum Lift | 59 degrees |
| Rack Back at Carry Height | 49 degrees |
| Rack Back at Ground | 37 degrees |
| Tread Width | 7.00ft |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
Dimensions - Standard Lift
+ -| Hinge Pin Height at Carry Height | 2.17ft |
| Maximum Width - Over Tires - Loaded | 9.25ft |
| Centerline of Rear Axle to Edge of Counterweight | 7.08ft |
| Centerline of Rear Axle to Hitch | 5.5ft |
| Ground Clearance | 1.17ft |
| Height - Top of Exhaust Pipe | 11.17ft |
| Height - Top of Hood | 8.83ft |
| Height - Top of ROPS | 11.33ft |
| Hinge Pin Height at Maximum Lift | 13.92ft |
| Lift Arm Clearance at Maximum Lift | 11.33ft |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Overall Length - Without Bucket | 23.75ft |
| Rack Back - Carry Height | 49 degrees |
| Rack Back - Maximum Lift | 59 degrees |
| Rack Back at Ground | 37 degrees |
| Tread Width | 7ft |
| Wheel Base | 11ft |
Dimensions – High Lift
+ -| Height to Top of Hood | 8.83ft |
| Height to Top of Exhaust Pipe | 11.17ft |
| Height to Top of ROPS | 11.33ft |
| Ground Clearance | 1.17ft |
| Center Line of Rear Axle to Edge of Counterweight | 7.08ft |
| Center Line of Rear Axle to Hitch | 5.50ft |
| Wheelbase | 11.00ft |
| Overall Length (without bucket) | 23.75ft |
| Hinge Pin Height at Maximum Lift | 14.83ft |
| Lift Arm Clearance at Maximum Lift | 11.83ft |
| Rack Back at Maximum Lift | 59 degrees |
| Rack Back at Carry Height | 49 degrees |
| Rack Back at Ground | 37 degrees |
| Tread Width | 7.00ft |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
Dimensions - High Lift
+ -| Hinge Pin Height at Carry Height | 2.58ft |
| Maximum Width - Over Tires - Loaded | 9.25ft |
| Centerline of Rear Axle to Edge of Counterweight | 7.08ft |
| Centerline of Rear Axle to Hitch | 5.5ft |
| Ground Clearance | 1.17ft |
| Height - Top of Exhaust Pipe | 11.17ft |
| Height - Top of Hood | 8.83ft |
| Height - Top of ROPS | 11.33ft |
| Hinge Pin Height at Maximum Lift | 14.83ft |
| Lift Arm Clearance at Maximum Lift | 11.83ft |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Overall Length - Without Bucket | 23.75ft |
| Rack Back - Carry Height | 49 degrees |
| Rack Back - Maximum Lift | 59 degrees |
| Rack Back at Ground | 37 degrees |
| Tread Width | 7ft |
| Wheel Base | 11ft |
Standard Equipment:
Optional Equipment:
*This estimate is for the base rental charge only. Other fees and charges may apply and will be calculated at the time of rental. Does not include delivery fees.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.