At a glance data:
Engine Model:
Cat® C3.6
Power - Net:
104hp
Displacement:
220in³
Net Power - 2,200 rpm - SAE J1349:
104hp
Overview
The Cat® D3 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.
Category:
Small Dozers
Category:
Small Dozers
Brand:
Caterpillar
Brand:
Caterpillar
Engine
Engine Model:
Cat® C3.6
Power - Net:
104hp
Displacement:
220in³
Net Power - 2,200 rpm - SAE J1349:
104hp
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269:
104hp
Note (1):
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Engine
Power Train :
Hydrostatic
Engine
Note (2):
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Weights
Operating Weight:
20639.68lb
Operating Weight:
20640lb
Operating Weight - LGP:
21369lb
Operating Weight - LGP, 762 mm/30 in:
21810lb
Note (2):
For machine with ripper, add 554 kg (1,222 lb).
Note (1):
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Cab
ROPS:
ISO 3471:2008
FOPS:
ISO 3449:2005 Level II
Transmission
Drive Pumps:
1
Maximum Travel Speed - Forward:
5.6mile/h
Maximum Travel Speed - Reverse:
6.2mile/h
Track Motors:
2
Relief Valve Settings:
7033psi
Undercarriage
Shoe Width - Standard:
20in
Ground Pressure - LGP:
4.5psi
Track Gauge - LGP:
69in
Length - Track on Ground - LGP:
91in
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage:
40
Ground Pressure - LGP, 762 mm (30 in):
3.9psi
Length - Track on Ground - LGP, 762 mm (30 in):
91in
Shoe Width - LGP:
26in
Shoe Width - LGP, 762 mm (30 in):
30in
Track Gauge:
63in
Number of Rollers - Each Side:
7
Track Gauge - LGP, 762 mm (30 in):
73in
Undercarriage
Ground Pressure :
5.7psi
Length of Track on Ground :
91in
Number of Shoes - Each Side - Abrasion Undercarriage :
36
Service Refill Capacities
Cooling System:
5gal (US)
Final Drive - Each - LGP:
2.6gal (US)
Crankcase - With Filter:
2.8gal (US)
Diesel Exhaust Fluid (DEF) Tank:
4.9gal (US)
Transmission - Hydraulic Tank:
23.8gal (US)
Fuel Tank:
51.5gal (US)
Service Refill Capacities
Final Drives - Each Side :
2.6gal (US)
Hydraulic Controls
Pump Output:
17.2gpm
Relief Valve Settings:
2988psi
Ripper
Type:
Parallelogram
Number of Shanks:
3
Height:
6.5in
Weight:
1222lb
Maximum Digging Depth:
13.3in
Maximum Reach - Ground Line:
30.2in
Overall Width:
67.3in
Maximum Ground Clearance Under Tip:
17.6in
Air Conditioning System
Air Conditioning:
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe). See label or instruction manual for gas refrigerant identification. If machine is equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (4.0 lbs) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.873 tons). If machine is equipped with R1234yf (Global Warming Potential = 0.501), the system contains 1.7 kg (3.75 lbs) of refrigerant, which has a CO2 equivalent of less than 0.001 metric tonnes (0.001 tons).
Dimensions
BLADE: Blade Width - LGP:
126.7in
Track Gauge - LGP, 762 mm (30 in):
73in
BLADE: Digging Depth - LGP:
23.2in
Track Gauge - LGP:
67.9in
BLADE: Blade Capacity (SAE) - LGP:
3.06yd³
BLADE: Blade Width at Maximum Angle - LGP:
115.8in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP:
52° to 58°
Ground Clearance - LGP, 762 mm (30 in):
13in
BLADE: Blade Height - LGP:
39.8in
BLADE: Blade Lift Height - LGP:
30.2in
Ground Clearance - LGP:
13in
Overall Length - With Blade - LGP, 762 mm (30 in):
169.6in
Overall Length - With Blade - LGP:
169.6in
BLADE: Maximum Tilt - LGP:
17.7in
BLADE: Maximum Angle (either side) - LGP:
25°
Dimensions
BLADE: Blade Capacity (SAE) - Standard :
2.86yd³
Track Gauge - Standard :
63in
BLADE: Digging Depth - Standard :
23.8in
BLADE: Blade Lift Height - Standard :
30.2in
Ground Clearance - Standard :
13in
Overall Length - With Blade - Standard :
170.7in
BLADE: Blade Cutting Edge Angle, Adjustable - Standard :
52° to 58°
BLADE: Blade Height - Standard :
42.2in
BLADE: Maximum Tilt - Standard :
15.8in
Note :
Abrasion Undercarriage
BLADE: Blade Width - Standard :
109.5in
BLADE: Blade Width at Maximum Angle - Standard :
103.8in
BLADE: Maximum Angle (either side) - Standard :
25°
Dimensions
Note:
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
Length of Basic Dozer (without blade) - Standard:
128.7in
Dozer Height - Standard:
109in
Width of Dozer (standard shoes, no blade) - LGP:
94.9in
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in):
103.5in
Length of Basic Dozer (without blade) - LGP:
128.7in
Dozer Height - LGP, 762 mm (30 in):
109in
Width of Dozer (standard shoes, no blade) - Standard:
83in
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in):
128.7in
Dozer Height - LGP:
109in
Retrieval Winch
Maximum Line Pull - Bare Drum:
32150lb
Control:
Hydraulic
Rope Diameter - Optional:
0.75in
Drum Capacity - Optional Cable:
195ft
Maximum Line Speed - Full Drum:
79ft/min
Drum Capacity - Recommended Cable:
277ft
Winch Drive:
Hydraulic
Weight:
1747lb
Maximum Line Pull - Full Drum:
20350lb
Rope Diameter - Recommended:
0.63in
Maximum Line Speed - Bare Drum:
50ft/min
Speed:
Variable
Winch Length:
35.63in
Drum Diameter:
8in
Overall width:
27.91in
Drum Width:
9.65in
Throat Clearance:
5.6in
High Performance Winch
Winch length:
27.76in
Rope diameter – optional:
0.75in
Maximum line speed – bare drum:
131ft/min
Maximum line pull – bare drum:
40000lb
Weight:
1345lb
Drum capacity – optional:
256ft
Maximum line speed – full drum:
207ft/min
Rope diameter – recommended:
0.63in
Winch drive:
Hydrostatic
Throat clearance:
6.75in
Drum diameter:
10in
Overall width:
29.2in
Drum width:
10.8in
Maximum line pull – full drum:
25000lb
Speed:
Variable
Drum capacity – recommended cable:
371ft
Control:
Hydraulic
Standard Equipment
power train
- Air cleaner with precleaner, automatic dust ejection and underhood intake
- Aluminum bar plate cooling system (radiator, power train)
- Automatic traction control
- Cat C3.6 diesel engine
- Drive, auxiliary
- Dual path, closed loop, hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Turbocharged aftercooled
electrical
- Alarm, backup
- Alternator, 150 amp, heavy duty
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Four integrated front halogen lights, two rear halogen
- Horn, electric
- Starter, electric, 12 V, heavy duty
undercarriage
- Heavy Duty (HD) Undercarriage (40 section)
- Carrier rollers
- Guards, front/rear guiding
- Seven roller track frame
- Track adjusters, hydraulic
- Track rollers, lifetime lubricated
hydraulic
- Hydraulic pump and oil
- Single lever, three function control
- Three valve hydraulics
cat technology
- Slope Indicate
- Stable Blade – Basic Lift
- Third party 3D grade system compatible
- Cat Product Link™ PLE643/PLE743 Cellular
operator environment
- Armrests, adjustable
- Coat hook
- Controls, seat mounted, fore/aft adjustment
- Cup holders
- Eco Mode
- Electronic Monitoring system with gauge:
– Chassis slope indication
– Diesel exhaust fluid (DEF)
– Engine coolant temperature
– Fuel level
– Hydraulic oil temperature - Electronic security system
- Engine air cleaner service indicator
- Engine RPM and gear display
- Floor mat, rubber, heavy duty
- Foot pads, dash
- Hour meter, electronic
- Independent forward/reverse speed settings
- Mirror, rearview, inside
- Power port, 12 volt
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, hi-vis retractable 76 mm (3")
- Seatbelt buckling indicator/reminder
- Single pedal combining decel and brake functions
- Speed recall
- Storage compartment
- Throttle switch, rotary
- Travel speed limiter, electronic
Optional Equipment
power train
- Air cleaner with external precleaner
- Installation, winch
electrical
- Four integrated front LED lights, two rear LED
undercarriage
- Abrasion Undercarriage (36 section)
- Track Pairs
– Track, 510 mm (20 in)
– Track, 660 mm (26 in)
– Track, 762 mm (30 in)
hydraulic
- Four valve for use with ripper
- Four valve for use with winch
cat technology
- Assist with Attachment Ready Option (ARO) includes:
– Slope Indicate
– Blade Load Monitor
– Stable Blade Lift and Tilt
– Slope Assist
– Traction Control
– Steer Assist
– AutoCarry - Grade 3D with Assist includes:
– Same Assist with ARO features
– Steer Assist 3D
– Grade 3D - Cat Product Link PLE683/PLE783 Cellular/Satellite
- Full-color 254 mm (10 in) touchscreen grade display
- Cat Command Console (availability varies by region)
- Cat Command Station (availability varies by region)
operator environment
- Power Pitch
- Cab, with air conditioning
- Cab, polycarbonate windows and air conditioning
- Radio, AM/FM Bluetooth®
- Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controls - Sound suppression
other
- Heater, engine, coolant 120 V/240 V
- Starting aid, ether
Similar Products
D1 Dozer
Engine Model:
Cat® C3.6
Power - Net:
104hp
Displacement:
220in³
Net Power - 2,200 rpm - SAE J1349:
104hp
D3 Track-Type Tractor
Engine Model:
Cat® C3.6
Power - Net:
104hp
Displacement:
220in³
Net Power - 2,200 rpm - SAE J1349:
104hp
D2 Dozer
Engine Model:
Cat® C3.6
Power - Net:
104hp
Displacement:
220in³
Net Power - 2,200 rpm - SAE J1349:
104hp