At a glance data:
Maximum Power:
950hp
Maximum Torque:
3211lb-ft @ 1200 rpm
Rated Speed:
1800 rpm
Minimum Power:
800hp
Overview
The Cat® C27 Industrial Power Unit is offered in ratings ranging from 597-783 bkW (800-1050 bhp)@ 1800 rpm. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
Category:
Industrial Diesel Power Units
Category:
Industrial Diesel Power Units
Brand:
Caterpillar
Brand:
Caterpillar
Power Rating
Maximum Power:
950hp
Maximum Torque:
3211lb-ft @ 1200 rpm
Rated Speed:
1800 rpm
Minimum Power:
800hp
Emission Standards
Emissions:
U.S. EPA Tier 4 Final, EU Stage V
General
Engine Configuration:
V-12, 4-Stroke-Cycle Diesel
Bore:
5.7in
Stroke:
6in
Displacement:
1649.5in³
Compression Ratio:
16.0:1
Aspiration:
Twin Turbocharged-Aftercooled (TTA)
Rotation from Flywheel End:
Counterclockwise
Aftertreatment:
DOC
Standard Equipment
air inlet system
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
control system
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Remote fan control
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
cooling system
- Thermostats and housing, vertical outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
flywheels and flywheel housing
- Choice of SAE No. 0 or SAE No. 1 flywheel housing
- Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
fuel system
- MEUI injection
- Primary fuel filter
- Secondary fuel filters
- Fuel transfer pump
- Electronic fuel priming
lube system
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
power take off (pto)
- SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
general
- Paint: Caterpillar yellow, with optional colors available at request
u.s. epa tier 4 final, eu stage iv aftertreatment/ clean emissions control equipment
- Cat Regeneration System
- Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- Aftertreatment Electronic Control Unit (ECU)
- NOx Reduction System (NRS)
- Pump Electronic Control Unit (PETU)
- Selective Catalytic Reduction (SCR)
- Available in 12V or 24V systems
Optional Equipment
Similar Products
Cat® C32 Industrial Power Unit
Maximum Power:
950hp
Maximum Torque:
3211lb-ft @ 1200 rpm
Rated Speed:
1800 rpm
Minimum Power:
800hp
Cat® C4.4 Industrial Power Unit
Maximum Power:
950hp
Maximum Torque:
3211lb-ft @ 1200 rpm
Rated Speed:
1800 rpm
Minimum Power:
800hp
Cat® C7.1 Industrial Power Unit
Maximum Power:
950hp
Maximum Torque:
3211lb-ft @ 1200 rpm
Rated Speed:
1800 rpm
Minimum Power:
800hp