XQ100
At a Glance
|
|
|
|
Overview
Expand All +
Generator Set
+ -Rating | 100 ekW (125 kVA) Standby |
Frequency | 60 Hz |
Voltage | 208 - 480 V |
Prime Rating | 90 ekW (112.5 kVA) |
Engine
+ -Engine | C4.4 Turbo |
Fuel | Diesel |
Dimensions
+ -Width | 44.5in |
Height | 73.6in |
Length | 129.1in |
Weight - With Lube Oil and Coolant | 5501lb |
Standard Equipment:
Engine
-
Heavy duty industrial EPA Tier 3 diesel engine
Cooling Radiator
-
Dual Bus Connections NEMA 1 enclosure with hinged lockable door and main bus connection studs enclosed with hinged transparent cover for easy access and operator safety.
Engine Filtration System
-
Cartridge type dry air filters with restriction indicator.
Exhaust System
-
Critical silencer with flexible connector. All internal pipework lagged.
Electrical System
-
12 volt system with 65A battery charging alternator and starter motor on engine, battery rack mounted on the generator set baseframe.
Generator
-
Screen protected and drip-proof, self exciting, self-regulating brushless generator.
Mounting Arrangement
-
Baseframe - The complete generator set is mounted on a heavy duty fabricated steel baseframe. The baseframe includes a UL listed dual wall closed top fuel tank and incorporates specially designed lifting points.
Fuel System
-
Fuel feed and return lines to the engine are terminated at the baseframe mounted 24 hour extended capacity fuel tank. 3-way valves allow connection of auxiliary fuel tank.
Control System
-
EMCP 4.2 in a vibration isolated NEMA 1 sheet steel enclosure with a hinged lockable door.
Distribution Panel
-
Dual Bus Connections NEMA 1 enclosure with hinged lockable door and main bus connection studs enclosed with hinged transparent cover for easy access and operator safety.
Documentation
-
A full set of operation and maintenance manuals, circuit wiring diagrams, and instruction leaflets is provided.
Sound Attenuated Enclosure
-
A noise reducing enclosure surrounds the entire generator set.
Factory Tests
-
The generator set is load tested before dispatch.
Equipment Finish
-
All sheet metal components including the enclosure and the base tank are fully degreased, phosphated and chromated for anti-corrosive protection prior to painting with polyester powder.
Standards
-
The equipment meets the following standards: BS4999, BS5000, BS5514, IEC60034, EN61000-6, NEMA MG-1.22.
Warranty
-
Full manufacturer's warranty.
Optional Equipment:
Engine
Battery charger
Anti-condensation heater 110-120 VAC
Coolant Heater 110-120 VAC
Generator
Anti-condensation heater 110-120V AC
Cooling System
Coolant heater 110-120V AC
Trailer
Single axle, hydraulic or electric brake
Miscellaneous Accessories
Additional operator's manual pack
French or Spanish language labels
Extended Service Coverage
Extended service coverage available
*This estimate is for the base rental charge only. Other fees and charges may apply and will be calculated at the time of rental. Does not include delivery fees.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.