305 CR Mini Hydraulic Excavator
- new - Products
- 305 CR Mini Hydraulic Excavator
At a glance data:
Engine Model:
C1.7 Turbo
machine
new
The Cat® 305 CR Mini Excavator delivers power and performance in a compact size to help you work in a wide range of applications.
Overview
The Cat® 305 CR Mini Excavator delivers power and performance in a compact size to help you work in a wide range of applications.
Category:
Mini Excavators
Category:
Mini Excavators
Brand:
Caterpillar
Brand:
Caterpillar
Engine
Net Power:
45hp
Engine Model:
C1.7 Turbo
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC:
45hp
Gross Power - 2,400 rpm - SAE J1995:2014:
48.4hp
Bore:
3.3in
Stroke:
3.9in
Displacement:
101in³
Emissions:
The Cat® C1.7 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note:
Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2):
Net power advertised is the power available at the flywheel when the engine is at the rated speed of 2400 rpm and the engine is installed with the factory configured fan, air intake system, exhaust system and alternator with a minimum alternator load.
Weights
Operating Weight:
12688lb
Minimum Operating Weight with Canopy*:
11016lb
Maximum Operating Weight with Canopy**:
12469lb
Minimum Operating Weight with Cab*:
11234lb
Maximum Operating Weight with Cab**:
12688lb
Note (1):
*Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, straight blade, no bucket and no extra counterweight.
Note (2):
**Maximum Weight is based on steel tracks with pads, operator, full fuel tank, long stick, straight blade, extra counterweight and no bucket.
Weight Increase from Minimum Configuration
Counterweight:
534lb
Long Stick:
75lb
Steel Tracks with Pads:
827lb
Angle Blade:
225lb
Travel System
Travel Speed - High:
3.1mile/h
Travel Speed - Low:
1.7mile/h
Maximum Traction Force - High Speed:
5553lbf
Maximum Traction Force - Low Speed:
11353lbf
Ground Pressure - Minimum Weight:
4psi
Ground Pressure - Maximum Weight:
4.7psi
Gradeability - Maximum:
30 degrees
Service Refill Capacities
Cooling System:
2.9gal (US)
Engine Oil:
1.6gal (US)
Fuel Tank:
17gal (US)
Hydraulic Tank:
16gal (US)
Hydraulic System:
20gal (US)
Hydraulic System
Pump Flow at 2,400 rpm:
35gpm
Operating Pressure - Equipment:
3843psi
Operating Pressure - Travel:
3843psi
Operating Pressure - Swing:
2901psi
Auxiliary Circuit - Primary - Flow:
21gpm
Auxiliary Circuit - Primary - Pressure:
3843psi
Auxiliary Circuit - Secondary - Flow:
7gpm
Auxiliary Circuit - Secondary - Pressure:
3843psi
Digging Force - Stick - Standard:
6362lbf
Digging Force - Stick - Long:
5665lbf
Digging Force - Bucket:
11061lbf
Note:
Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
Type:
Load Sensing Hydraulics with Variable Displacement Piston Pump
Swing System
Machine Swing Speed:
9r/min
Boom Swing - Left:
72 Degrees
Boom Swing - Right:
50 Degrees
Blade
Straight Blade Width:
78in
Straight Blade Height:
15.4in
Angle Blade Width:
78in
Angle Blade Height:
15.7in
Angle Blade - Left:
25 degrees
Angle Blade - Right:
25 degrees
Certification - Cab and Canopy
Roll Over Protective Structure (ROPS):
ISO 12117-2:2008
Top Guard:
ISO 10262:1998 Level I
Dimensions - Standard Stick
Dig Depth:
134.6in
Vertical Wall:
91.9in
Maximum Reach - Ground Level:
220.1in
Maximum Reach:
226.6in
Maximum Dig Height:
205.3in
Maximum Dump Clearance:
145.7in
Boom In Reach:
101.2in
Tail Swing without Counterweight:
43.1in
Tail Swing with Counterweight:
47.2in
Maximum Blade Height:
15.2in
Maximum Blade Depth:
23.4in
Boom Height - Shipping Position:
71.7in
O/A Shipping Height:
100.4in
Swing Bearing - Height:
24.4in
O/A Undercarriage Length:
101.6in
Overall Shipping Length*:
208.9in
Boom Swing - Right:
34.1°
Boom Swing - Left:
24.2°
Track Belt/Shoe Width:
15.7in
Ground Clearance:
13.2in
Stick Length:
53.2in
Note:
*Overall Shipping Length depends on blade position during shipment.
Dimensions - Long Stick
Dig Depth:
144.5in
Vertical Wall:
100.8in
Maximum Reach - Ground Level:
229.7in
Maximum Reach:
235.8in
Maximum Dig Height:
210.8in
Maximum Dump Clearance:
151.4in
Boom In Reach:
101.6in
Tail Swing without Counterweight:
43.1in
Tail Swing with Counterweight:
47.2in
Maximum Blade Height:
15.2in
Maximum Blade Depth:
23.4in
Boom Height - Shipping Position:
74.6in
O/A Shipping Height:
100.4in
Swing Bearing - Height:
24.4in
O/A Undercarriage Length:
101.6in
Overall Shipping Length*:
210.2in
Boom Swing - Right:
34.1°
Boom Swing - Left:
615mm
Track Belt/Shoe Width:
15.7in
Track Width:
78in
Ground Clearance:
13.2in
Stick Length:
63in
Note:
*Overall Shipping Length depends on blade position during shipment.
Air Conditioning System
Air Conditioning:
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe) (Global Warming Potential = 1430). See label or instruction manual for gas refrigerant identification. The system contains 0.75 kg (1.65 lb), 0.90 kg (1.98 lb) or 1.0 kg (2.20 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons) for R134a and 0.001 tonnes (0.001 tons) for R1234yf (Europe).
Sound
Operator Sound Pressure (ISO 6396:2008):
76dB(A)
Average Exterior Sound Pressure (ISO 6395:2008):
97dB(A)
Note:
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed. **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Sustainability
Recyclability:
96%
Standard Equipment
engine
- Cat® C1.7 Turbo Engine (U.S. EPA Tier 4 Final)
- Automatic Engine Idle
- Automatic Engine Shutdown
- Automatic Two Speed Travel
- Fuel Water Separator
- Power on Demand (not available in all regions)
- Variable Displacement Piston Pump
- Load Sensing/Flow Sharing Hydraulics
hydraulics
- Smart Tech Electronic Pump
- Accumulator
- Automatic Swing Brake
- Auxiliary Hydraulic Lines
- One and Two Way Auxiliary Flow
- Continuous Auxiliary Flow
- Auxiliary Line Quick Disconnects
guarding
- ROPS ISO 12117-2:2008
- Top Guard ISO 10262:1998 (Level I)
other
- Eco Drain
operator environment
- LED Front and Rear Lights
- LED Boom Light
- Canopy or Cab
- Top Guard ISO 10262:1998 Level I
- ROPS – ISO 12117-2:2008
- TOPS – ISO 12117:1997
- Stick Steer Mode
- Travel Cruise Control
- Control Pattern Changer (optional in some regions)
- Adjustable Wrist Rests
- Washable Floor Mat
- Travel Pedals and Hand Levers
- Machine Security
- Machine Security – Standard Key with Pass Code
- Fabric Suspension Seat (Cab only)
- Vinyl Suspension Seat (Canopy only)
- Hydraulic Lockout – All Controls
- Retractable High Visibility Seat Belt (75 mm/3 in)
- Coat Hook
- Cup Holder
- Storage Pocket
- Skylight
- Mounting Bosses for Front
- Signaling/Warning Horn
- Interior Light (Cab only)
- Boom Light, Halogen (not available in all regions)
- Utility Space for Mobile Phone
- Next Generation Color LCD Monitor (IP66)
– Fuel Level and Coolant Temperature Gauges
– Maintenance and Machine Monitoring
– Performance and Machine Adjustments
– Numeric Security Code
– Multiple Languages
– Hour Meter with Wake Up Switch
– Jog Dial (cab only)
undercarriage
- Rubber Belt (400 mm/15.7 in)
- Dozer Straight Blade
- Dozer Blade Float
- Tie Downs on Track Frame
boom, stick and linkages
- One Piece Boom (2716 mm/106.9 in)
- Standard Stick (1351 mm/53.2 in)
- Front Shovel Capable – Pin-On
- Thumb Ready
- Certified Lifting Eye
electrical
- 12 Volt Battery
- Software (machine and monitor)
- Maintenance Free Battery
- Lock Out/Tag Out Battery Disconnect
- 12 Volt Power Socket
- Travel Alarm (optional in some regions)
Optional Equipment
undercarriage
- Steel Track (400 mm/15.7 in)
- Steel Track with Rubber Pads
- Angle Blade
boom, stick and linkages
- Long Stick (1601 mm/63.0 in)
- Front Shovel Capable – Dual Lock Manual Coupler
- Front Shovel Capable – Hydraulic Coupler
- Attachments including Couplers, Thumbs, Buckets, Augers and Hammers
- 2nd Auxiliary Hydraulic Lines
- Bucket Divert Lines
- Boom Lowering Check Valve
- Stick Lowering Check Valve
- Hydraulic Quick Coupler Lines
electrical
- Product Link™ PL243 (regulations apply)
- Product Link PLE643 (regulations apply)
other
- Bio Oil Capable
- Water Jacket Heater
- Counterweight (242 kg/534 lb)
operator environment
- Cab with Air Conditioning
- Cab with Heater
- No Travel Pedals and Hand Levers (optional in some regions)
- Machine Security – Push to Start with Key Fob/Pass Code
- Mirrors, Left, Right and Rear
- Camera
- Radio – Bluetooth®, Auxiliary, Microphone, USB (charging only) (Cab only)
- Next Generation Advanced Monitor
– Touch Screen
– Site Reference System
– High Definition Camera Capable (IP68 and IP69K)
– Numeric Security Code - Seat Belt Reminder System
- Cat Grade with Advanced 2D
- Cat Grade with 3D
guarding
- Top Guard ISO 10262:1998 (Level II)
- Front Guard (Mesh) ISO 10262:1998 (Level I)
- Front Guard (Heavy Duty) ISO 10262:1998 (Level II)
1300 mm (51 in) Skid Steer Coupler Class II Pallet Fork Carriage
Engine Model:
C1.7 Turbo