At a glance data:
Maximum Power:
2100hp
Maximum Torque:
7563lb-ft @ 1300 rpm
Rated Speed:
1750 rpm
Minimum Power:
2100hp
Overview
The Cat 3516C is offered at 1506 bkW (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. It offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps.
Category:
Industrial Diesel Engines
Category:
Industrial Diesel Engines
Brand:
Caterpillar
Brand:
Caterpillar
Power Rating
Maximum Power:
2100hp
Maximum Torque:
7563lb-ft @ 1300 rpm
Rated Speed:
1750 rpm
Minimum Power:
2100hp
Emission Standards
Emissions:
U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
General
Engine Configuration:
V-16, 4-Stroke-Cycle Diesel
Bore:
6.7in
Stroke:
8.5in
Displacement:
4760in³
Compression Ratio:
14.7:1
Aspiration:
Turbocharged Aftercooled
Rotation from Flywheel End:
Counterclockwise
Aftertreatment:
-
Engine Dimensions - Approximate
Length:
129.1in
Width:
60.2in
Height:
81.2in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments:
17284lb
Standard Equipment
air inlet system
- Air to Air Aftercooled (ATAAC)
- Four turbochargers, center mounted
control system
- ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)
cooling system
- Thermostats and housing
- Gear driven centrifugal jacket water pump
- Connections for radiator cooling
exhaust system
- Exhaust manifold, dry
- Four turbochargers with watercooled bearings
- Two exhaust outlets, 203 mm (8 in) round flange
flywheels and flywheel housing
- SAE No. 00 flywheel (183 teeth)
- SAE No. 00 flywheel housing
fuel system
- Fuel filter, LH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors
instrumentation
- No standard instrument or gauge panel
lube system
- Crankcase breather, top mounted
- Oil cooler
- Oil filler and dipstick, LH
- Oil pump
- Oil filter, LH, spin-on type
- Front sump oil pan, 500-hour change interval
mounting system
- Trunnion front support
power take off
- Front housing, two-sided
protection system
- ADEM A4 ECM monitoring system to provide customer programmable engine
- Deration strategies to protect against adverse operating conditions
- Emergency stop logic inputs provided at 40 pin customer interface connection
starting system
- Dual 24V electric starting motor, LH, unwired
general
- Paint: Caterpillar yellow
- Vibration damper
- Lifting eyes
Optional Equipment
Similar Products
Cat® C0.5 Diesel Engine
Maximum Power:
2100hp
Maximum Torque:
7563lb-ft @ 1300 rpm
Rated Speed:
1750 rpm
Minimum Power:
2100hp
Cat C4.4 Diesel Engine
Maximum Power:
2100hp
Maximum Torque:
7563lb-ft @ 1300 rpm
Rated Speed:
1750 rpm
Minimum Power:
2100hp
Cat® C27 Diesel Engine
Maximum Power:
2100hp
Maximum Torque:
7563lb-ft @ 1300 rpm
Rated Speed:
1750 rpm
Minimum Power:
2100hp