Menu
x
View Details

Tap to Call Find a Sales Rep

2014 966M XE Wheel Loader

966M XE Wheel Loader

At a Glance

Bucket Capacities
2.5-9.2 m? (3.25-12.0 yd?)
Engine Model
Cat® C9.3 ACERT™
Engine Model
Cat? C9.3 ACERT?
Displacement
568 in³
Get More Information

Rates

Please call 1-866-551-4602 for rates.

Overview

The new 966M XE Wheel Loader has a Tier 4 Final/Stage IV ACERT engine equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically helps to meet customer’s high expectations for productivity and fuel efficiency. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to operators. The 966M XE Wheel Loader, with an advanced power train, has been designed to deliver superior performance and fuel efficiency while simplifying the operator’s interface and operating technique. This machine excels at truck loading. Aggregate Handler and other optional configurations are available.** ** Optional configuration and equipment may vary from region to region. Consult your Caterpillar representative for further details.

Expand All +

Buckets

+ -
Bucket Capacities 2.5-9.2 m? (3.25-12.0 yd?)

Engine

+ -
Engine Model Cat® C9.3 ACERT™
Engine Model Cat? C9.3 ACERT?
Displacement 568in³
Displacement 568in³
Net Power – ISO 9249 298hp
Maximum Net Power – SAE J1349/ISO 9249 298hp
Maximum Net Power (1,600 rpm) – SAE J1349 298hp
Maximum Net Power (1,600 rpm) – ISO 9249 298hp
Peak Gross Torque (1,200 rpm) – SAE J1995 1275lbf-ft
Peak Gross Torque (1,200 rpm) – ISO 14396 1260lbf-ft
Maximum Net Torque - 1,200 rpm 1193ft-lb
Maximum Net Power - 1,600 rpm - ISO 9249 298HP
Maximum Net Power - 1,600 rpm - SAE J1349 298HP
Maximum Net Power - SAE J1349/ISO 9249 298HP
Net Power - ISO 9249 298HP
Peak Gross Torque - 1,200 rpm - ISO 14396 1260ft-lb
Peak Gross Torque - 1,200 rpm - SAE J1995 1275ft-lb

Axles

+ -
Front Fixed
Front Fixed
Rear Oscillating ±13 degrees
Rear Oscillating ?13 degrees
Maximum Single-Wheel Rise and Fall 19.5in
Maximum Single-Wheel Rise and Fall 19.5in

Brakes

+ -
Brakes Brakes meet ISO 3450 standards
Brakes Brakes meet ISO 3450 standards

Service Refill Capacities

+ -
Cooling System 19gal
Cooling System 19gal (US)
Crankcase 6.5gal
Crankcase 6.5gal (US)
Transmission 15.9gal
Transmission 15.9gal (US)
Hydraulic Tank 33gal
Hydraulic Tank 33gal (US)
DEF Tank* 4.4gal (US)
Note *Must meet the requirements outlined in ISO 22241-1.
Fuel Tank 82.7gal
DEF Tank* 4.4gal
Differentials and Final Drives – Front 15.1gal
Differentials and Final Drives – Rear 15.1gal
Note *Must meet the requirements outlined in ISO 22241-1.
Differential - Final Drives - Front 15.1gal (US)
Differential - Final Drives - Rear 15.1gal (US)
Fuel Tank 82.7gal (US)

Cab

+ -
ROPS/FOPS ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards
ROPS/FOPS ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards

Operating Specifications

+ -
Breakout Force 38984lbf
Static Tipping Load - Full 37° Turn - No Tire Deflection 34873lb
Static Tipping Load - Full 37° Turn - With Tire Deflection 32329lb

Hydraulic System

+ -
Hydraulic Cycle Time - Rated Payload - Dump, at Maximum Raise 1.4s
Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down 2.6s
Hydraulic Cycle Time - Rated Payload - Raise from Carry Position 6.1s
Hydraulic Cycle Time - Rated Payload - Total 10.1s
Implement Pump Type Variable Displacement Piston
Implement System - Maximum Operating Pressure 4496psi
Implement Pump Type Variable Displacement Piston
Implement System - Maximum Pump Output at 1,600 rpm 103gal/min
Implement System – Maximum Operating Pressure 4496psi
Implement System - Maximum Pressure - Optional 3rd/4th Function 2999psi
Hydraulic Cycle Time with Rated Payload – Raise from Carry Position 6.1Seconds
Hydraulic Cycle Time with Rated Payload – Dump, at Maximum Raise 1.4Seconds
Hydraulic Cycle Time with Rated Payload – Lower, Empty, Float Down 2.6Seconds
Hydraulic Cycle Time with Rated Payload – Total 10.1Seconds
Implement System - Maximum Flow - Optional 3rd/4th Function 69gal/min

Weight

+ -
Note *For 4.2 m3 (5.5 yd3) general purpose buckets with BOCE.

Transmission Virtual Gears

+ -
Forward 2 7.7mph
Forward 3 13.5mph
Forward 4 24.4mph

Transmission - Virtual Gears

+ -
Reverse - 1 4.1mile/h
Reverse - 2 7.7mile/h
Reverse - 3 17.1mile/h
Forward - 1 4.1mile/h
Forward - 2 7.7mile/h
Forward - 3 13.5mile/h
Forward - 4 24.4mile/h

Sound

+ -
Note The sound values are for specific operating conditions only.
Note Machine and operator sound levels will vary at different engine and/or cooling fan speeds.
Note Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained.
Note (4) Hearing protection may be needed when the doors and/or windows are open for extended periods or in a noisy environment.
Operator sound pressure level (ISO 6396:2008) 67dB(A)
Exterior sound power level (ISO 6395:2008) 107dB(A)
Exterior sound pressure level (SAE J88:2013) 76dB(A)
Note (1) The sound values are for specific operating conditions only.
Note (2) Machine and operator sound levels will vary at different engine and/or cooling fan speeds.
Note (3) Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained.
Operator Sound Pressure Level - ISO 6396:2008 67dB(A)
Exterior Sound Power Level - ISO 6395:2008 107dB(A)
Exterior Sound Pressure Level - SAE J88:2013 76dB(A)

Weights

+ -
Operating Weight* 51176lb
Note *For 4.2 m3 (5.5 yd3) general purpose buckets with BOCE.
*This estimate is for the base rental charge only. Other fees and charges may apply and will be calculated at the time of rental. Does not include delivery fees.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.