982M Wheel Loader
360° Exterior View
360° Interior View
At a Glance
|
|
|
|
|
|
|
|
Overview
The new 982M Wheel Loader has either a Tier 2/Stage II, Tier 3/Stage IIIA equivalent or Tier 4 Final/Stage IV, depending on emission standards of specific country, engine equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically lets us meet your high expectations for productivity and fuel efficiency. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to you. The reliability, durability, and versatility of the 982M result in a machine that is better built to meet your needs. The all-purpose 982M machine is a great 2-pass match for larger on-highway trucks, bank excavation and even face loading in well shot rock loading applications. The 982M has longer standard lift arms than the 980M making it a great rail car loader due to the higher hinge pin height. With a full range of bucket sizes and types, the 982M provides you an exciting new option in this size class.
Expand All +
Engine
+ -| Net Power - ISO 9249 | 398hp |
| Net Power - ISO 9249 | 398HP |
| Engine Model | Cat® C13 ACERT™ |
| Engine Model | Cat? C13 ACERT? |
| Bore | 5.12in |
| Stroke | 6.18in |
| Displacement | 763.0in3 |
| U.S. EPA Tier 4 Final/EU Stage IV - Maximum Power - SAE J1995 | 436HP |
| Tier 2/Stage II, Tier 3/Stage IIIA Equivalent: Maximum Power – SAE J1995 | 436hp |
| Maximum Net Power (1,700 rpm) – SAE J1349 | 398hp |
| Maximum Net Power – SAE J1349 | 398hp |
| Maximum Net Torque (1,100 rpm) – SAE J1349 | 1518lbf-ft |
| Peak Gross Torque (1,200 rpm) – SAE J1995 | 1627lbf-ft |
| Emissions | Cat engine with ACERT Technology – meets Tier 4 Final emission standards. |
| Note | The power ratings apply at the stated speed when tested under the reference conditions for the specified standards. |
| Note | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment. |
| Note | The gross power advertised is with the fan at maximum speed. |
| Tier 2/Stage II, Tier 3/Stage IIIA Equivalent: Maximum Power - SAE J1995 | 436HP |
Weights
+ -| Operating Weight | 78402lb |
| Operating Weight | 78402lb |
| Note | For 6.1 m3 (8.0 yd3) general purpose buckets with BOCE. |
| Note | Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, |
| Note (1) | For 6.1 m3 (8.0 yd3) general purpose buckets with BOCE. |
| Note (2) | Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, |
Buckets
+ -| Bucket Capacities | 4.6-12.0 m3 (6.0-15.75 yd3) |
| Bucket Capacities | 4.6-12.0 m3 (6.0-15.75 yd3) |
Transmission
+ -| Forward 1 | 3.9mph |
| Forward - 1 | 3.9mile/h |
| Forward 2 | 7.4mph |
| Forward - 2 | 7.4mile/h |
| Forward 3 | 13.1mph |
| Forward - 3 | 13.1mile/h |
| Forward 4 | 23.3mph |
| Forward - 4 | 23.3mile/h |
| Reverse 1 | 4.3mph |
| Reverse - 1 | 4.3mile/h |
| Reverse 2 | 8.5mph |
| Reverse - 2 | 8.5mile/h |
| Reverse 3 | 15.0mph |
| Reverse - 3 | 15mile/h |
| Reverse 4 | 24.5mph |
| Reverse - 4 | 24.5mile/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
Axles
+ -| Front | Fixed |
| Front | Fixed |
| Rear | Oscillating ±13 degrees |
| Rear | Oscillating ?13 degrees |
| Maximum Single-Wheel Rise and Fall | 1.87ft |
| Maximum Single-Wheel Rise and Fall | 1.87ft |
Brakes
+ -| Brakes | Brakes meet ISO 3450:2011 standards |
| Brakes | Brakes meet ISO 3450:2011 standards |
Cab
+ -| ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
| ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
Operating Specifications
+ -| Breakout Force | 58450lbf |
| Breakout Force | 58450lb |
| Static Tipping Load – Full 40° Turn: No Tire Deflection | 49368lb |
| Static Tipping Load – Full 40° Turn: With Tire Deflection | 46473lb |
| Note | Full compliance to ISO (2007) 143971 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 49368lb |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | 46473lb |
| Note | Full compliance to ISO (2007) 143971 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Hydraulic System
+ -| Hydraulic Cycle Time - Rated Payload - Dump, at Maximum Raise | 1.7s |
| Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down | 3.1s |
| Hydraulic Cycle Time - Rated Payload - Raise from Carry Position | 5.3s |
| Hydraulic Cycle Time - Rated Payload - Total | 10.1s |
| Implement Pump Type | Variable Displacement Piston |
| Implement System - Maximum Operating Pressure | 4975psi |
| Implement System: Maximum Pump Output (2,250 rpm) | 119gal/min |
| Implement System: Optional 3rd Function Maximum Flow | 63gal/min |
| Implement System: Optional 3rd Function Maximum Pressure | 3159psi |
| Implement System - Maximum Pump Output at 2,250 rpm | 119gal/min |
| Implement System - Optional 3rd Function Maximum Flow | 63gal/min |
| Implement System - Optional 3rd Function Maximum Pressure | 3159psi |
Service Refill Capacities
+ -| Cooling System | 14.0gal |
| Crankcase | 9.8gal |
| Transmission | 20.3gal |
| Differentials and Final Drives – Front | 24.3gal |
| Differentials and Final Drives – Rear | 24.3gal |
| Hydraulic Tank | 40gal |
| DEF Tank | 5.5gal |
| Fuel Tank | 112.5gal |
| Cooling System | 14gal (US) |
| Crankcase | 9.8gal (US) |
| DEF Tank | 5.5gal (US) |
| Differential - Final Drives - Front | 24.3gal (US) |
| Differential - Final Drives - Rear | 24.3gal (US) |
| Fuel Tank | 112.5gal (US) |
| Hydraulic Tank | 40gal (US) |
| Transmission | 20.3gal (US) |
Sound (Tier 2/Stage II, Tier 3/Stage IIIA equivalent)
+ -| Exterior Sound Power Level (ISO 6395:2008)* | 112dB(A) |
| Exterior Sound Pressure Level (SAE J88:2013)** | 78dB(A) |
| Note | The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not proper |
| Note | *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value. |
| Note | **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum |
Sound
+ -| Note | The sound values are for specific operating conditions only. |
Sound - Tier 2/Stage II, Tier 3/Stage IIIA Equivalent
+ -| Operator Sound Pressure Level - ISO 6396:2008 | 75dB(A) |
| Exterior Sound Power Level - ISO 6395:2008* | 112dB(A) |
| Exterior Sound Pressure Level - SAE J88:2013** | 78dB(A) |
| Note (1) | The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not proper |
| Note (2) | *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value. |
| Note (3) | **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum |
Engine (Tier 2/Stage II, Tier 3/Stage IIIA equivalent)
+ -| Engine Model | Cat C13 ACERT |
| Maximum Power (1,800 rpm) – SAE J1995 | 412hp |
| Maximum Net Power (1,800 rpm) – SAE J1349 | 373hp |
| Peak Gross Torque (1,300 rpm) – SAE J1995 | 1617lbf-ft |
| Maximum Net Torque (1,000 rpm) – SAE J1349 | 1505lbf-ft |
| Bore | 5.12in |
| Stroke | 6.18in |
| Displacement | 763in3 |
| Emissions | Cat engine with ACERT Technology – meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards. |
Engine (Tier 4 Final/Stage IV)
+ -| Engine Model | Cat C13 ACERT |
| Maximum Power (1,700 rpm) – SAE J1995 | 436hp |
| Maximum Net Power (1,700 rpm) – SAE J1349 | 398hp |
| Peak Gross Torque (1,200 rpm) – SAE J1995 | 1627lbf-ft |
| Maximum Net Torque (1,100 rpm) – SAE J1349 | 1518lbf-ft |
| Bore | 5.12in |
| Stroke | 6.18in |
| Displacement | 763in3 |
| Emissions | Cat engine with ACERT Technology – meets Tier 4 Final/Stage IV emission standards. |
| Note | The power ratings apply at the stated speed when tested under the reference conditions for the specified standards. |
| Note | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment. |
| Note | The gross power advertised is with the fan at maximum speed. |
Sound (Tier 4 Final/Stage IV)
+ -| Note | The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not proper |
| Operator Sound Pressure Level (ISO 6396:2008) | 72dB(A) |
| Exterior Sound Power Level (ISO 6395:2008)* | 112dB(A) |
| Exterior Sound Pressure Level (SAE J88:2013)** | 78dB(A) |
| Note | *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value. |
| Note | **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum |
Engine - Tier 2/Stage II, Tier 3/Stage IIIA Equivalent
+ -| Bore | 5.12in |
| Displacement | 763in³ |
| Emissions | Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards. |
| Engine Model | Cat C13 ACERT |
| Maximum Net Power - 1,800 rpm - SAE J1349 | 373HP |
| Maximum Net Torque - 1,000 rpm - SAE J1349 | 1505ft·lbf |
| Maximum Power - 1,800 rpm - SAE J1995 | 412HP |
| Peak Gross Torque - 1,300 rpm - SAE J1995 | 1617ft·lbf |
| Stroke | 6.18in |
Engine - Tier 4 Final/Stage IV
+ -| Bore | 5.12in |
| Displacement | 763in³ |
| Emissions | Cat engine with ACERT Technology ? meets Tier 4 Final/Stage IV emission standards. |
| Engine Model | Cat C13 ACERT |
| Maximum Net Power - 1,700 rpm - SAE J1349 | 398HP |
| Maximum Net Torque - 1,100 rpm - SAE J1349 | 1518ft·lbf |
| Maximum Power - 1,700 rpm - SAE J1995 | 436HP |
| Note (1) | The power ratings apply at the stated speed when tested under the reference conditions for the specified standards. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment. |
| Note (3) | The gross power advertised is with the fan at maximum speed. |
| Peak Gross Torque - 1,200 rpm - SAE J1995 | 1627ft·lbf |
| Stroke | 6.18in |
Sound - Tier 4 Final/Stage IV
+ -| Exterior Sound Power Level - ISO 6395:2008* | 112dB(A) |
| Exterior Sound Pressure Level - SAE J88:2013** | 78dB(A) |
| Note (1) | The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not proper |
| Note (2) | *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value. |
| Note (3) | **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum |
| Operator Sound Pressure Level - ISO 6396:2008 | 72dB(A) |
Standard Equipment:
Operator Environment
-
Cab, pressurized and sound suppressed (ROPS/FOPS)
-
Viscous mounts
-
Multi-function 18 cm (7 in) color LCD touch-screen display for rear vision camera and machine parameters.
-
Electro-hydraulic controls, SAL (single axis lever) lift and tilt function
-
Steering, electro-hydraulic joystick, speed sensing with force feedback
-
Radio ready (entertainment) includes antenna, speakers and converter (12V, 10-amp)
-
Air conditioner, heater, and defroster (auto temp and fan)
-
Electro-hydraulic parking brake
-
Beverage holders (2) with storage compartment for cell phone/MP3 player
-
Bucket/work tool function lockout
-
Coat hook (2)
-
Cab air filter
-
Ergonomic cab access ladders and handrails
-
Horn, electric
-
Light, two dome (cab)
-
Mirrors, rearview external with integrated spot mirrors
-
Post mounted membrane 16 switch keypad
-
3 receptacles, 12V
-
Seat, Cat Comfort (cloth) air suspension
-
Seat belt, 51 mm (2 in) retractable, with indicator
-
Sun visor, front
-
Wet-arm wipers/washers front and rear, intermittent front wiper
-
Window, sliding (left and right sides)
-
Cab tie-off
Computerized Monitoring System
-
With following gauges: – Speedometer/tachometer – Digital gear range indicator – Diesel Exhaust Fluid (DEF) level – Temperature: engine coolant, hydraulic oil, transmission oil – Fuel level
-
With following warning indicators: – Regeneration – Temperature: axle oil, engine intake manifold – Pressure: engine oil, fuel pressure hi/low, primary steering oil, service brake oil – Battery voltage hi/low – Engine air filter restriction – Hydraulic oi
Electrical And Lighting
-
Batteries (2), maintenance free 1,400 CCA
-
Ignition key; start/stop switch
-
Starter, electric, heavy duty
-
Starting and charging system (24V)
-
Lighting system: – Four halogen work lights (cab mounted) – Two halogen roading lights (with signals) – Two halogen rear vision lights (hood mounted)
-
Alarm, back-up
-
Alternator, 145-amp brushed
-
Main disconnect switch
-
Receptacle start (cables not included)
Cat Connect Technologies
-
Link technologies: Product Link
-
Detect technologies: rear vision camera
Power Train
-
Engine, Cat C13 ACERT – meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent or Tier 4 Final/Stage IV emission standards
-
Cat Clean Emissions Module (CEM) with Diesel Particulate Filter (DPF) and remote Diesel Exhaust Fluid tank and pump
-
Fuel priming pump (electric)
-
Fuel/water separator
-
Precleaner, engine air intake
-
Economy mode (selectable)
-
Transmission, automatic planetary power shift (4F/4R)
-
Torque converter, locking clutch with free wheel stator
-
Switch, transmission neutralizer lockout
-
Axles, open differential, front and rear
-
Heavy duty transmission
-
Axles, ecology drains
-
Brakes, full hydraulic enclosed wet-disc with Integrated Braking System (IBS)
-
Brake wear indicators
-
Parking brake, disc and caliper
-
Fan, radiator, on demand
Linkage
-
Linkage, Z-bar, cast crosstube/tilt levers
-
Kickout, lift and tilt, automatic (adjustable in cab)
Hydraulics
-
Hydraulic system, load sensing
-
Steering, load sensing
-
Ride control, 2V
-
Remote diagnostic pressure taps
-
Hoses, Cat XT™
-
Couplings, Cat O-ring face seal
-
Hydraulic oil cooler (swing out)
-
Oil sampling valves
Fluids
-
Premixed extended life coolant with freeze protection to –34° C (–29° F)
Other Standard Equipment
-
One-piece tilting hood with side and rear doors
-
Service centers (electrical and hydraulic)
-
Platform, window washing
-
Auto idle shutdown
-
Fenders, non-metallic front with mud-flap/rear with extension
-
Ecology drains for engine, transmission, and hydraulics
-
Ether aid ready
-
Grill, airborne debris
-
Filters: fuel, engine air, engine oil, hydraulic oil, transmission
-
Fuel cooler
-
Grease zerks
-
Hitch, drawbar with pin
-
Precleaner rain cap
-
Sight gauges: engine coolant, hydraulic oil, and transmission oil level
-
Toolbox
-
Vandalism protection caplocks
Optional Equipment:
Operator Environment
Door, remote opening system
Cover, HVAC metallic
EH controls, SAL 3rd function
EH controls, joystick lift and tilt: – Additional integrated roller switch for 3rd function
Filter, carbon fresh air
Mirrors, heated rearview external with integrated spot mirrors
Precleaner, HVAC
Precleaner, HVAC (RESPA)
Radio, AM/FM/USB/MP3 Bluetooth
Radio, AM/FM/CD/USB/MP3 Bluetooth
Radio, AM/FM/CD/USB/MP3 Bluetooth with Satellite Sirius and XM
Radio, CB ready
Seat, heated air suspension
Seat belt, 76 mm (3 in) retractable, with indicator
Steering, EH wheel with directional FNR shifter and gear selector: – Additional FNR with implement controls
Roof, metallic
Steering, secondary
Sun visor, rear
Windows, rubber mounted
Windows, with front guard
Windows, with heavy duty front guard
Windows, with full guards front, rear and sides
Electrical And Lighting
Four additional auxiliary halogen cab mounted work lights or
Two additional auxiliary front HI LED and two additional auxiliary rear LED cab mounted work lights with two LED work lights in the radiator grill and LED front turn signals also includes replacement of the standard four halogen cab mounted work lights wi
Warning amber strobe beacon
Reversing strobes
External seat belt indicator light
Speed limiter – 20 km/h (Europe only)
Starters, Batteries, And Alternators
Batteries (4), maintenance free 1,400 CCA with 120V engine coolant heater
Batteries (4), maintenance free 1,400 CCA with 240V engine coolant heater
Cat Connect Technologies
Payload technologies: – Advanced Productivity subscription – Cat Production Measurement 2.0 – Printer – Aggregate Autodig
Detect technologies: – Cat Rear Object Detection
Machine Security System
Power Train
Axles: – Limited slip differentials, front and/or rear – Axle oil cooler – Extreme temperature seals
Fan, VPF (variable pitch fan), automatic and manual control
Radiator, high debris with wider fin spacing
Linkage
Quick coupler ready
Work Tools
Performance Series buckets
Forks, pallet
Forks, logging
Hydraulics
3rd function with Ride Control: – Standard linkage – High lift linkage – Logger linkage
Fluids
Premixed extended life coolant with freeze protection to –50° C (–58° F)
Other Optional Equipment
Cat Autolube System
Wheel chocks
Fenders, roading
Guard, power train
Oil change, high speed engine
Fuel tank, fast fill
Precleaner, turbine
Precleaner, trash
Other Optional Configuration
Aggregate Handler
*This estimate is for the base rental charge only. Other fees and charges may apply and will be calculated at the time of rental. Does not include delivery fees.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.